Out-of-plane platforms with bi-directional thermal bimorph actuation for transducer applications

This paper reports on the Buckled Cantilever Platform (BCP) that allows the manipulation of the out of plane structures through the adjustment of the pitch angle using thermal bimorph micro-actuators. Due to the micro-fabrication process used, the bimorph actuators can be designed to move in both: Counter Clockwise (CCW) and Clockwise (CW) directions with a resolution of up to 110 μm/V, with smallest step in the range of nanometers. Thermal and electrical characterization of the thermal bimorph actuators showed low influence in the platforms temperature and low power consumption (<; 35μW) mainly due to the natural isolation of the structure. Tip displacements larger than 500μm were achieved. The precise angle adjustment achieved through these mechanisms makes them optimal for a range of different MEMS applications, like optical benches and low frequency sweeping sensors and antennas.

[1]  Mohammad I. Younis,et al.  An Experimental and Theoretical Investigation of a Micromirror Under Mixed-Frequency Excitation , 2015, Journal of Microelectromechanical Systems.

[2]  Sahil Oak,et al.  Rotating Out-of-Plane Micromirror , 2010, Journal of Microelectromechanical Systems.

[3]  D. Castro,et al.  Development of untethered SU-8 polymer scratch drive microrobots , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[4]  David Conchouso,et al.  Platform Isolation Using Out-of-Plane Complaint Mechanisms , 2014 .

[5]  Armando Arpys Arevalo Carreno,et al.  UHeater on a Buckled Cantilever Plate for Gas Sensor Applications , 2012 .

[6]  Mohammad I. Younis,et al.  Towards a digital sound reconstruction MEMS device: Characterization of a single PZT based piezoelectric actuator , 2015, 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[7]  WU MINGC..  Micromachining for Optical and Optoelectronic Systems , 1998 .

[8]  A. Leung,et al.  Buckled cantilevers for out-of-plane platforms , 2008 .

[9]  David Conchouso,et al.  A versatile multi-user polyimide surface micromachinning process for MEMS applications , 2015, 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[10]  M. Parameswaran,et al.  Automated assembly of hingeless 90° out-of-plane microstructures , 2007 .

[11]  A.M. Leung,et al.  Three-axis thermal accelerometer based on buckled cantilever microstructure , 2008, 2008 IEEE Sensors.

[12]  Jürgen Kosel,et al.  Simulation of a Low Frequency Z-Axis SU-8 Accelerometer in CoventorWare and MEMS+ , 2013, 2013 UKSim 15th International Conference on Computer Modelling and Simulation.

[13]  Atif Shamim,et al.  New Movable Plate for Efficient Millimeter Wave Vertical on-Chip Antenna , 2013, IEEE Transactions on Antennas and Propagation.

[14]  Tim Dallas,et al.  Rotating Out-of-Plane Micromirror , 2010 .

[15]  M. Parameswaran,et al.  Assembly and Characterization of Buckled Cantilever Platforms for Thermal Isolation in a Polymer Micromachining Process , 2007, 2007 Canadian Conference on Electrical and Computer Engineering.

[16]  Jürgen Kosel,et al.  Simulation of SU-8 Frequency-Driven Scratch Drive Actuators , 2013, 2013 UKSim 15th International Conference on Computer Modelling and Simulation.

[17]  Gregory T. A. Kovacs,et al.  Ciliary microactuator array for scanning electron microscope positioning stage , 1998 .

[18]  Muhammad Mustafa Hussain,et al.  Design and characterization of ultra-stretchable monolithic silicon fabric , 2014 .

[19]  Arpys Arevalo,et al.  Low-cost silicon wafer dicing using a craft cutter , 2015 .

[20]  Dan Sameoto,et al.  Out-of-plane electrothermal actuators in silicon-on-insulator technology , 2006, Canadian Journal of Electrical and Computer Engineering.

[21]  Jurgen Kosel,et al.  Three-Axis Magnetic Field Induction Sensor Realized on Buckled Cantilever Plate , 2013, IEEE Transactions on Magnetics.

[22]  Nikolai Dechev,et al.  Simulation of a Micro-Scale Out-of-plane Compliant Mechanism , 2014 .

[23]  Ian G. Foulds,et al.  Characterization of Kink Actuators as Compared to Traditional Chevron Shaped Bent-Beam Electrothermal Actuators , 2012, Micromachines.

[24]  Hiroyuki Fujita,et al.  Fabrication and operation of polyimide bimorph actuators for a ciliary motion system , 1993 .

[25]  A. Arevalo,et al.  Simulation of a Polyimide Based Micromirror , 2014 .

[26]  Arpys Arevalo,et al.  Parametric Study of Polyimide – Lead Zirconate Titanate Thin Film Cantilivers for Transducer Applications , 2013 .