Bioinspired, heredity-derived hierarchical bulk multifunctional copper alloys
暂无分享,去创建一个
J. Luan | Z. Lei | Yejun Gu | B. Ding | W. Ren | Peijian Shi | Zhi Li | Huajian Gao | Zhongze Lin | Yinpan Yang | Z. Shen | P. van Aken | Zhe Shen | Hongguang Wang | Yi Li | Jie Yan | Mingyang Wang | Chunyan Ling | Na Min | Jian Peng | Junhua Luan | Tengshi Liu | Yangtao Zhou | Yi Liu | Ningning Liang | Yang Ren | Yunbo Zhong | C.T. Liu | Yuntian Zhu
[1] F. Cao,et al. A hard/soft layered micro-structured CuCrZr alloy with strength, ductility and electrical conductivity synergy , 2023, Materials Characterization.
[2] Guoqing Zu,et al. Effect of Rolling Process and Aging on the Microstructure and Properties of Cu-1.0Cr-0.1Zr Alloy , 2023, Materials.
[3] P. Liaw,et al. A review on the dynamic-mechanical behaviors of high-entropy alloys , 2023, Progress in Materials Science.
[4] Yong Liu,et al. The Effect of Build Orientations on Mechanical and Thermal Properties on Cucrzr Alloys Fabricated by Laser Powder Bed Fusion , 2023, SSRN Electronic Journal.
[5] Zixiao Wu,et al. Microstructure and properties of Cu-Zn-Cr-Zr alloy treated by multistage thermo-mechanical treatment , 2023, Materials Science and Engineering: A.
[6] D. Raabe,et al. A mechanically strong and ductile soft magnet with extremely low coercivity , 2022, Nature.
[7] G. Sha,et al. Uniting tensile ductility with ultrahigh strength via composition undulation , 2022, Nature.
[8] J. Weaver,et al. A damage-tolerant, dual-scale, single-crystalline microlattice in the knobby starfish, Protoreaster nodosus , 2022, Science.
[9] N. Kotov,et al. Multiscale engineered artificial tooth enamel , 2022, Science.
[10] Yonghao Zhao,et al. Enhancing strength and electrical conductivity of Cu–Cr composite wire by two-stage rotary swaging and aging treatments , 2022, Composites Part B: Engineering.
[11] B. Zhang,et al. Stress corrosion cracking resistant nanostructured Al-Mg alloy with low angle grain boundaries , 2021, Acta Materialia.
[12] J. Luan,et al. Anomalous precipitate-size-dependent ductility in multicomponent high-entropy alloys with dense nanoscale precipitates , 2021, Acta Materialia.
[13] J. Jie,et al. Optimization of microstructure and properties of as-cast various Si containing Cu–Cr–Zr alloy by experiments and first-principles calculation , 2021, Materials Science and Engineering: A.
[14] Chenxi Xu,et al. The high performance NiFe layered double hydroxides@ Ti3C2Tx/reduced graphene oxide hybrid catalyst for oxygen evolution reaction , 2021, Journal of Alloys and Compounds.
[15] D. Raabe,et al. Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys , 2021, Science.
[16] E. Bringa,et al. Simulations of primary damage in a High Entropy Alloy: Probing enhanced radiation resistance , 2021, Acta Materialia.
[17] Yonghao Zhao,et al. Breaking Material Property Trade-offs via Macrodesign of Microstructure. , 2021, Nano letters.
[18] W. M. Rainforth,et al. Facile route to bulk ultrafine-grain steels for high strength and ductility , 2020, Nature.
[19] Bin Yang,et al. Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys , 2020 .
[20] Z. Y. Zhang,et al. Nanostructures and nanoprecipitates induce high strength and high electrical conductivity in a CuCrZr alloy , 2020 .
[21] R. Ritchie,et al. Making ultrastrong steel tough by grain-boundary delamination , 2020, Science.
[22] Chao Di,et al. U1 snRNP regulates cancer cell migration and invasion in vitro , 2020, Nature Communications.
[23] F. Barthelat,et al. Impact-resistant nacre-like transparent materials , 2019, Science.
[24] Xiaolei Wu,et al. Perspective on hetero-deformation induced (HDI) hardening and back stress , 2019, Materials Research Letters.
[25] Xiaodong Li,et al. Bioinspired, graphene-enabled Ni composites with high strength and toughness , 2019, Science Advances.
[26] Yanfei Gao,et al. Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae , 2019, Nature Communications.
[27] B. Murray,et al. Enantiodivergent Pd-catalyzed C–C bond formation enabled through ligand parameterization , 2018, Science.
[28] J. Greer,et al. High‐Strength Nanotwinned Al Alloys with 9R Phase , 2018, Advanced materials.
[29] Yuntian Zhu,et al. A multiscale architectured CuCrZr alloy with high strength, electrical conductivity and thermal stability , 2018 .
[30] E. Thomas,et al. High-velocity projectile impact induced 9R phase in ultrafine-grained aluminium , 2017, Nature Communications.
[31] H. Noguchi,et al. Bone-like crack resistance in hierarchical metastable nanolaminate steels , 2017, Science.
[32] Wei Wang,et al. A high strength and high electrical conductivity Cu-Cr-Zr alloy fabricated by cryorolling and intermediate aging treatment , 2017 .
[33] R. Srinivasan,et al. The Interaction of Dislocations and Hydrogen-vacancy Complexes and Its Importance for Deformation- induced Proto Nano-voids Formation in α-Fe , 2015 .
[34] Lixian Sun,et al. A high strength and high electrical conductivity bulk CuCrZr alloy with nanotwins , 2015 .
[35] E. Saiz,et al. Bioinspired structural materials. , 2014, Nature materials.
[36] L. Rong,et al. Effect of continuous extrusion on the microstructure and mechanical properties of a CuCrZr alloy , 2013 .
[37] Joseph M. Pigga,et al. Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper , 2011, Science.
[38] E. Lavernia,et al. Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves , 2009 .
[39] R. Ritchie,et al. Tough, Bio-Inspired Hybrid Materials , 2008, Science.
[40] E. Lavernia,et al. Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu , 2008 .
[41] Richard Weinkamer,et al. Nature’s hierarchical materials , 2007 .
[42] Athanasios Arsenlis,et al. Enabling strain hardening simulations with dislocation dynamics , 2006 .
[43] Eduardo Saiz,et al. Freezing as a Path to Build Complex Composites , 2006, Science.
[44] E. Pereloma,et al. Microstructures and properties of copper processed by equal channel angular extrusion for 1–16 passes , 2004 .
[45] Lei Lu,et al. Ultrahigh Strength and High Electrical Conductivity in Copper , 2004, Science.
[46] Huajian Gao,et al. Materials become insensitive to flaws at nanoscale: Lessons from nature , 2003, Proceedings of the National Academy of Sciences of the United States of America.
[47] Steve Plimpton,et al. Fast parallel algorithms for short-range molecular dynamics , 1993 .
[48] Ryan B. Sills,et al. Fundamentals of Dislocation Dynamics Simulations , 2016 .
[49] A. Hussein,et al. Advances in Discrete Dislocation Dynamics Modeling of Size-Affected Plasticity , 2016 .
[50] S. Dobatkin,et al. Optimization of strength, ductility and electrical conductivity of Cu–Cr–Zr alloy by combining multi-route ECAP and aging , 2016 .
[51] K. Friedrich. Routes for achieving multifunctionality in reinforced polymers and composite structures , 2015 .