Improvement of switching time in a thermocapillarity optical switch

A switching time of 6 ms is achieved in a thermocapillarity switch by lowering the viscosity of the refractive-index-matching oil and improving the switch design. Further improvements would result in sub-ms switching time in this switch.

[1]  R.W. Tkach,et al.  High-density micromachined polygon optical crossconnects exploiting network connection-symmetry , 1998, IEEE Photonics Technology Letters.

[2]  E. L. Warrick,et al.  Melt Viscosities of Dimethylpolysiloxanes , 1955 .

[3]  T. Goh,et al.  Low-loss and high-extinction-ratio silica-based strictly nonblocking 16/spl times/16 thermooptic matrix switch , 1998, IEEE Photonics Technology Letters.

[4]  Ching-Ping Wong,et al.  Index-matching elastomers for fiber optics , 1989 .

[5]  Tomomi Sakata,et al.  Reflection-type 2×2 optical waveguide switch using the Goos–Hänchen shift effect , 2000 .

[6]  M. Makihara,et al.  Micromechanical optical switches based on thermocapillary integrated in waveguide substrate , 1999 .

[7]  Morio Kobayashi,et al.  Loss measurement and analysis of high-silica reflection bending optical waveguides , 1988 .

[8]  Masayuki Okuno,et al.  Low-Loss and High-Extinction-Ratio Silica-Based Strictly Nonblocking 16 · 16 Thermooptic Matrix Switch , 1999 .

[9]  K. Kaneko,et al.  Optical cross-connect switches for optical access network , 1998, 24th European Conference on Optical Communication. ECOC '98 (IEEE Cat. No.98TH8398).

[10]  D. Marcuse.  Loss analysis of single-mode fiber splices , 1977, The Bell System Technical Journal.

[11]  P. Barth,et al.  A compact, scalable cross-connect switch using total internal reflection due to thermally-generated bubbles , 1998, Conference Proceedings. LEOS'98. 11th Annual Meeting. IEEE Lasers and Electro-Optics Society 1998 Annual Meeting (Cat. No.98CH36243).

[12]  Shinji Nagaoka.  Fabrication of Micro-Pipes and Their Applications to Single-Mode Fiber Switching and Splicing , 1997 .

[13]  R. J. Cornish,et al.  Flow in a Pipe of Rectangular Cross-Section , 1928 .

[14]  Fusao Shimokawa,et al.  Low-loss intersecting grooved waveguides with low /spl Delta/ for a self-holding optical matrix switch , 1995 .

[15]  F. Shimokawa,et al.  Multi-element thermo-capillary optical switch and sub-nanoliter oil injection for its fabrication , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[16]  J. E. Fouquet,et al.  Compact optical cross-connect switch based on total internal reflection in a fluid-containing planar lightwave circuit , 2000, Optical Fiber Communication Conference. Technical Digest Postconference Edition. Trends in Optics and Photonics Vol.37 (IEEE Cat. No. 00CH37079).

[17]  Lih Y. Lin,et al.  Free-space micromachined optical switches with submillisecond switching time for large-scale optical crossconnects , 1998, IEEE Photonics Technology Letters.

[18]  Kazuhiko Ogusu,et al.  Transmission characteristics of optical waveguide corners , 1985 .

[19]  R.W. Tkach,et al.  Angular-precision enhancement in free-space micromachined optical switches , 1999, IEEE Photonics Technology Letters.