Mechanical Properties of Three-Dimensional Printed Combination-Design Truss Lattice Materials: Static and Dynamic Loading

[1]  Zhihua Wang,et al.  Compression behavior of FCC- and BCB-architected materials: theoretical and numerical analysis , 2021, Acta Mechanica.

[2]  V. Shim,et al.  Characterisation and modeling of additively-manufactured polymeric hybrid lattice structures for energy absorption , 2021 .

[3]  Xin Li,et al.  In-plane compression of 3D-printed self-similar hierarchical honeycombs – Static and dynamic analysis , 2020 .

[4]  D. Fang,et al.  Additively-manufactured anisotropic and isotropic 3D plate-lattice materials for enhanced mechanical performance: Simulations & experiments , 2020 .

[5]  D. Fang,et al.  Mechanical performance of topology-optimized 3D lattice materials manufactured via selective laser sintering , 2020 .

[6]  Minh-Son Pham,et al.  Damage-tolerant architected materials inspired by crystal microstructure , 2019, Nature.

[7]  P. Cardiff,et al.  Mechanical behaviour of additively-manufactured polymeric octet-truss lattice structures under quasi-static and dynamic compressive loading , 2019, Materials & Design.

[8]  M. Nikzad,et al.  Fabrication of polymeric lattice structures for optimum energy absorption using Multi Jet Fusion technology , 2018, Materials & Design.

[9]  Jun Liang,et al.  Mechanical properties of an improved 3D-printed rhombic dodecahedron stainless steel lattice structure of variable cross section , 2018, International Journal of Mechanical Sciences.

[10]  T. Tancogne-Dejean,et al.  Stiffness and specific energy absorption of additively-manufactured metallic BCC metamaterials composed of tapered beams , 2018, International Journal of Mechanical Sciences.

[11]  Yanyu Chen,et al.  Exploiting negative Poisson's ratio to design 3D-printed composites with enhanced mechanical properties , 2018 .

[12]  Martin Wegener,et al.  Three-dimensional mechanical metamaterials with a twist , 2017, Science.

[13]  Rashid K. Abu Al-Rub,et al.  Stiffness and yield strength of architectured foams based on the Schwarz Primitive triply periodic minimal surface , 2017 .

[14]  Dirk Mohr,et al.  Large deformation response of additively-manufactured FCC metamaterials: From octet truss lattices towards continuous shell mesostructures , 2017 .

[15]  M. Messner,et al.  Mapping local deformation behavior in single cell metal lattice structures , 2017 .

[16]  T. Tancogne-Dejean,et al.  Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading , 2016 .

[17]  P. Hazell,et al.  Metallic microlattice materials: a current state of the art on manufacturing, mechanical properties and applications , 2016 .

[18]  H. Wadley,et al.  Mechanical response of Ti–6Al–4V octet-truss lattice structures , 2015 .

[19]  Zhihua Wang,et al.  An approximate theoretical analysis for clamped cylindrical sandwich shells with metallic foam cores subjected to impulsive loading , 2014 .

[20]  Recep Gümrük,et al.  Compressive behaviour of stainless steel micro-lattice structures , 2013 .

[21]  L. Valdevit,et al.  Ultralight Metallic Microlattices , 2011, Science.

[22]  Wesley J. Cantwell,et al.  An investigation into the compressive properties of stainless steel micro-lattice structures , 2011 .

[23]  M. Ashby,et al.  Micro-architectured materials: past, present and future , 2010, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[24]  Tongxi Yu,et al.  Collapse of periodic planar lattices under uniaxial compression, part II: Dynamic crushing based on finite element simulation , 2009 .

[25]  Dirk Mohr,et al.  Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: Simulations & experiments , 2019, Journal of the Mechanics and Physics of Solids.

[26]  Harold S. Park,et al.  Mechanical properties of copper octet-truss nanolattices , 2017 .

[27]  Zhihua Wang,et al.  On crushing response of the three-dimensional closed-cell foam based on Voronoi model , 2014 .