A method using beam search to design the lay-ups of composite laminates with many plies

Abstract Due to high specific strength and stiffness ratios, composite materials are widely used in industries where minimising structural mass is of paramount importance, such as the aerospace sector. However, designing lightweight composite laminates is challenging due to the large number of discrete design variables involved, e.g. ply numbers and fibre orientations which are usually restricted to a set of predefined values. The number of possible laminate solutions grows exponentially with increasing ply count, quickly rendering complete enumeration impossible. Current mixed-integer programming techniques for designing composite laminates with many plies either exhibit insufficient design space exploration, or demand inconceivable computational effort. As a result, laminates often have sub-optimal properties, e.g. excessive weight. We propose a novel deterministic optimiser for finding the lay-up of composite laminates with many plies. Lay-ups must match desired stiffness properties called Lamination Parameters (LPs). The design-space is explored by a procedure that uses beam search to promote fast convergence towards optimal or near-optimal solutions. Additionally, the optimality of the design solutions is improved by local searches which are performed after a first guess of the stacking sequences. The proposed optimiser is shown to retrieve symmetric laminate lay-ups with as many as 300 plies within a few minutes.

[1]  David Bassir,et al.  Incorporating industrial constraints for multiobjective optimization of composite laminates using a GA , 2008 .

[2]  Angela Vincenti,et al.  A general strategy for the optimal design of composite laminates by the polar-genetic method , 2011 .

[3]  M. Zhou,et al.  Optimization of Composite: Recent Advances and Application , 2010 .

[4]  Joaquim R. R. A. Martins,et al.  A laminate parametrization technique for discrete ply-angle problems with manufacturing constraints , 2013 .

[5]  N. J. Pagano,et al.  INVARIANT PROPERTIES OF COMPOSITE MATERIALS. , 1968 .

[6]  Manohar P. Kamat,et al.  OPTIMIZATION OF STIFFENED LAMINATED COMPOSITE PLATES WITH FREQUENCY CONSTRAINTS , 1987 .

[7]  Stéphane Grihon,et al.  A primal-dual backtracking optimization method for blended composite structures , 2012 .

[8]  Zafer Gürdal,et al.  Stacking Sequence Dispersion and Tow-Placement for Improved Damage Tolerance , 2008 .

[9]  Erik Lund,et al.  Topology and thickness optimization of laminated composites including manufacturing constraints , 2013 .

[10]  Angela Vincenti,et al.  Optimization of Laminated Composites by Using Genetic Algorithm and the Polar Description of Plane Anisotropy , 2013 .

[11]  Terence Macquart,et al.  Aeroelastic Tailoring of Blended Composite Structures using Lamination Parameters , 2016 .

[12]  M. Shakeri,et al.  A review on optimization of composite structures Part I: Laminated composites , 2018, Composite Structures.

[13]  Damiano Pasini,et al.  Optimum stacking sequence design of composite materials Part I: Constant stiffness design , 2009 .

[14]  Paul M. Weaver,et al.  Optimisation of Anisotropic Composite Plates Incorporating Non-Conventional Ply Orientations , 2008 .

[15]  Xiaoyang Liu,et al.  Two-level layup optimization of composite laminate using lamination parameters , 2019, Composite Structures.

[16]  Akira Todoroki,et al.  Object-Oriented Approach to Optimize Composite Laminated Plate Stiffness with Discrete Ply Angles , 1996 .

[17]  H JacobsonSheldon,et al.  Branch-and-bound algorithms , 2016 .

[18]  Paul M. Weaver,et al.  Lay-up Optimization of Laminated Composites Using a Modified Branch and Bound Method , 2018, The Open Mechanical Engineering Journal.

[19]  Tai-Yan Kam,et al.  OPTIMUM LAYUP OF THICK LAMINATED COMPOSITE PLATES FOR MAXIMUM STIFFNESS , 1992 .

[20]  Prabhat Hajela,et al.  Optimal design of laminated composites using a modified mixed integer and discrete programming algorithm , 1989 .

[21]  Raphael T. Haftka,et al.  Structural optimization complexity: what has Moore’s law done for us? , 2004 .

[22]  Marco Montemurro,et al.  Least-weight composite plates with unconventional stacking sequences: Design, analysis and experiments , 2019, Journal of Composite Materials.

[23]  Akira Todoroki,et al.  Improved Fractal Branch and Bound Method for Stacking-Sequence Optimizations of Laminates , 2004 .

[24]  Sheldon H. Jacobson,et al.  Branch-and-bound algorithms: A survey of recent advances in searching, branching, and pruning , 2016, Discret. Optim..

[25]  Tae-Uk Kim,et al.  Optimal design of composite laminated plates with the discreteness in ply angles and uncertainty in material properties considered , 2001 .

[26]  Y. Narita.  Layerwise optimization for the maximum fundamental frequency of laminated composite plates , 2003 .

[27]  David Kennedy,et al.  Towards global layup optimization of composite panels with initial buckling constraints , 2010 .

[28]  Akira Todoroki,et al.  Stacking Sequence Optimizations Using Fractal Branch and Bound Method for Laminated Composites , 2001 .

[29]  Sheldon Howard Jacobson,et al.  A Branch, Bound, and Remember Algorithm for the Simple Assembly Line Balancing Problem , 2012, INFORMS J. Comput..

[30]  Raphael T. Haftka,et al.  Stacking sequence optimization of simply supported laminates with stability and strain constraints , 1992 .

[31]  Erik Lund,et al.  Discrete material optimization of general composite shell structures , 2005 .

[32]  Mathias Stolpe,et al.  Global blending optimization of laminated composites with discrete material candidate selection and thickness variation , 2015 .

[33]  Thierry N. Massard,et al.  Computer Sizing of Composite Laminates for Strength , 1984 .

[34]  Paul M. Weaver,et al.  Lay-Up Optimization of Composite Stiffened Panels Using Linear Approximations in Lamination Space , 2008 .

[35]  Paolo Vannucci,et al.  Stiffness design of laminates using the polar method , 2001 .

[36]  J. L. Walsh,et al.  Stacking-Sequence Optimization for Buckling of Laminated Plates by Integer Programming , 1991 .

[37]  Erik Lund,et al.  Material interpolation schemes for unified topology and multi-material optimization , 2011 .

[38]  Akira Todoroki,et al.  Stacking Sequence Optimizations Using Fractal Branch and Bound Method , 2002 .

[39]  Terence Macquart,et al.  OPTIBLESS: An Open-source Toolbox for the Optimisation of Blended Stacking Sequence , 2016 .

[40]  E. Barbero.  Introduction to Composite Materials Design , 1998 .

[41]  Koetsu Yamazaki,et al.  Two-level optimization technique of composite laminate panels by genetic algorithms , 1996 .

[42]  S. Grihon,et al.  A constraint satisfaction programming approach for computing manufacturable stacking sequences , 2014 .

[43]  J. A. Bailie,et al.  A SUMMARY AND REVIEW OF COMPOSITE LAMINATE DESIGN GUIDELINES , 1997 .

[44]  Hisao Fukunaga,et al.  On Isotropic Laminate Configurations , 1990 .

[45]  Paul M. Weaver,et al.  Optimization of Long Anisotropic Laminated Fiber Composite Panels with T-Shaped Stiffeners , 2007 .

[46]  M. Autio,et al.  Determining the real lay-up of a laminate corresponding to optimal lamination parameters by genetic search , 2000 .