Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells

This paper presents the first part of a complete ex-situ characterisation of a wide range of commercial Gas Diffusion Layers (GDLs) used in low temperature and high temperature Proton Exchange Membrane (PEM) fuel cells. Physical and electrical characteristics of the GDLs are reported. The results show that the substrate structure has a significant effect on the mechanical and electrical properties of the GDL. Moreover, the Micro Porous Layer (MPL) structure determines the roughness of the surface, and affects the permeability and porosity of the GDL. It was found that the substrate treatment with PTFE affects the GDL characteristics; PTFE loading increases the GDLs hydrophobicity and permeability, however, decreases its overall porosity and resistivity. Adding a MPL to the substrate, results in a decrease in porosity and permeability and an increase in resistivity. The contact resistance of the GDL and the bipolar plate increases when the GDL thickness and PTFE loading are increased. This technical paper shows a close relationship between GDL materials and their physical characteristics and highlights the importance of optimising GDLs for fuel cell applications.

[1]  R. Pitchumani,et al.  MEASUREMENT AND PREDICTION OF ELECTRICAL CONTACT RESISTANCE BETWEEN GAS DIFFUSION LAYERS AND BIPOLAR PLATE FOR APPLICATIONS TO PEM FUEL CELLS , 2004 .

[2]  Xianguo Li,et al.  Measurement of through-plane effective thermal conductivity and contact resistance in PEM fuel cell diffusion media , 2010 .

[3]  Wei-Hung Chen,et al.  Washing Experiment of the Gas Diffusion Layer in a Proton-Exchange Membrane Fuel Cell , 2008 .

[4]  Ying Liu,et al.  Estimation of contact resistance in proton exchange membrane fuel cells , 2006 .

[5]  Satish G. Kandlikar,et al.  Uneven gas diffusion layer intrusion in gas channel arrays of proton exchange membrane fuel cell and its effects on flow distribution , 2009 .

[6]  A. Tamayol,et al.  Water permeation through gas diffusion layers of proton exchange membrane fuel cells , 2011 .

[7]  D. Ingham,et al.  Effect of polytetrafluoroethylene-treatment and microporous layer-coating on the electrical conductivity of gas diffusion layers used in proton exchange membrane fuel cells , 2010 .

[8]  Bruno G. Pollet,et al.  Gas Diffusion Media and their Degradation , 2012 .

[9]  Chao-Yang Wang,et al.  In Situ Current Distribution Measurements in Polymer Electrolyte Fuel Cells , 2003 .

[10]  Y. Lai,et al.  Channel intrusion of gas diffusion media and the effect on fuel cell performance , 2008 .

[11]  J. W. Van Zee,et al.  The effects of compression and gas diffusion layers on the performance of a PEM fuel cell , 1999 .

[12]  P. Lund,et al.  Measurement of current distribution in a free-breathing PEMFC , 2002 .

[13]  Walter Mérida,et al.  Gas diffusion layer durability under steady-state and freezing conditions , 2007 .

[14]  Hongtan Liu,et al.  Effects of the electrical resistances of the GDL in a PEM fuel cell , 2006 .

[15]  S. Litster,et al.  PEM fuel cell electrodes , 2004 .

[16]  Yuh-Shan Ho,et al.  Gas diffusion layer for proton exchange membrane fuel cells—A review , 2009 .

[17]  Bruno G. Pollet,et al.  The effect of materials on proton exchange membrane fuel cell electrode performance , 2011 .

[18]  David Blackwell,et al.  Water flow in the gas diffusion layer of PEM fuel cells , 2005 .

[19]  E. Rideal,et al.  Fuel Cells , 1958, Nature.

[20]  Chang-Soo Kim,et al.  Effect of PTFE contents in the gas diffusion media on the performance of PEMFC , 2004 .

[21]  Chao-Yang Wang,et al.  Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell , 2004 .

[22]  Hongtan Liu,et al.  A novel technique for measuring current distributions in PEM fuel cells , 2006 .

[23]  M. Fowler,et al.  In-plane and through-plane gas permeability of carbon fiber electrode backing layers , 2006 .

[24]  P. Haldar,et al.  Effect of surface roughness of composite bipolar plates on the contact resistance of a proton exchange membrane fuel cell , 2009 .

[25]  Jiujun Zhang,et al.  Micro-porous layer with composite carbon black for PEM fuel cells , 2006 .

[26]  Chao-Yang Wang,et al.  Electron Transport in PEFCs , 2004 .

[27]  P. Haridoss,et al.  Effect of electrochemical aging on the interaction between gas diffusion layers and the flow field i , 2011 .

[28]  C. Du,et al.  Treatment and characterization of gas diffusion layers by sucrose carbonization for PEMFC applications , 2008 .

[29]  P. Wilde,et al.  Structural and Physical Properties of GDL and GDL/BPP Combinations and their Influence on PEMFC Performance , 2004 .

[30]  Jiujun Zhang,et al.  A review of water flooding issues in the proton exchange membrane fuel cell , 2008 .

[31]  B. Popov,et al.  Effect of carbon loading in microporous layer on PEM fuel cell performance , 2006 .

[32]  EunAe Cho,et al.  Influence of cathode gas diffusion media on the performance of the PEMFCs , 2004 .

[33]  Andrew Higier,et al.  Effect of gas diffusion layer compression on PEM fuel cell performance , 2006 .

[34]  Paul A. Webb,et al.  An Introduction To The Physical Characterization of Materials by Mercury Intrusion Porosimetry with Emphasis On Reduction And Presentation of Experimental Data , 2006 .

[35]  Thomas A. Trabold,et al.  Effects of Flow Field and Diffusion Layer Properties on Water Accumulation in a PEM Fuel Cell , 2007 .

[36]  Prathap Haridoss,et al.  Effect of cyclic compression on structure and properties of a Gas Diffusion Layer used in PEM fuel cells , 2010 .

[37]  James M. Fenton,et al.  Characterization of Gas Diffusion Layers for PEMFC , 2004 .

[38]  Matthew M. Mench,et al.  Fuel Cell Engines , 2008 .

[39]  K. Lum,et al.  Optimization of assembly clamping pressure on performance of proton-exchange membrane fuel cells , 2010 .

[40]  M. Fowler,et al.  Influence of micro-porous layer and operating conditions on the fluoride release rate and degradation of PEMFC membrane electrode assemblies , 2008 .

[41]  Jenn-Jiang Hwang,et al.  Effect of clamping pressure on the performance of a PEM fuel cell , 2007 .

[42]  N. Djilali,et al.  Effective thermal conductivity and thermal contact resistance of gas diffusion layers in proton exchange membrane fuel cells. Part 2: Hysteresis effect under cyclic compressive load , 2010 .

[43]  Z. Fishman,et al.  Heterogeneous Through-Plane Distributions of Tortuosity, Effective Diffusivity, and Permeability for PEMFC GDLs , 2011 .

[44]  Suresh G. Advani,et al.  Experimental characterization of in-plane permeability of gas diffusion layers , 2006 .