Mechanisms of reduced implant stability in osteoporotic bone

[1]  R. Müller,et al.  Computational analyses of small endosseous implants in osteoporotic bone. , 2010, European cells & materials.

[2]  A. J. Wirth,et al.  Mechanical competence of bone-implant systems can accurately be determined by image-based micro-finite element analyses , 2010 .

[3]  Richard Weinkamer,et al.  Effect of minimal defects in periodic cellular solids , 2010 .

[4]  P. Fratzl,et al.  Improving the osteointegration and bone-implant interface by incorporation of bioactive particles in sol-gel coatings of stainless steel implants. , 2010, Acta biomaterialia.

[5]  Y. Bunai,et al.  Age- and gender-dependent changes in three-dimensional microstructure of cortical and trabecular bone at the human femoral neck , 2010, Osteoporosis International.

[6]  R. Müller,et al.  Endosseous implant anchorage is critically dependent on mechanostructural determinants of peri‐implant bone trabeculae , 2010, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[7]  Paul Sajda,et al.  Micromechanical analyses of vertebral trabecular bone based on individual trabeculae segmentation of plates and rods. , 2009, Journal of biomechanics.

[8]  Jui-Ting Hsu,et al.  Bone stress and interfacial sliding analysis of implant designs on an immediately loaded maxillary implant: a non-linear finite element study. , 2008, Journal of dentistry.

[9]  Arturo N Natali,et al.  Investigation of bone inelastic response in interaction phenomena with dental implants. , 2008, Dental materials : official publication of the Academy of Dental Materials.

[10]  D. Scharnweber,et al.  Effect of biological implant surface coatings on bone formation, applying collagen, proteoglycans, glycosaminoglycans and growth factors , 2008, Journal of materials science. Materials in medicine.

[11]  P. Tengvall,et al.  Stainless steel screws coated with bisphosphonates gave stronger fixation and more surrounding bone. Histomorphometry in rats. , 2008, Bone.

[12]  D. Shafer,et al.  A review of the association between osteoporosis and alveolar ridge augmentation. , 2007, Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.

[13]  D. Scharnweber,et al.  Influence of extracellular matrix coatings on implant stability and osseointegration: an animal study. , 2007, Journal of biomedical materials research. Part B, Applied biomaterials.

[14]  X Edward Guo,et al.  Contributions of trabecular rods of various orientations in determining the elastic properties of human vertebral trabecular bone. , 2007, Bone.

[15]  M. H. Luxner,et al.  Numerical simulations of 3D open cell structures - influence of structural irregularities on elasto-plasticity and deformation localization , 2007 .

[16]  G H van Lenthe,et al.  Specimen-specific beam models for fast and accurate prediction of human trabecular bone mechanical properties. , 2006, Bone.

[17]  B. Snyder,et al.  The interaction of microstructure and volume fraction in predicting failure in cancellous bone. , 2006, Bone.

[18]  Qing Hang Zhang,et al.  Effects of bone materials on the screw pull-out strength in human spine. , 2006, Medical engineering & physics.

[19]  R. Müller,et al.  Parathyroid hormone 1-34 enhances titanium implant anchorage in low-density trabecular bone: a correlative micro-computed tomographic and biomechanical analysis. , 2006, Bone.

[20]  J. Goldhahn,et al.  Osseointegration of hollow cylinder based spinal implants in normal and osteoporotic vertebrae: a sheep study , 2006, Archives of Orthopaedic and Trauma Surgery.

[21]  R. Müller,et al.  The influence of surface coatings of dicalcium phosphate (DCPD) and growth and differentiation factor-5 (GDF-5) on the stability of titanium implants in vivo. , 2006, Biomaterials.

[22]  Ralph Müller,et al.  Importance of Individual Rods and Plates in the Assessment of Bone Quality and Their Contribution to Bone Stiffness , 2006, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[23]  Arturo N Natali,et al.  Analysis of bone-implant interaction phenomena by using a numerical approach. , 2006, Clinical oral implants research.

[24]  Felix Beckmann,et al.  Osteoconductive modifications of Ti-implants in a goat defect model: characterization of bone growth with SR muCT and histology. , 2005, Biomaterials.

[25]  L. Gibson.  Biomechanics of cellular solids. , 2005, Journal of biomechanics.

