Design and validation of a testing system to assess torsional cancellous bone failure in conjunction with time-lapsed micro-computed tomographic imaging.

When compressed axially, cancellous bone often fails at an oblique angle along well-defined bands, highlighting the importance of cancellous bone shear properties. Torsion testing to determine shear properties of cancellous bone has often been conducted under conditions appropriate only for axis-symmetric specimens comprised of homogeneous and isotropic materials. However, most cancellous bone specimens do not meet these stringent test conditions. Therefore, the aim of this study was to design and validate a uniaxial, incremental torsional testing system for non-homogeneous orthotropic or non-axis-symmetric specimens. Precision and accuracy of the newly designed torsion system was validated by using Plexiglas rods and beams, where obtained material properties were compared to those supplied by the manufacturer. Additionally, the incremental step-wise application of angular displacement and simultaneous time-lapsed microCT imaging capability of the system was validated using whale cancellous bone specimens, with step-wise application of angular displacement yielding similar torsional mechanical properties to continuous application of angular displacement in a conventional torsion study. In conclusion, a novel torsion testing system for non-homogeneous, orthotropic materials using the incremental step-wise application of torsion and simultaneous time-lapsed microCT imaging was designed and validated.

[1]  P Rüegsegger,et al.  The quality of trabecular bone evaluated with micro-computed tomography, FEA and mechanical testing. , 1997, Studies in health technology and informatics.

[2]  Leonard R. Herrmann,et al.  Elastic Torsional Analysis of Irregular Shapes , 1965 .

[3]  L. Claes,et al.  Predictive value of Singh index and bone mineral density measured by quantitative computed tomography in determining the local cancellous bone quality of the proximal femur. , 2001, Clinical biomechanics.

[4]  Steven D. Kugelmass,et al.  Relationship between NMR transverse relaxation, trabecular bone architecture, and strength. , 1993, Proceedings of the National Academy of Sciences of the United States of America.

[5]  R. Müller,et al.  Time-lapsed microstructural imaging of bone failure behavior. , 2004, Journal of biomechanics.

[6]  Matthew J. Silva,et al.  Growing C57Bl/6 Mice Increase Whole Bone Mechanical Properties by Increasing Geometric and Material Properties , 1999, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[7]  S. Cowin.  Bone mechanics handbook , 2001 .

[8]  P. Rüegsegger,et al.  A microtomographic system for the nondestructive evaluation of bone architecture , 2006, Calcified Tissue International.

[9]  M. J. Silva,et al.  In vitro sodium fluoride exposure decreases torsional and bending strength and increases ductility of mouse femora. , 2000, Journal of biomechanics.

[10]  A. Burstein,et al.  The biomechanics of torsional fractures: the effect of loading on ultimate properties. , 1971, Journal of biomechanics.

[11]  W. Hayes,et al.  Multiaxial strength characteristics of trabecular bone. , 1983, Journal of biomechanics.

[12]  M. Kleerekoper,et al.  Dissociation between the effects of endogenous parathyroid hormone on adenosine 3',5'-monophosphate generation and phosphate reabsorption in hypocalcemia due to vitamin D depletion: an acquired disorder resembling pseudohypoparathyroidism type II. , 1985, The Journal of clinical endocrinology and metabolism.

[13]  C H Turner,et al.  Basic biomechanical measurements of bone: a tutorial. , 1993, Bone.

[14]  J S Thomsen,et al.  Relationships between static histomorphometry and bone strength measurements in human iliac crest bone biopsies. , 1998, Bone.

[15]  D Mitton,et al.  The effects of density and test conditions on measured compression and shear strength of cancellous bone from the lumbar vertebrae of ewes. , 1997, Medical engineering & physics.

[16]  R Dumas,et al.  Mechanical characterization in shear of human femoral cancellous bone: torsion and shear tests. , 1999, Medical engineering & physics.

[17]  D P Fyhrie,et al.  Failure mechanisms in human vertebral cancellous bone. , 1994, Bone.

[18]  Ming Ding,et al.  Age‐related variations in the microstructure of human tibial cancellous bone , 2002, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[19]  W C Hayes,et al.  Micro-compression: a novel technique for the nondestructive assessment of local bone failure. , 1998, Technology and health care : official journal of the European Society for Engineering and Medicine.

[20]  L. Gibson,et al.  Modeling the mechanical behavior of vertebral trabecular bone: effects of age-related changes in microstructure. , 1997, Bone.

[21]  C. Christiansen,et al.  Bone mass, bone structure and vertebral fractures in osteoporotic patients. , 1987, Bone.

[22]  R. Recker,et al.  Architecture and vertebral fracture , 1993, Calcified Tissue International.

[23]  Ralph Müller,et al.  Design and implementation of a novel mechanical testing system for cellular solids. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[24]  T M Keaveny,et al.  The dependence of shear failure properties of trabecular bone on apparent density and trabecular orientation. , 1996, Journal of biomechanics.

[25]  M. Kleerekoper,et al.  The role of three-dimensional trabecular microstructure in the pathogenesis of vertebral compression fractures , 1985, Calcified Tissue International.

[26]  R Müller,et al.  Variation in Bone Biomechanical Properties, Microstructure, and Density in BXH Recombinant Inbred Mice , 2001, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[27]  G. Niebur,et al.  High-resolution finite element models with tissue strength asymmetry accurately predict failure of trabecular bone. , 2000, Journal of biomechanics.

[28]  M. Ito,et al.  Effect of trabecular bone contour on ultimate strength of lumbar vertebra after bilateral ovariectomy in rats. , 2001, Bone.

[29]  A. J. Lee,et al.  The shear strength of trabecular bone from the femur, and some factors affecting the shear strength of the cement-bone interface , 1978, Archives of orthopaedic and traumatic surgery.

[30]  M. Kleerekoper,et al.  Irreversible bone loss in osteomalacia. Comparison of radial photon absorptiometry with iliac bone histomorphometry during treatment. , 1985, The Journal of clinical investigation.

[31]  M. Grynpas,et al.  On shear properties of trabecular bone under torsional loading: effects of bone marrow and strain rate. , 2007, Journal of biomechanics.