Printability characterization of graphene-reinforced cementitious composites

The cement-based additive manufacturing, commonly known as 3D concrete printing, facilitates the use of advanced cementitious materials in construction as this construction technique minimizes waste and enables the optimal placement of the material. 3D printable cementitious mixtures should have specific consistency for successful manufacturing. In particular, they should be extruded smoothly during the printing process while maintain their shape after deposition, both of which are closely related to the rheological properties of cementitious mixture. The use of graphene in cementitious composites has been widely explored in recent years and it was shown that graphene can improve the mechanical properties and durability of cementitious composites. However, the rheological properties and printability characteristics of graphene-reinforced cementitious materials still remain underexplored. This study investigates the effects of graphene nanoplatelets (GNPs) on rheological and printability characteristics of GNP-reinforced cementitious composites. GNPs are added into cementitious mixtures, designed for 3D concrete printing applications, at concentration of 0%, 0.05%, 0.10%, 0.15%, 0.20%, and 0.25% by weight of cement. GNPs are first dispersed into water through the help of ultrasonic treatment and a polycarboxylate-based superplasticizer. The dispersion quality of GNPs is assessed through UV-vis absorption spectroscopy, optical microscopy, and Raman spectroscopy. Then, the rheological properties of GNP-reinforced mortar composites are studied using a shear rheometer via stress-growth tests, shear rate ramp up-down tests, and structural recovery tests.

[1]  Teng Tong,et al.  Investigation of the effects of graphene and graphene oxide nanoplatelets on the micro- and macro-properties of cementitious materials , 2016 .

[2]  M. Benmalek,et al.  Characterization of heat-treated self-compacting concrete containing mineral admixtures at early age and in the long term , 2014 .

[3]  O. Ozbulut,et al.  Tensile characterization of graphene nanoplatelets (GNP) mortar using acoustic emissions , 2020 .

[4]  Alshakim Nelson,et al.  Chemical modification and printability of shear-thinning hydrogel inks for direct-write 3D printing , 2018, Polymer.

[5]  M. Moeini,et al.  Effectiveness of the rheometric methods to evaluate the build-up of cementitious mortars used for 3D printing , 2020 .

[6]  Y. Arao,et al.  Efficient solvent systems for improving production of few-layer graphene in liquid phase exfoliation , 2017 .

[7]  Na Lu,et al.  The influence of water-to-cement ratio and superabsorbent polymers (SAPs) on solid-like behaviors of fresh cement pastes , 2021 .

[8]  Wang Baomin,et al.  Effect and mechanism of graphene nanoplatelets on hydration reaction, mechanical properties and microstructure of cement composites , 2019 .

[9]  Lawrence T. Drzal,et al.  A new compounding method for exfoliated graphite–polypropylene nanocomposites with enhanced flexural properties and lower percolation threshold , 2007 .

[10]  M. Dresselhaus,et al.  Studying disorder in graphite-based systems by Raman spectroscopy. , 2007, Physical chemistry chemical physics : PCCP.

[11]  Cairong Lu,et al.  Relationship between slump flow and rheological properties of self compacting concrete with silica fume and its permeability , 2015 .

[12]  K. Novoselov,et al.  The Worldwide Graphene Flake Production , 2018, Advanced materials.

[13]  Erik Schlangen,et al.  The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing , 2019, Materials.

[14]  B. Panda,et al.  Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing , 2020, Composites Part B: Engineering.

[15]  F. Miao,et al.  Ultraviolet Raman spectra of double-resonant modes of graphene , 2016 .

[16]  Riaan Combrinck,et al.  Measuring the thixotropy of conventional concrete: The influence of viscosity modifying agent, superplasticiser and water , 2019, Construction and Building Materials.

[17]  W. Boshoff,et al.  Rheo-viscoelastic behaviour of fresh cement-based materials: Cement paste, mortar and concrete , 2020 .

[18]  Mark R. Wiesner,et al.  Ultrasonic dispersion of nanoparticles for environmental, health and safety assessment – issues and recommendations , 2011, Nanotoxicology.

[19]  Zhenlin Wu,et al.  Investigation of the Mechanical Properties and Microstructure of Graphene Nanoplatelet-Cement Composite , 2016, Nanomaterials.

[20]  Malo Charrier,et al.  Testing Procedures on Materials to Formulate the Ink for 3D Printing , 2020 .

[21]  C. N. Lau,et al.  Superior thermal conductivity of single-layer graphene. , 2008, Nano letters.

[22]  M. Sonebi,et al.  Fresh and rheological properties of 3D printing bio-cement-based materials , 2017 .

[23]  J. Sanjayan,et al.  Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing , 2020 .

[24]  S. Kawashima,et al.  The role of limestone and calcined clay on the rheological properties of LC3 , 2020 .

[25]  Jacques Kruger,et al.  3D concrete printing: A lower bound analytical model for buildability performance quantification , 2019, Automation in Construction.

[26]  Xin Cheng,et al.  Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials , 2018, Construction and Building Materials.

[27]  Sardar Kashif Ur Rehman,et al.  Influence of Graphene Nanosheets on Rheology, Microstructure, Strength Development and Self-Sensing Properties of Cement Based Composites , 2018 .

[28]  Mustafa Şahmaran,et al.  Effect of mixing methods on the electrical properties of cementitious composites incorporating different carbon-based materials , 2016 .

[29]  Jian Wang,et al.  Effect of fly ash on rheological properties of graphene oxide cement paste , 2017 .

[30]  Nicolas Roussel,et al.  Rheological requirements for printable concretes , 2018, Cement and Concrete Research.

[31]  D. Harris,et al.  Graphene Nanoplatelets-Based Self-Sensing Cementitious Composites , 2016 .

[32]  A. Perrot,et al.  Effect of mix proportions on rheology and permeability of cement grouts containing viscosity modifying admixture , 2019, Construction and Building Materials.

[33]  Hongjian Du,et al.  Enhancement of barrier properties of cement mortar with graphene nanoplatelet , 2015 .

[34]  Bo Pang,et al.  Fresh properties of a novel 3D printing concrete ink , 2018, Construction and Building Materials.

[35]  Sze Dai Pang,et al.  Improvement in concrete resistance against water and chloride ingress by adding graphene nanoplatelet , 2016 .

[36]  T. Tong,et al.  Experimental investigation on mechanical and piezoresistive properties of cementitious materials containing graphene and graphene oxide nanoplatelets , 2016 .

[37]  Yiwei Weng,et al.  Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing , 2019, Construction and Building Materials.

[38]  K. Khayat,et al.  Effect of Graphite Nanoplatelets and Carbon Nanofibers on Rheology, Hydration, Shrinkage, Mechanical Properties, and Microstructure of UHPC , 2018 .

[39]  B. Panda,et al.  Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing , 2019, Composites Part B: Engineering.

[40]  Q. Yuan,et al.  Effect of water absorption of SAP on the rheological properties of cement-based materials with ultra-low w/b ratio , 2019, Construction and Building Materials.