Limit Analysis and Stability Charts for 3D Slope Failures

The kinematic approach of limit analysis is explored in three-dimensional (3D) stability analysis of slopes. A formal derivation is first shown indicating that, in a general case, the approach yields an upper bound to the critical height of the slope or an upper bound on the safety factor. A 3D failure mechanism is used to produce stability charts for slopes. The slope safety factor can be read from the charts without the need for iterations. While two-dimensional (2D) analyses of uniform slopes lead to lower safety factors than 3D analyses do, a 3D calculation is justified in cases where the width of the collapse mechanism has physical limitations, for instance, in the case of excavation slopes, or when the analysis is carried out to back-calculate the properties of the soil from 3D failure case histories. Also, a 3D failure can be triggered by a load on a portion of the surface area of the slope. Calculations indicate that for the 3D safety factor of the loaded slope to become lower than the 2D factor f...

[1]  P. de Buhan,et al.  THREE DIMENSIONAL BEARING CAPACITY ANALYSIS OF A FOUNDATION NEAR A SLOPE , 1998 .

[2]  J. M. Duncan.  State of the Art: Limit Equilibrium and Finite-Element Analysis of Slopes , 1996 .

[3]  D. H. Cornforth,et al.  Landslides in Practice: Investigation, Analysis, and Remedial/Preventative Options in Soils , 2005 .

[4]  Dov Leshchinsky,et al.  THREE-DIMENSIONAL SLOPE STABILITY : END EFFECTS , 1986 .

[5]  Radoslaw L. Michalowski,et al.  Three-Dimensional Stability of Slopes and Excavations , 2009 .

[6]  A. Drescher,et al.  Limit Plasticity Approach to Piping in Bins , 1983 .

[7]  S. Cavounidis,et al.  On the ratio of factors of safety in slope stability analyses , 1987 .

[8]  D. V. Griffiths,et al.  Three-dimensional slope stability analysis by elasto-plastic finite elements , 2007 .

[9]  Radoslaw L. Michalowski,et al.  Upper-bound load estimates on square and rectangular footings , 2001 .

[10]  J. M. Bell,et al.  DIMENSIONLESS PARAMETERS FOR HOMOGENEOUS EARTH SLOPES , 1966 .

[11]  Wai-Fah Chen.  Limit Analysis and Soil Plasticity , 1975 .

[12]  Radoslaw L. Michalowski,et al.  THREE-DIMENSIONAL ANALYSIS OF LOCALLY LOADED SLOPES , 1989 .

[13]  D. C. Drucker,et al.  Soil mechanics and plastic analysis or limit design , 1952 .

[14]  H. J. Greenberg,et al.  EXTENDED LIMIT DESIGN THEOREMS FOR CONTINUOUS MEDIA , 1952 .

[15]  Radoslaw L. Michalowski,et al.  Stability Charts for Uniform Slopes , 2002 .

[16]  H. Fang,et al.  Stability of Earth Slopes , 1991 .

[17]  Antonio Gens,et al.  Three-dimensional analysis of slides in cohesive soils , 1988 .

[18]  Jean Salençon,et al.  Introduction to the yield design theory and its applications to soil mechanics , 1990 .

[19]  Mohsen M. Baligh,et al.  End Effects on Stability of Cohesive Slopes , 1975 .