Electricity from photovoltaic solar cells: Flat-Plate Solar Array Project final report. Volume IV: High-efficiency solar cells

The Flat-Plate Solar Array (FSA) Project, funded by the U.S. Government and managed by the Jet Propulsion Laboratory, was formed in 1975 to develop the module/array technology needed to attain widespread terrestrial use of photovoltaics by 1985. To accomplish this, the FSA Project established and managed an Industry, University, and Federal Government Team to perform the needed research and development (R&D). The High-Efficiency Solar Cells Task was assigned the objective of understanding and developing high-efficiency solar cell devices that would meet the cost and performance goals of the FSA Project. The need for research dealing with high efficiency devices was considered important because of the role efficiency plays in reducing the price per watt of generated energy. This document is a summary of the R&D efforts conducted during the period 1982 to 1986 to provide understanding and control of energy conversion losses associated with crystalline-silicon solar cells. New levels of conversion efficiency (greater than 20 %) were demonstrated. Major contributions were made both to the understanding and reduction of bulk and surface losses in solar cells. For example, oxides, nitrides, and polysilicon were all shown to be potentially useful surface passivants. Improvements in measurement techniques were made and Auger coefficients and spectral absorption data were obtained for unique types of silicon sheet. New modeling software was developed including a program to optimize a device design based on input characteristics of a cell. Although considerable progress was made in this Task, several elements of research were incomplete at the conclusion of the Project.

[1]  Taher Daud,et al.  Front surface passivation of silicon solar cells with antireflection coating , 1987 .

[2]  T. Furtak,et al.  Evaluation and reduction of efficiency losses at tungsten diselenide photoanodes , 1980 .

[3]  F. Lindholm,et al.  Direct experimental determination of voltage across high‐low junctions , 1986 .

[4]  Li-Jen Cheng,et al.  Characterization of the heavily doped emitter and junction regions of silicon solar cells using an electron beam , 1986 .

[5]  P. Landsberg,et al.  A Model for Band‐Gap Shrinkage in Semiconductors with Application to Silicon , 1985 .

[6]  G. Wegner.  Polymers with Metal‐Like Conductivity—A Review of their Synthesis, Structure and Properties , 1981 .

[7]  G. Nagasubramanian,et al.  Effect of Counterions on the Formation of Ohmic Contact Between p‐Si and Poly(pyrrole) Film An AC Impedance Analysis , 1986 .

[8]  P. F. DeDuck,et al.  Assessment of distributed photovoltaic electric-power systems. Summary report , 1982 .

[9]  J. Borenstein,et al.  A Unified Treatment of The Thermal Donor Hierarchies in Silicon and Germanium , 1985 .

[10]  Li-Jen Cheng,et al.  Electron‐beam induced current characterization of back‐surface field solar cells using a chopped scanning electron microscope beam , 1984 .

[11]  Konstantinos Misiakos,et al.  Generalized reciprocity theorem for semiconductor devices , 1985 .

[12]  Richard M. Swanson,et al.  Applied Physics , 1936, Nature.

[13]  R. Greene,et al.  Conducting Organic Materials , 1984, Science.

[14]  A. Briglio,et al.  Annealing Effects in Low- and High-Stress Silicon Ribbon , 1985 .

[15]  G. Nagasubramanian,et al.  Determination of the si-conducting polymer interfacial properties using A-C impedance techniques , 1986 .

[16]  J. Corbett,et al.  Studies of Oxygen Thermal Donor Formation Under Stress , 1985 .