Analytical and numerical parameter extraction for compact modeling of thermoelectric coolers

The 3D compact model of a thermoelectric cooler in the CFD approach is an essential technique for computationally realistic design of many industrial thermal management applications. The first objective of this paper is to develop a "black box"-like model for thermoelectric coolers as well as a method to formulate the effective material properties for the compact model based on the manufactures’ datasheets. Second, a highly detailed and physical thermoelectric cooler model is implemented to carry out virtual experiments when the cooler datasheet is not available. A number of close comparisons validate that the compact model and parameter extraction are accurate enough, and the computation time and size are significantly lower than the physical model. The compact model is also demonstrated to be helpful in evaluating the thermal system components such as an air-cooled heat sink, so that the system-level thermal management optimization is possible without complex, multi-scale computation.

[1]  S. Lineykin,et al.  User-friendly and intuitive graphical approach to the design of thermoelectric cooling systems , 2007 .

[2]  Søren Knudsen Kær,et al.  Thermal Management Optimization of a Thermoelectric-Integrated Methanol Evaporator Using a Compact CFD Modeling Approach , 2013, Journal of Electronic Materials.

[3]  E. E. Antonova,et al.  Finite elements for thermoelectric device analysis in ANSYS , 2005, ICT 2005. 24th International Conference on Thermoelectrics, 2005..

[4]  Yogendra Joshi,et al.  Multiscale Thermal Modeling Methodology for Thermoelectrically Cooled Electronic Cabinets , 2007 .

[5]  Ali Shakouri,et al.  Cost-efficiency trade-off and the design of thermoelectric power generators. , 2011, Environmental science & technology.

[7]  Paisarn Naphon,et al.  Liquid cooling in the mini-rectangular fin heat sink with and without thermoelectric for CPU☆ , 2009 .

[8]  A. Bar-Cohen,et al.  Thermoelectric-powered convective cooling of microprocessors , 2005, IEEE Transactions on Advanced Packaging.

[9]  Yu-Wei Chang,et al.  Thermoelectric water-cooling device applied to electronic equipment , 2010 .

[10]  Gang Chen,et al.  Supercooling of Peltier cooler using a current pulse , 2002 .

[11]  Gang Chen,et al.  Modeling of a new recuperative thermoelectric cycle for a tumble dryer , 2012 .

[12]  Y. Joshi,et al.  Application of Thermoelectric-Adsorption Cooler for Harsh Environment Electronics Under Varying Heat Load , 2010 .

[13]  G.L. Solbrekken,et al.  Comprehensive system-level optimization of thermoelectric devices for electronic cooling applications , 2008, IEEE Transactions on Components and Packaging Technologies.

[14]  Ioan Sauciuc,et al.  Thermal Devices Integrated With Thermoelectric Modules With Applications to CPU Cooling , 2005 .

[15]  G. Vineyard,et al.  Semiconductor Thermoelements and Thermoelectric Cooling , 1957 .

[16]  Juan Carlos Rodríguez,et al.  Thermal performance of a controlled cooling system for low-level optical signals , 2004 .

[17]  Eric Prather,et al.  Three-Dimensional Simulation of Thermoelectric Devices With Compact Numerical Models , 2003 .

[18]  Mohamed Zairi,et al.  Marlow Industries Inc. , 1994 .

[19]  Emanuela Colombo,et al.  Optimization of a new thermoelectric cooling assembly using CFD analysis and local modeling of thermoelectric effects , 2003, Proceedings ICT'03. 22nd International Conference on Thermoelectrics (IEEE Cat. No.03TH8726).

[20]  S. Ben-Yaakov,et al.  Modeling and Analysis of Thermoelectric Modules , 2005, IEEE Transactions on Industry Applications.

[21]  Gamal Refai-Ahmed,et al.  A Numerical Technique for Modeling Thermoelectric Cooler With Temperature Controller for Steady State CFD Applications , 2003 .

[22]  S. Kumar,et al.  Ultrathin Thermoelectric Devices for On-Chip Peltier Cooling , 2011, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[23]  L. Rosendahl,et al.  A three-dimensional numerical model of thermoelectric generators in fluid power systems , 2011 .

[24]  Ook Joong Kim,et al.  Analysis on the cooling performance of the thermoelectric micro-cooler , 2007 .

[25]  Achille Messac,et al.  Design of thermoelectric heat pump unit for active building envelope systems , 2005 .

[26]  F. L. Tan,et al.  Methodology on sizing and selecting thermoelectric cooler from different TEC manufacturers in cooling system design , 2008 .

[27]  R. E. Simons,et al.  An Assessment of Module Cooling Enhancement With Thermoelectric Coolers , 2003 .

[28]  J.K. Pedersen,et al.  Numerical Modeling of Thermoelectric Generators With Varing Material Properties in a Circuit Simulator , 2009, IEEE Transactions on Energy Conversion.

[30]  R. Taylor,et al.  Finite element analysis and material sensitivity of Peltier thermoelectric cells coolers , 2012 .

[31]  Chin-Hsiang Cheng,et al.  A three-dimensional theoretical model for predicting transient thermal behavior of thermoelectric coolers , 2010 .