Microstructure, mechanical properties and deformation behavior of Cr-containing Triplex low-density steels with different C content

[1]  Junye Zhou,et al.  Ultra-high strength medium-Mn lightweight steel by dislocation slip band refinement and suppressed intergranular κ-carbide with Cr addition , 2022, Materials Characterization.

[2]  Junye Zhou,et al.  Relationship between Austenite‐Stabilizing Elements and Austenite Fraction in Near‐Rapidly Solidified Fe–Mn–Al–C Lightweight Steel , 2022, steel research international.

[3]  Kyeong-Won Kim,et al.  Effects of Cr on pitting corrosion resistance and passive film properties of austenitic Fe–19Mn–12Al–1.5 C lightweight steel , 2022, Corrosion Science.

[4]  Hui-bin Wu,et al.  Effect of κ-carbides on the mechanical properties and superparamagnetism of Fe–28Mn–11Al-1.5/1.7C–5Cr lightweight steels , 2022, Materials Science and Engineering: A.

[5]  G. Ji,et al.  The effect of Cr content on intragranular κ-carbide precipitation in Fe-Mn-Al-(Cr)-C low-density steels: A multiscale investigation , 2022, Materials Characterization.

[6]  G. Ji,et al.  Probing the effect of intragranular premature κ-carbide on incipient plasticity behavior in austenite-based Fe-Mn-Al-(Cr)-C steels , 2022, Materials Research Letters.

[7]  G. Ji,et al.  Revisiting the formation mechanism of intragranular κ-carbide in austenite of a Fe-Mn-Al-Cr-C low-density steel , 2021, Scripta Materialia.

[8]  Q. Zhai,et al.  Microstructure and mechanical properties of a Fe–28Mn–9Al-1.2C-(0, 3, 6, 9)Cr austenitic low-density steel , 2021, Materials Science and Engineering: A.

[9]  Dingshun Yan,et al.  Interstitial effects on the incipient plasticity and dislocation behavior of a metastable high-entropy alloy: Nanoindentation experiments and statistical modeling , 2021 .

[10]  I. Gutierrez-Urrutia.  Low Density Fe–Mn–Al–C Steels: Phase Structures, Mechanisms and Properties , 2021, ISIJ International.

[11]  H. Labrim,et al.  A Monte Carlo study of the yttrium-based Heusler alloys: Y2CrGa and YFeCrGa , 2020, Multidiscipline Modeling in Materials and Structures.

[12]  Kyeong-Won Kim,et al.  Characterization of microstructural evolution in austenitic Fe-Mn-Al-C lightweight steels with Cr content , 2020 .

[13]  G. Duscher,et al.  Effect of interstitial oxygen and nitrogen on incipient plasticity of NbTiZrHf high-entropy alloys , 2020 .

[14]  D. Ponge,et al.  Formation mechanism of κ-carbides and deformation behavior in Si-alloyed FeMnAlC lightweight steels , 2020 .

[15]  Dierk Raabe,et al.  A new class of lightweight, stainless steels with ultra-high strength and large ductility , 2020, Scientific Reports.

[16]  B. Rolfe,et al.  Influence of C content and annealing temperature on the microstructures and tensile properties of Fe–13Mn–8Al–(0.7, 1.2)C steels , 2020 .

[17]  Y. Wang,et al.  The effect of Ti–Mo–Nb on the microstructures and tensile properties of a Fe–Mn–Al–C austenitic steel , 2020 .

[18]  Q. Zhai,et al.  Microstructures, mechanical properties and deformation of near-rapidly solidified low-density Fe-20Mn-9Al-1.2C-xCr steels , 2020, Materials & Design.

[19]  H. Labrim,et al.  Phase diagrams, electronic and magnetic properties of the quaternary Heusler alloy NbRhCrAl , 2019, Chinese Journal of Physics.

[20]  Y. Mazaheri,et al.  High strength-elongation balance in ultrafine grained ferrite-martensite dual phase steels developed by thermomechanical processing , 2019, Materials Science and Engineering: A.

[21]  D. Matlock,et al.  Materials for Automotive Lightweighting , 2019, Annual Review of Materials Research.

[22]  H. Labrim,et al.  Magnetism and phase diagrams of the doubles perovskite Sr2 CrIrO6: Monte Carlo simulations , 2019, Physica A: Statistical Mechanics and its Applications.

[23]  Q. Zhai,et al.  Structures and properties of Fe-(8-16)Mn-9Al-0.8C low density steel made by a centrifugal casting in near-rapid solidification , 2019, Materials Science and Engineering: A.

[24]  H. Hong,et al.  Effect of Mo and Cr additions on the microstructure, mechanical properties and pitting corrosion resistance of austenitic Fe-30Mn-10.5Al-1.1C lightweight steels , 2019, Journal of Alloys and Compounds.

[25]  J. Moon,et al.  Effect of Mn and C on Age Hardening of Fe–Mn–Al–C Lightweight Steels , 2018, Metals and Materials International.

[26]  H. Ding,et al.  Microstructural evolution and precipitation behavior of the warm-rolled medium Mn steels containing Nb or Nb-Mo during intercritical annealing , 2018, Materials Science and Engineering: A.

