DSP-base adaptive angular-velocity VKF order tracking for online real-time monitoring system

Mechanical systems under periodic loading due to rotary operation usually respond in measurements with a superposition of sinusoids whose frequencies were integer or fractional integer multiples of the reference shaft speed. When the rotary machines are running, acousto-mechanical signals acquired from the machines enable to reveal their operation status and machine conditions. The study proposed a DSP-based adaptive angular-velocity Vold-Kalman filtering order tracking (AV2KF_OT) algorithm with online real-time nature for signal interpretation and machine condition monitoring. Theoretical derivation and numerical implementation of the computation scheme was briefly introduced. An online real-time condition monitoring system based on the AV2KF_OT algorithm, which was implemented through both a digital signal processor (DSP) and a man-machine interface coded by using LabVIEW®, was developed. An experimental task, the startup detection on the fluid-induced whirl performed through a journal-bearing rotor rig, was used to justify the proposed technique.

[1]  Kesheng Wang,et al.  Application of computed order tracking, Vold–Kalman filtering and EMD in rotating machine vibration , 2011 .

[2]  Mingsian R. Bai,et al.  Adaptive Order Tracking Technique Using Recursive Least-Square Algorithm , 2002 .

[3]  Min-Chun Pan,et al.  Adaptive Vold Kalman filtering order tracking , 2007 .

[4]  Min-Chun Pan,et al.  Adaptive Angular-Velocity Vold-Kalman Order Tracking Used in Characterizing Dynamic Signals Measured From Rotary Machines , 2009 .

[5]  Jason R. Blough,et al.  Theoretical Foundations for High Performance Order Tracking with the Vold-Kalman Tracking Filter , 1997 .

[6]  Min-Chun Pan,et al.  Transmission noise identification using two-dimensional dynamic signal analysis , 2003 .

[7]  M.-Ch. Pan,et al.  Adaptive angular-velocity Vold–Kalman filter order tracking – Theoretical basis, numerical implementation and parameter investigation , 2016 .

[8]  Shie Qian.  Gabor Expansion for Order Tracking , 2003 .

[9]  Jian-Da Wu,et al.  An application of a recursive Kalman filtering algorithm in rotating machinery fault diagnosis , 2004 .

[10]  Min-Chun Pan,et al.  Improvement on Gabor order tracking and objective comparison with Vold–Kalman filtering order tracking , 2007 .

[11]  Shie Qian,et al.  A Comparison of the Newly Proposed Gabor Order Tracking Technique vs. Other Order Tracking Methods , 2001 .

[12]  S. Haykin,et al.  Adaptive Filter Theory , 1986 .

[13]  Y.-F. Lin,et al.  Further exploration of Vold–Kalman-filtering order tracking with shaft-speed information—I: Theoretical part, numerical implementation and parameter investigations , 2006 .

[14]  Min-Chun Pan,et al.  Investigation on improved Gabor order tracking technique and its applications , 2006 .

[15]  Y.-F. Lin,et al.  Further exploration of Vold–Kalman-filtering order tracking with shaft-speed information—II: Engineering applications , 2006 .

[16]  Gaël Chevallier,et al.  Tracking and removing modulated sinusoidal components: A solution based on the kurtosis and the Extended , 2013 .

[17]  J. Leuridan,et al.  High Resolution Order Tracking at Extreme Slew Rates Using Kalman Tracking Filters , 1993 .

[18]  Håvard Vold,et al.  Multi axle order tracking with the Vold-Kalman tracking filter , 1997 .

[19]  Charles T. Hatch,et al.  Fundamentals of Rotating Machinery Diagnostics , 2003 .

[20]  Kok Kiong Tan,et al.  Order-crossing removal in Gabor order tracking by independent component analysis , 2009 .

[21]  Kok Kiong Tan,et al.  High efficient crossing-order decoupling in Vold-Kalman filtering order tracking based on independent component analysis , 2010 .