Abstract In the field of fossil-fuel based technologies, natural gas combined cycle (NGCC) power plants are currently the best option for electricity generation, having an efficiency close to 60%. However, they produce significant CO2 emissions, amounting to around 0.4 tonne/MWh for new installations. Among the carbon capture and sequestration (CCS) technologies, the process based on chemical absorption is a well-established technology, but markedly reduces the NGCC performances. On the other side, the integration of molten carbonate fuel cells (MCFCs) is recognized as an attractive option to overcome the main drawbacks of traditional CCS technologies. If the cathode side is fed by NGCC exhaust gases, the MCFC operates as a CO2 concentrator, beside providing an additional generating capacity. In this paper the integration of MCFC into a two pressure levels combined cycle is investigated through an energy analysis. To improve the efficiency of MCFC and its integration within the NGCC, plant configurations based on two different gas recirculation options are analyzed. The first is a traditional recirculation of exhaust gases at the compressor inlet; the second, mainly involving the MCFC stack, is based on recirculating a fraction of anode exhaust gases at the cathode inlet. Effects of MCFC operating conditions on energy and environmental performances of the integrated system are evaluated.
[1]
H. Atakül,et al.
A basic model for analysis of molten carbonate fuel cell behavior
,
2007
.
[2]
Umberto Desideri,et al.
MCFC-based CO2 capture system for small scale CHP plants
,
2012
.
[3]
Paolo Chiesa,et al.
Using MCFC for high efficiency CO2 capture from natural gas combined cycles: Comparison of internal and external reforming
,
2013
.
[4]
G. Cinti,et al.
Carbon capture with molten carbonate fuel cells: Experimental tests and fuel cell performance assessment
,
2012
.
[5]
Paolo Chiesa,et al.
Application of MCFCs for active CO2 capture within natural gas combined cycles
,
2011
.
[6]
Di Daniele Fraternali,et al.
Le emissioni di centrali a ciclo combinato: Analisi e conkowo con impianti tennoelettrici tradizionali
,
2003
.
[7]
Edward S. Rubin,et al.
The outlook for improved carbon capture technology
,
2012
.
[8]
G. Manzolini,et al.
CO2 capture from combined cycles integrated with Molten Carbonate Fuel Cells
,
2010
.