Investigation of pin-hole leaks in stainless steel water pipes

Fluids are transported, using austenitic stainless steel (SS) pipes of 3XX series to prevent corrosion products from contaminating them. Sudden failure of these pipes during operation may lead to high downtime costs and disastrous consequences. Repeated and similar leakage failure on SS pipes of 304 grade has been reported from many installations. The paper discusses and analyzes the many reasons for such failures and presents the investigations that were carried out on one such incident of the failure of pipes, which were used for circulating water. It also recommends the corrective actions to avoid recurrence of pipe leaks.

[1]  Robert G. J. Edyvean,et al.  Biofilms, mains water and stainless steel , 1998 .

[2]  M Suresh Kumar,et al.  Failure analysis of a stainless steel pipeline , 2008 .

[3]  A. E. Greenberg,et al.  Standard methods for the examination of water and wastewater : supplement to the sixteenth edition , 1988 .

[4]  Kaisa Simola,et al.  Comparative Study of Approaches to Estimate Pipe Break Frequencies , 2002 .

[5]  C.R.F. Azevedo,et al.  Failure analysis of a crude oil pipeline , 2007 .

[6]  E. Hoseinzadeh,et al.  Evaluation of Corrosion and Scaling Potential of a Water Treatment Plant , 2013 .

[7]  Sérgio Souto Maior Tavares,et al.  Failure analysis of duplex stainless steel weld used in flexible pipes in off shore oil production , 2010 .

[8]  H. M. Thomas,et al.  Pipe and vessel failure probability , 1981 .

[9]  Maneesh Kumar Singh,et al.  Handling of variability in probabilistic and possibilistic failure analysis of corroded pipes , 2014, Int. J. Syst. Assur. Eng. Manag..

[10]  Bengt Lydell,et al.  OPDE—The international pipe failure data exchange project , 2008 .

[11]  Jing He,et al.  Uptake of chloride ion from aqueous solution by calcined layered double hydroxides: equilibrium and kinetic studies. , 2006, Water research.

[12]  Ajit Srividya,et al.  Optimisation of ISI interval using genetic algorithms for risk informed in-service inspection , 2004, Reliab. Eng. Syst. Saf..

[13]  Ueli M. Angst,et al.  Mechanism of electrochemical chloride removal , 2007 .

[14]  Piyas Palit,et al.  An analysis—Premature failure of heat trace stainless tube , 2013 .

[15]  Uday Kumar,et al.  Some philosophical issues in modeling corrosion of oil and gas pipelines , 2013, International Journal of System Assurance Engineering and Management.

[16]  K. N. Fleming,et al.  Markov models for evaluating risk-informed in-service inspection strategies for nuclear power plant piping systems , 2004, Reliab. Eng. Syst. Saf..

[17]  Susan J. Kerber,et al.  Stainless steel : Surface analysis , 2000 .

[18]  Kenjiro Komai,et al.  Failure analysis and prevention in SCC and corrosion fatigue cases , 1998 .

[19]  Z. A. Majid,et al.  Experimental and computational failure analysis of natural gas pipe , 2012 .

[20]  Bengt O. Y. Lydell,et al.  Pipe failure probability - the Thomas paper revisited , 2000, Reliab. Eng. Syst. Saf..

[21]  H. M. Tawancy,et al.  Failure of weld joints between carbon steel pipe and 304 stainless steel elbows , 2005 .