Potential of cold gas dynamic spray as additive manufacturing technology

In this paper, the application of cold spray (CS) coating deposition technology as additive manufacturing technique is discussed. Absence of material melting during CS deposition permits to obtain deposits with low value of residual stresses and to preserve the phase composition of source material which is a very important advantage. In this paper, the latest developments in the field of cold spray such as micronozzle device and new multimaterial deposition approach permitting to significantly enlarge the potential of cold spray as additive manufacturing technology is discussed.

[1]  Renzhong Huang,et al.  In-flight particle velocity measurements with DPV-2000 in cold spray , 2006 .

[2]  R. Maev,et al.  Air gas dynamic spraying of powder mixtures: Theory and application , 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.

[3]  P. Fox,et al.  Experimental study of titanium/aluminium deposits produced by cold gas dynamic spray , 2006 .

[4]  H. Koivuluoto,et al.  Effect of Ceramic Particles on Properties of Cold-Sprayed Ni-20Cr+Al2O3 Coatings , 2009 .

[5]  Martin Rein,et al.  Cold spray deposition: Significance of particle impact phenomena , 2005 .

[6]  Ji-shan Zhang,et al.  Deposition Behavior and Characteristics of Cold-Sprayed Cu-Cr Composite Deposits , 2012, Journal of Thermal Spray Technology.

[7]  M. F. Smith,et al.  Gas dynamic principles of cold spray , 1998 .

[8]  V. Kosarev,et al.  Influence of Flow Swirling and Exit Shape of Barrel Nozzle on Cold Spraying , 2011 .

[9]  H. Singh,et al.  High Temperature Corrosion Behavior of Cold Spray Ni-20Cr Coating on Boiler Steel in Molten Salt Environment at 900 °C , 2009, International Thermal Spray Conference.

[10]  A. Sova,et al.  Velocity of the Particles Accelerated by a Cold Spray Micronozzle: Experimental Measurements and Numerical Simulation , 2013, Journal of Thermal Spray Technology.

[11]  Chee Kai Chua,et al.  Rapid prototyping and tooling techniques: a review of applications for rapid investment casting , 2005 .

[12]  Changhee Lee,et al.  Superhard nano WC–12%Co coating by cold spray deposition , 2005 .

[13]  Mingxing Zhang,et al.  Optimisation of stainless steel cold spray coatings using mixed particle size distributions , 2011 .

[14]  J. Legoux,et al.  Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings , 2010, International Thermal Spray Conference.

[15]  H. Koivuluoto,et al.  Microstructural Studies of Cold Sprayed Copper, Nickel, and Nickel-30% Copper Coatings , 2007 .

[16]  Roman Gr. Maev,et al.  Comprar Introduction to Low Pressure Gas Dynamic Spray: Physics & Technology | Roman Gr. Maev | 9783527406593 | Wiley , 2007 .

[17]  Mingxing Zhang,et al.  Residual stress and thermo-mechanical properties of cold spray metal coatings , 2011 .

[18]  A. Kashirin,et al.  Metal particle deposition stimulation by surface abrasive treatment in gas dynamic spraying , 2006 .

[19]  T. Laha,et al.  Effect of carrier gases on microstructural and electrochemical behavior of cold-sprayed 1100 aluminum coating , 2005 .

[20]  E. Boller,et al.  Damage Study of Cold-Sprayed Composite Materials for Application to Electrical Contacts , 2012, Journal of thermal spray technology (Print).

[21]  J. Schoenung,et al.  Synthesis and mechanical properties of nanocrystalline Ni coatings produced by cold gas dynamic spraying , 2006 .

[22]  V. F. Kosarev,et al.  On some aspects of gas dynamics of the cold spray process , 2003 .

[23]  H. Richter,et al.  An analysis of the cold spray process and its coatings , 2002 .

[24]  A. Sova,et al.  Preliminary study on deposition of aluminium and copper powders by cold spray micronozzle using helium , 2013 .

[25]  Mingxing Zhang,et al.  Residual stresses in cold spray Al coatings: The effect of alloying and of process parameters , 2012 .

[26]  Changhee Lee,et al.  Fabrication of WC–Co coatings by cold spray deposition , 2005 .

[27]  Sung-hoon Ahn,et al.  Repair of Damaged Mold Surface by Cold-Spray Method☆ , 2007 .