[27]  R. Misra,et al.  Strengthening Mechanisms in Low Density Fe–26Mn–xAl–1C Steels , 2018 .

[28]  R. Misra,et al.  Effect of volume fraction of bainite on strain hardening behavior and deformation mechanism of F/B multi-phase steel , 2018, Materials Science and Engineering: A.

[29]  Sunghak Lee,et al.  Improvement of tensile properties in (austenite+ferrite+κ-carbide) triplex hot-rolled lightweight steels , 2018, Materials Science and Engineering: A.

[30]  Mingxin Huang,et al.  Nanoindentation investigation on the initiation of yield point phenomenon in a medium Mn steel , 2018, Scripta Materialia.

[31]  A. Benyoussef,et al.  Ab-initio calculations for the electronic and magnetic properties of Cr doped ZnTe , 2018, Computational Condensed Matter.

[32]  Changhee Lee,et al.  Investigations of the microstructure evolution and tensile deformation behavior of austenitic Fe-Mn-Al-C lightweight steels and the effect of Mo addition , 2018 .

[33]  M. Herbig,et al.  Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel , 2017 .

[34]  A. Haldar,et al.  Current state of Fe-Mn-Al-C low density steels , 2017 .

[35]  O. A. Zambrano.  A general perspective of Fe–Mn–Al–C steels , 2017, Journal of Materials Science.

[36]  Chang-jiang Song,et al.  A simple method to produce austenite-based low-density Fe–20Mn–9Al–0.75C steel by a near-rapid solidification process , 2017 .

[37]  M. Herbig,et al.  Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel , 2016 .

[38]  H. Ding,et al.  Tensile deformation behavior analysis of low density Fe–18Mn–10Al–xC steels , 2016 .

[39]  R. Song,et al.  Evolution of the microstructure and mechanical properties of an austenite–ferrite Fe–Mn–Al–C steel , 2015 .

[40]  Sunghak Lee,et al.  Novel ultra-high-strength (ferrite + austenite) duplex lightweight steels achieved by fine dislocation substructures (Taylor lattices), grain refinement, and partial recrystallization , 2015 .

[41]  X. An,et al.  Influence of Al content on the strain-hardening behavior of aged low density Fe-Mn-Al-C steels with high Al content , 2015 .

[42]  U. Ramamurty,et al.  Estimation of the Hall–Petch strengthening coefficient of steels through nanoindentation , 2014 .

[43]  H. Ding,et al.  Microstructures and Mechanical Behavior of Fe-18Mn-10Al-(0.8-1.2)C Steels , 2014 .

[44]  Kyung-Tae Park,et al.  Effects of Heat Treatment on Microstructure and Tensile Properties of a Fe-27Mn-12Al-0.8C Low-Density Steel , 2014, JOM.

[45]  Kyung-Tae Park,et al.  Tensile deformation of a low density Fe–27Mn–12Al–0.8C duplex steel in association with ordered phases at ambient temperature , 2013 .

[46]  Kyung-Tae Park.  Tensile deformation of low-density Fe–Mn–Al–C austenitic steels at ambient temperature , 2013 .

[47]  Dong-Woo Suh,et al.  Fe–Al–Mn–C lightweight structural alloys: a review on the microstructures and mechanical properties , 2013, Science and technology of advanced materials.

[48]  D. Park,et al.  Strengthening mechanism of hot rolled Ti and Nb microalloyed HSLA steels containing Mo and W with various coiling temperature , 2013 .

[49]  Mohammed A. Omar,et al.  Design for sustainability in automotive industry: A comprehensive review , 2012 .

[50]  C. Chao,et al.  Effect of Carbon on Spinodal Decomposition in Fe-26Mn-20Al-C Alloys , 2011 .

[51]  K. Ishida,et al.  High-strength Fe–20Mn–Al–C-based Alloys with Low Density , 2010 .

[52]  C. Chao,et al.  Effects of C and Cr content on high-temperature microstructures of Fe-9Al-30Mn-xC-yCr alloys , 2010 .

[53]  Kyung-Tae Park,et al.  Microband-induced plasticity in a high Mn–Al–C light steel , 2008 .

[54]  D. G. Morris,et al.  Work hardening in Fe-Al alloys , 2007 .

[55]  Georg Frommeyer,et al.  Microstructures and Mechanical Properties of High‐Strength Fe‐Mn‐Al‐C Light‐Weight TRIPLEX Steels , 2006 .

[56]  N. Hansen.  Boundary strengthening in undeformed and deformed polycrystals , 2005 .

[57]  S. Zinkle,et al.  On the relationship between uniaxial yield strength and resolved shear stress in polycrystalline materials , 2000 .

[58]  W. Tsai,et al.  Electrochemical polarization and pitting behaviour of Fe-Al-Mn alloys in chloride solutions , 1987 .

[59]  Yoshiyuki Tomita,et al.  Tensile stress-strain analysis of cold worked metals and steels and dual-phase steels , 1985 .

[60]  W. R. Cribb,et al.  Concerning the analysis of tensile stress-strain data using log dσ/dεp versus log σ diagrams , 1973 .

[61]  C. Haase,et al.  On the deformation behavior of κ-carbide-free and κ-carbide-containing high-Mn light-weight steel , 2017 .