Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al3Ti by salt addition

[1]  M. Qian,et al.  Grain refinement of binary Al-Si, Al-Cu and Al-Ni alloys by ultrasonication , 2017 .

[2]  R. Setchi,et al.  Macro and nanoscale wear behaviour of Al-Al 2 O 3 nanocomposites fabricated by selective laser melting , 2017 .

[3]  Rahul K Gupta,et al.  Mechanical behavior of AZ31/Al2O3 magnesium alloy nanocomposites prepared using ultrasound assisted stir casting , 2017 .

[4]  A. Karabutov,et al.  Combined effects of reinforcement fraction and porosity on ultrasonic velocity in SiC particulate aluminum alloy matrix composites , 2017 .

[5]  J. Myalski,et al.  Friction and wear behavior of Al-SiC(n) hybrid composites with carbon addition , 2017 .

[6]  Ş. Karabulut,et al.  Influence of B4C particle reinforcement on mechanical and machining properties of Al6061/B4C composites , 2016 .

[7]  Henifi Çinici,et al.  Study on the mechanical and drilling properties of AA7039 composites reinforced with Al2O3/B4C/SiC particles , 2016 .

[8]  G. P. Chaudhari,et al.  Strengthening in Al alloy nano composites fabricated by ultrasound assisted solidification technique , 2016 .

[9]  Narendra Kumar,et al.  In-situ development of ZrB2 particles and their effect on microstructure and mechanical properties of AA5052 metal-matrix composites , 2015 .

[10]  D. Eskin,et al.  Application of a plate sonotrode to ultrasonic degassing of aluminum melt: Acoustic measurements and feasibility study , 2015 .

[11]  Zhiwei Liu,et al.  Ultrasound assisted salts–metal reaction for synthesizing TiB2 particles at low temperature , 2015 .

[12]  D. Eskin,et al.  Ultrasonic Treatment of Light Alloy Melts, Second Edition , 2014 .

[13]  Zhiwei Liu,et al.  In situ formed Al_3Ti particles in Al alloy matrix and their effects on the microstructure and mechanical properties of 7075 alloy , 2014 .

[14]  Yi Wu,et al.  Mechanical properties of in-situ TiB2/A356 composites , 2014 .

[15]  A. Elaya Perumal,et al.  Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites , 2013 .

[16]  M. A. Baghchesara,et al.  Fabrication of aluminum matrix composites reinforced with Al2ZrO5 nanoparticles synthesized by sol-gel autocombustion method , 2013 .

[17]  Kyu C. Cho,et al.  Prediction models for the yield strength of particle-reinforced unimodal pure magnesium (Mg) metal matrix nanocomposites (MMNCs) , 2013, Journal of Materials Science.

[18]  B. Kumar,et al.  Metallurgical and mechanical characterization of stir cast AA6061-T6–AlNp composite , 2012 .

[19]  Zhiwei Liu,et al.  Ultrasound assisted in situ technique for the synthesis of particulate reinforced aluminum matrix composites , 2011 .

[20]  R. Keshavamurthy,et al.  A study on microstructure and mechanical properties of Al 6061–TiB2 in-situ composites , 2011 .

[21]  A. Kokabi,et al.  Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing , 2011 .

[22]  Gang Chen,et al.  In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites , 2010 .

[23]  Gang Chen,et al.  Microstructure of in situ Al3Ti/6351Al composites fabricated with electromagnetic stirring and fluxes , 2010 .

[24]  Y. Birol.  Analysis of the response to thermal exposure of Al/K2TiF6 powder blends , 2009 .

[25]  A. Ahmed,et al.  Microstructure and mechanical properties of Ni–P coated Si3N4 reinforced Al6061 composites , 2009 .

[26]  H. M. Hosseini,et al.  Fabrication of high wear resistant Al/Al3Ti metal matrix composite by in situ hot press method , 2009 .

[27]  H. Arik,et al.  Effect of mechanical alloying process on mechanical properties of α-Si3N4 reinforced aluminum-based composite materials , 2008 .

[28]  Y. Fu,et al.  Application of ultrasonic treating to degassing of metal ingots , 2008 .

[29]  B. S. Murty,et al.  Tensile and wear behaviour of in situ Al-7Si/TiB2 particulate composites , 2008 .

[30]  E. Olevsky,et al.  The development of residual stresses in Ti6Al4V-Al3Ti metal-intermetallic laminate (MIL) composites , 2008 .

[31]  A. Basumallick,et al.  Preparation of Ti-aluminide reinforced in situ aluminium matrix composites by reactive hot pressing , 2007 .

[32]  Hengzhi Wang,et al.  Formation of composites fabricated by exothermic dispersion reaction in Al-TiO2-B2O3 system , 2007 .

[33]  Zhang Xiuqing,et al.  The mechanical properties of magnesium matrix composites reinforced with (TiB2 + TiC) ceramic particulates , 2005 .

[34]  T. Meek,et al.  Degassing of molten aluminum A356 alloy using ultrasonic vibration , 2004 .

[35]  Xiaochun Li,et al.  Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy , 2004 .

[36]  Y. Şahin.  Preparation and some properties of SiC particle reinforced aluminium alloy composites , 2003 .

[37]  Kon-Bae Lee,et al.  Tensile properties and microstructures of Al composite reinforced with BN particles , 2002 .

[38]  G. Éskin.  Broad prospects for commercial application of the ultrasonic (cavitation) melt treatment of light alloys. , 2001, Ultrasonics sonochemistry.

[39]  Jin-Ming Wu,et al.  Thermal stability and its effects on the mechanical properties of rapidly solidified Al-Ti alloys , 2000 .

[40]  V. I. Nikitin,et al.  Preparation of Al-Ti-B grain refiner by shs technology , 2000 .

[41]  C. F. Feng,et al.  In-situ P/M Al/(ZrB2+Al2O3) MMCs: Processing, microstructure and mechanical characterization , 1999 .

[42]  C. P. Chang,et al.  The strengthening effect of Al3Ti in ultrafine grained Al-Al3Ti alloys , 1999 .

[43]  V. Murthy,et al.  Nickel aluminide reinforced AlN/Al composites by pressureless infiltration , 1998 .

[44]  G. Eskin.  Ultrasonic Treatment of Light Alloy Melts , 1998 .

[45]  S. Tjong,et al.  In Situ ceramic particle-reinforced aluminum matrix composites fabricated by reaction pressing in the TiO2 (Ti)-Al-B (B2O3) systems , 1997 .

[46]  G. S. Murty,et al.  Metal-ceramic composites via in-situ methods , 1997 .

[47]  F. Sommer,et al.  Properties of Al-Pb base alloys applying electromagnetic forces and ultrasonic vibration during casting , 1995 .

[48]  D. Lloyd.  Particle reinforced aluminium and magnesium matrix composites , 1994 .

[49]  P. Davies,et al.  Properties of reactively cast aluminium–TiB2 alloys , 1993 .

[50]  S. Chen,et al.  Synthesis of Al/Al3Ti two-phase alloys by mechanical alloying , 1992 .

[51]  O. Abramov.  Action of high intensity ultrasound on solidifying metal , 1987 .

[52]  G. Sigworth.  The Grain Refining of Aluminum and Phase Relationships in the Al-Ti-B System , 1984 .

[53]  F. J. Humphreys.  The nucleation of recrystallization at second phase particles in deformed aluminium , 1977 .