A TOOLBOX FOR INPUT-OUTPUT SYSTEM INVERSION

Abstract In this paper a Matlab-based toolbox for the input-output system inversion of linear systems is presented. Different methods, based either on analytical or numerical approaches, are implemented. The toolbox can be exploited in the design of a feedforward action for control systems in different contexts in order to improve performances in the set-point regulation. The use of a pre-actuation and a post-actuation time can be easily analyzed as well as the role played by the choice of the desired output function.

[1]  Santosh Devasia,et al.  Optimal output-transitions for linear systems , 2003, Autom..

[2]  Qingze Zou,et al.  Preview-based inversion of nonlinear nonminimum-phase systems: VTOL example , 2004, 2004 43rd IEEE Conference on Decision and Control (CDC) (IEEE Cat. No.04CH37601).

[3]  Aurelio Piazzi,et al.  Using stable input-output inversion for minimum-time feedforward constrained regulation of scalar systems , 2005, Autom..

[4]  Karl Johan Åström,et al.  PULSE-STEP CONTROL , 2002 .

[5]  Christiaan Heij,et al.  Introduction to mathematical systems theory , 1997 .

[6]  A. Visioli,et al.  A noncausal approach for the improvement of PID control performances , 2004, Proceedings of the 2004 American Control Conference.

[7]  Aurelio Piazzi,et al.  Optimal noncausal set-point regulation of scalar systems , 2001, Autom..

[8]  Mouhacine Benosman,et al.  Stable inversion of SISO nonminimum phase linear systems through output planning: an experimental application to the one-link flexible manipulator , 2003, IEEE Trans. Control. Syst. Technol..

[9]  Aurelio Piazzi,et al.  A servo control system design using dynamic inversion , 2002 .

[10]  Aurelio Piazzi,et al.  STABLE DYNAMIC INVERSION OF NONMINIMUM-PHASE SCALAR LINEAR SYSTEMS , 2005 .

[11]  Qingze Zou,et al.  Preview-based optimal inversion for output tracking: application to scanning tunneling microscopy , 2002, Proceedings of the 41st IEEE Conference on Decision and Control, 2002..

[12]  Aurelio Piazzi,et al.  Minimum-time system-inversion-based motion planning for residual vibration reduction , 2000 .

[13]  Benjamin C. Kuo,et al.  AUTOMATIC CONTROL SYSTEMS , 1962, Universum:Technical sciences.

[14]  Santosh Devasia,et al.  Feedforward trajectory design for output transitions in discrete-time systems: disk-drive example , 2003, Proceedings of the 2003 American Control Conference, 2003..

[15]  Aurelio Piazzi,et al.  Improving Set-Point-Following Performance of Industrial Controllers with a Fast Dynamic Inversion Algorithm , 2003 .

[16]  Aurelio Piazzi,et al.  Optimal dynamic-inversion-based control of an overhead crane , 2002 .

[17]  Aurelio Piazzi,et al.  A noncausal approach for PID Control , 2006 .

[18]  Antonio Visioli.  A new design for a PID plus feedforward controller , 2004 .