[26]  S. Chou,et al.  Investigation of fixation screw pull-out strength on human spine. , 2004, Journal of biomechanics.

[27]  U C Belser,et al.  Stimulating effect of implant loading on surrounding bone. Comparison of three numerical models and validation by in vivo data. , 2004, Clinical oral implants research.

[28]  Taiji Adachi,et al.  Effects of a Fixation Screw on Trabecular Structural Changes in a Vertebral Body Predicted by Remodeling Simulation , 2003, Annals of Biomedical Engineering.

[29]  X. Guo,et al.  Mechanical consequence of trabecular bone loss and its treatment: a three-dimensional model simulation. , 2002, Bone.

[30]  Lorna J. Gibson,et al.  The influence of cracks, notches and holes on the tensile strength of cellular solids , 2001 .

[31]  S Vajjhala,et al.  A cellular solid model for modulus reduction due to resorption of trabeculae in bone. , 2000, Journal of biomechanical engineering.

[32]  D. Puleo,et al.  Understanding and controlling the bone-implant interface. , 1999, Biomaterials.

[33]  Yuehuei H. An,et al.  Mechanical testing of bone and the bone-implant interface , 1999 .

[34]  T M Keaveny,et al.  Biomechanical effects of intraspecimen variations in trabecular architecture: a three-dimensional finite element study. , 1999, Bone.

[35]  S. Szmukler‐Moncler,et al.  Timing of loading and effect of micromotion on bone-dental implant interface: review of experimental literature. , 1998, Journal of biomedical materials research.

[36]  W H Harris,et al.  Factors influencing stability at the interface between a porous surface and cancellous bone: a finite element analysis of a canine in vivo micromotion experiment. , 1997, Journal of biomedical materials research.

[37]  Lorna J. Gibson,et al.  The effects of non-periodic microstructure and defects on the compressive strength of two-dimensional cellular solids , 1997 .

[38]  M. Nagumo,et al.  Osseointegration of dental implants in rabbit bone with low mineral density. , 1997, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[39]  M. Sabbaghian,et al.  Load Distribution Between Threads in Threaded Connections , 1997 .

[40]  R M Harrington,et al.  Factors affecting the pullout strength of cancellous bone screws. , 1996, Journal of biomechanical engineering.

[41]  C. Bünger,et al.  Tissue ingrowth into titanium and hydroxyapatite‐coated implants during stable and unstable mechanical conditions , 1992, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[42]  I. Hvid,et al.  Fixation of titanium and hydroxyapatite-coated implants in arthritic osteopenic bone. , 1991, The Journal of arthroplasty.

[43]  M. Wolcott.  Cellular solids: Structure and properties , 1990 .

[44]  S. Cummings,et al.  Lifetime risks of hip, Colles', or vertebral fracture and coronary heart disease among white postmenopausal women. , 1989, Archives of internal medicine.

[45]  H. Jones.  The status of rapid solidification of alloys in research and application , 1984 .

[46]  N. Takano,et al.  Biomechanical role of peri-implant cancellous bone architecture. , 2010, The International journal of prosthodontics.

[47]  M. H. Luxner,et al.  A finite element study on the effects of disorder in cellular structures. , 2009, Acta biomaterialia.

[48]  M. Viceconti,et al.  On the mechanical stability of porous coated press fit titanium implants: a finite element study of a pushout test. , 2008, Journal of biomechanics.

[49]  R Huiskes,et al.  Indirect determination of trabecular bone effective tissue failure properties using micro-finite element simulations. , 2008, Journal of biomechanics.

[50]  R. Müller,et al.  Local delivery of bisphosphonate from coated orthopedic implants increases implants mechanical stability in osteoporotic rats. , 2006, Journal of biomedical materials research. Part A.

[51]  R. Müller,et al.  Age-related changes in trabecular bone microstructures: global and local morphometry , 2005, Osteoporosis International.

[52]  R. Müller,et al.  Time-lapsed microstructural imaging of bone failure behavior. , 2004, Journal of biomechanics.

[53]  David H. Kohn,et al.  Effective anisotropic elastic constants of bimaterial interphases: comparison between experimental and analytical techniques , 1996 .

[54]  L. Mosekilde,et al.  A model of vertebral trabecular bone architecture and its mechanical properties. , 1990, Bone.

[55]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .