Friction in metal machining—Mechanical aspects

[1]  J. A. Bailey,et al.  Correlation of Flow Stress With Strain Rate and Temperature During Machining , 1973 .

[2]  C. Rubenstein,et al.  The influence of flank wear, cutting speed and cutting fluid on the surface and sub-surface workhardening produced in an orthogonal planing operation , 1972 .

[3]  S. Kato,et al.  Stress Distribution at the Interface Between Tool and Chip in Machining , 1972 .

[4]  S. Ramalingam.  A Photoelastic Study of Stress Distribution During Orthogonal Cutting—Part 2: Photoplasticity Observations , 1971 .

[5]  T. Childs,et al.  A new visio-plasticity technique and a study of curly chip formation , 1971 .

[6]  G. Boothroyd,et al.  Advances in machine tool design and research: S. A. Tobias and F. Koenigsberger: Proceedings of the 9th International M.T.D.R. Conference, University Birmingham, September (1968). 1324 pages. Pergamon Press, Oxford, 1969 , 1970 .

[7]  J. Williams,et al.  The effect of temperature on the softening characteristics of duralumin and low-carbon steel, work, chip and built-up-edge materials as formed in the machining process , 1970 .

[8]  K. Nakajima,et al.  Formation of a built-up edge during cutting , 1968 .

[9]  K. Nakajima,et al.  Structural change of a metal surface during the break-in period , 1968 .

[10]  G. Boothroyd,et al.  Critical Review of Some Previous Work on the Mechanics of the Metal-Cutting Process , 1968 .

[11]  G. W. Rowe,et al.  A New Approach to Determination of the Shear-Plane Angle in Machining , 1967 .

[12]  Hidehiko Takeyama,et al.  Basic Investigation of Built-Up-Edge , 1967 .

[13]  A. Isogai,et al.  Electron microprobe study of the effect of abrasion of the surface of alloy crystals , 1967 .

[14]  T. C. Hsu,et al.  A Study of the Normal and Shear Stresses on a Cutting Tool , 1966 .

[15]  H. Chandrasekaran,et al.  Photoelastic Analysis of Tool-Chip Interface Stresses , 1965 .

[16]  G. Boothroyd,et al.  Lubricating Action of Cutting Fluids , 1965 .

[17]  P. W. Wallace,et al.  Tool Forces and Tool-Chip Friction in Orthogonal Machining: , 1964 .

[18]  D. V. Keller,et al.  Adhesion between solid metals , 1963 .

[19]  M. Sikorski.  Correlation of the Coefficient of Adhesion With Various Physical and Mechanical Properties of Metals , 1963 .

[20]  G. L. Thuering,et al.  Machinability of Nodular Cast Irons: Part II—Effect of Cutting Conditions on Flank Adhesion , 1962 .

[21]  E. G. Thomsen,et al.  Flank Friction Studies With Carbide Tools Reveal Sublayer Plastic Flow , 1962 .

[22]  K. Hitomi,et al.  An Analysis of the Mechanism of Orthogonal Cutting and Its Application to Discontinuous Chip Formation , 1961 .

[23]  P.L.B. Oxley,et al.  A strain-hardening solution for the “shear angle” in orthogonal metal cutting , 1961 .

[24]  G. L. Thuering,et al.  Machinability of Nodular Cast Irons: Part I—Tool Forces and Flank Adhesion , 1961 .

[25]  E. Usui,et al.  A Photoelastic Analysis of Machining Stresses , 1960 .

[26]  P. Albrecht,et al.  New Developments in the Theory of the Metal-Cutting Process: Part I. The Ploughing Process in Metal Cutting , 1960 .

[27]  E. G. Thomsen,et al.  A Critical Comparison of Metal-Cutting Theories With New Experimental Data , 1960 .

[28]  E. G. Thomsen,et al.  The Role of Friction in Metal Cutting , 1960 .

[29]  正已 益子,et al.  金属切削に関する基礎的研究(第2報) : 刃先にかかる押込力の理論式とその実験的考察 , 1956 .

[30]  正巳 益子.  金属切削に関する基礎的研究(第1報) : 新しい考察による切削力の解析 , 1953 .

[31]  M. E. Merchant.  Mechanics of the Metal Cutting Process. II. Plasticity Conditions in Orthogonal Cutting , 1945 .

[32]  T. Childs,et al.  Metal cutting: Mechanics, surface physics and metallurgy , 1972 .

[33]  E. Armarego,et al.  The Machining of Metals , 1969 .

[34]  E. Usui,et al.  Examination of Grid Line Deformation and Permissible Range of Solution , 1967 .

[35]  E. Rabinowicz,et al.  Friction and Wear of Materials , 1966 .

[36]  N. Zorev.  Metal cutting mechanics , 1966 .

[37]  Hideaki Kudo,et al.  Some new slip-line solutions for two-dimensional steady-state machining , 1965 .

[38]  G. Boothroyd,et al.  Fundamentals of metal machining , 1965 .

[39]  D. Buckley,et al.  Influence of Crystal Structure on Friction Characteristics of Rare-Earth and Related Metals in Vacuum to 10-10 Millimeter of Mercury , 1965 .

[40]  F. P. Bowden,et al.  The Friction and Lubrication of Solids , 1964 .

[41]  D. Buckley,et al.  Friction, Wear, and Evaporation Rates of Various Materials in Vacuum to 10(exp -7) mm Hg , 1962 .