Optimized rectenna design

Design steps are outlined for maximizing the RF-to-dc power conversion efficiency (PCE) of a rectenna. It turns out that at a frequency of 868 MHz, a high-ohmic loaded rectifier will lead to a highly sensitive and power conversion efficient rectenna. It is demonstrated that a rectenna thus designed, using a 50 O antenna and lumped element matching network gives a superior PCE compared with state of the art also for lower resistive loading. By omitting the matching network and directly, conjugate impedance matching the antenna to the rectifier, the PCE may be further increased and the rectenna size reduced as it is demonstrated with a rectenna prototype measuring only 0.028 squared wavelengths at 868 MHz and demonstrating a PCE of 55% for a -10 dBm RF input power level.

[1]  G. Monti,et al.  UHF Wearable Rectenna on Textile Materials , 2013, IEEE Transactions on Antennas and Propagation.

[2]  Jussi Rahola,et al.  Power Waves and Conjugate Matching , 2008, IEEE Transactions on Circuits and Systems II: Express Briefs.

[3]  Wouter A. Serdijn,et al.  Co-Design of a CMOS Rectifier and Small Loop Antenna for Highly Sensitive RF Energy Harvesters , 2014, IEEE Journal of Solid-State Circuits.

[4]  Hiroyuki Arai,et al.  DTV band micropower RF energy-harvesting circuit architecture and performance analysis , 2011, 2011 IEEE International Conference on RFID-Technologies and Applications.

[5]  H. J. Visser,et al.  Novel broadband Yagi-Uda antenna for ambient energy harvesting , 2012, 2012 42nd European Microwave Conference.

[6]  Danilo De Donno,et al.  An UHF RFID Energy-Harvesting System Enhanced by a DC-DC Charge Pump in Silicon-on-Insulator Technology , 2013, IEEE Microwave and Wireless Components Letters.

[7]  H. J. Visser.  Printed folded dipole antenna design for rectenna and RFID applications , 2013, 2013 7th European Conference on Antennas and Propagation (EuCAP).

[8]  M. Tentzeris,et al.  A Compact Dual-Band Rectenna Using Slot-Loaded Dual Band Folded Dipole Antenna , 2013, IEEE Antennas and Wireless Propagation Letters.

[9]  Zoya Popovic,et al.  A harmonically-terminated two-gram low-power rectenna on a flexible substrate , 2013, 2013 IEEE Wireless Power Transfer (WPT).

[10]  Hubregt J. Visser.  Design considerations for low-power, high-sensitivity rectennas , 2014, The 8th European Conference on Antennas and Propagation (EuCAP 2014).

[11]  Hubregt J. Visser,et al.  Approximate Antenna Analysis for CAD , 2009 .

[12]  K. Yoshida,et al.  Energy Harvesting Circuit on a One-Sided Directional Flexible Antenna , 2013, IEEE Microwave and Wireless Components Letters.

[13]  Hubregt J. Visser,et al.  Efficient direct-matching rectenna design for RF power transfer applications , 2013 .

[14]  Hubregt J. Visser,et al.  RF Energy Harvesting and Transport for Wireless Sensor Network Applications: Principles and Requirements , 2013, Proceedings of the IEEE.

[15]  M. Yamada,et al.  High efficiency small-sized rectenna using a high-Q LC resonator for long distance WPT at 950 MHz , 2012, 2012 IEEE MTT-S International Microwave Workshop Series on Innovative Wireless Power Transmission: Technologies, Systems, and Applications.

[16]  Ke Wu,et al.  Wireless Power Transmission, Technology, and Applications [Scanning the Issue] , 2013, Proc. IEEE.

[17]  Apostolos Georgiadis,et al.  Flexible hybrid solar/EM energy harvester for autonomous sensors , 2011, 2011 IEEE MTT-S International Microwave Symposium.