[28]  R. Dykhuizen,et al.  Particle velocity and deposition efficiency in the cold spray process , 1999 .

[29]  J. Schoenung,et al.  Cold spray deposition of nanocrystalline aluminum alloys , 2005 .

[30]  Pedro M. Hernandez,et al.  A technical note on the characterization of electroformed nickel shells for their application to injection molds , 2006 .

[31]  H. Richter,et al.  On Parameter Selection in Cold Spraying , 2011 .

[32]  A. Sova,et al.  Development of multimaterial coatings by cold spray and gas detonation spraying , 2010 .

[33]  R. Mongrain,et al.  Improving the strength and corrosion resistance of 316L stainless steel for biomedical applications using cold spray , 2013 .

[34]  William O’Neill,et al.  Cold gas dynamic manufacturing: A non-thermal approach to freeform fabrication , 2007 .

[35]  M. Guagliano,et al.  Influence of Pre-Heated Al 6061 Substrate Temperature on the Residual Stresses of Multipass Al Coatings Deposited by Cold Spray , 2011 .

[36]  Andrey V. Gusarov,et al.  Single track formation in selective laser melting of metal powders , 2010 .

[37]  E. Lavernia,et al.  Cold gas dynamic spraying of iron-base amorphous alloy , 2006 .

[38]  V. F. Kosarev,et al.  The features of cold spray nozzle design , 2001 .

[39]  Ljubomir Tanchev.  Virtual and Rapid Manufacturing : Advanced Research in Virtual and Rapid Prototyping , 2007 .

[40]  Eric Irissou,et al.  Effect of Substrate Temperature on the Formation Mechanism of Cold-Sprayed Aluminum, Zinc and Tin Coatings , 2007, International Thermal Spray Conference.

[41]  H. Liao,et al.  Optimal design of a cold spray nozzle by numerical analysis of particle velocity and experimental validation with 316L stainless steel powder , 2007 .

[42]  Guanjun Yang,et al.  Cold spraying of Fe/Al powder mixture: Coating characteristics and influence of heat treatment on the phase structure , 2008 .

[43]  A. Sova,et al.  Deposition of multicomponent coatings by Cold Spray , 2008 .

[44]  M. Brochu,et al.  Cold gas dynamic spraying as a method for freeforming and joining materials , 2008 .

[45]  Duc Truong Pham,et al.  A comparison of rapid prototyping technologies , 1998 .

[46]  H. Koivuluoto,et al.  Effect of Powder Type and Composition on Structure and Mechanical Properties of Cu + Al2O3 Coatings Prepared by using Low-Pressure Cold Spray Process , 2010 .

[47]  I. Yadroitsev,et al.  Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder , 2007 .

[48]  C. Moreau,et al.  Investigation of Al-Al2O3 Cold Spray Coating Formation and Properties , 2007, International Thermal Spray Conference.

[49]  Heli Koivuluoto,et al.  Corrosion Properties of Cold-Sprayed Tantalum Coatings , 2009 .

[50]  T. Hussain,et al.  Cold Spraying of Titanium: A Review of Bonding Mechanisms, Microstructure and Properties , 2012 .

[51]  N. Birbilis,et al.  Interfacial structure between particles in an aluminum deposit produced by cold spray , 2011 .

[52]  A. Sova,et al.  Effect of Ceramic Particle Velocity on Cold Spray Deposition of Metal-Ceramic Coatings , 2011 .

[53]  R. Teets,et al.  Aluminum coatings via kinetic spray with relatively large powder particles , 2002 .

[54]  M. Tiryakioğlu,et al.  On the characterization of bulk copper produced by cold gas dynamic spray processing in as fabricated and annealed conditions , 2011 .

[55]  T. Grund,et al.  New method for producing power electronic circuit boards by cold-gas spraying and investigation of adhesion mechanisms , 2010 .

[56]  H. Liao,et al.  Investigation of Deposition Behavior of Cold-Sprayed Magnesium Coating , 2012, Journal of Thermal Spray Technology.

[57]  Thomas Klassen,et al.  From Particle Acceleration to Impact and Bonding in Cold Spraying , 2009 .

[58]  Anatolii Papyrin,et al.  Cold Spray Technology , 2006 .