Development of Asphalt Dynamic Modulus Master Curve Using Falling Weight Deflectometer Measurements, TR-659

The asphalt concrete (AC) dynamic modulus (|E*|) is a key design parameter in mechanistic-based pavement design methodologies such as the American Association of State Highway and Transportation Officials (AASHTO) Mechanistic Empirical Pavement Design Guide (MEPDG)/Pavement-ME Design. The objective of this feasibility study was to develop frameworks for predicting the AC |E*| master curve from falling weight deflectometer (FWD) deflection-time history data collected by the Iowa Department of Transportation (Iowa DOT). A neural networks (NN) methodology was developed based on a synthetically generated viscoelastic forward solutions database to predict AC relaxation modulus (E(t)) master curve coefficients from FWD deflection-time history data. According to the theory of viscoelasticity, if AC relaxation modulus, E(t), is known, |E*| can be calculated (and vice versa) through numerical inter-conversion procedures. Several case studies focusing on full-depth AC pavements were conducted to isolate potential backcalculation issues that are only related to the modulus master curve of the AC layer. For the proof-of-concept demonstration, a comprehensive full-depth AC analysis was carried out through 10,000 batch simulations using a viscoelastic forward analysis program. Anomalies were detected in the comprehensive raw synthetic database and were eliminated through imposition of certain constraints involving the sigmoid master curve coefficients. The surrogate forward modeling results showed that NNs are able to predict deflection-time histories from E(t) master curve coefficients and other layer properties very well. The NN inverse modeling results demonstrated the potential of NNs to backcalculate the E(t) master curve coefficients from single-drop FWD deflection-time history data, although the current prediction accuracies are not sufficient to recommend these models for practical implementation. Considering the complex nature of the problem investigated with many uncertainties involved, including the possible presence of dynamics during FWD testing (related to the presence and depth of stiff layer, inertial and wave propagation effects, etc.), the limitations of current FWD technology (integration errors, truncation issues, etc.), and the need for a rapid and simplified approach for routine implementation, future research recommendations have been provided making a strong case for an expanded research study.

[1]  R. Al-Khoury,et al.  Spectral element technique for efficient parameter identification of layered media; Part II; Inverse calculation , 2001 .

[2]  S A Ketcham Dynamic response measurements and identification analysis of a pavement during falling-weight deflectometer experiments , 1993 .

[3]  Dieter Stolle,et al.  Modelling of dynamic response of pavements to impact loading , 1991 .

[4]  Halil Ceylan,et al.  Accuracy of Predictive Models for Dynamic Modulus of Hot-Mix Asphalt , 2009 .

[5]  Erol Tutumluer,et al.  GRANULAR BASE MODULI FOR MECHANISTIC PAVEMENT DESIGN. , 1997 .

[6]  Kasthurirangan Gopalakrishnan,et al.  Neural Network–Swarm Intelligence Hybrid Nonlinear Optimization Algorithm for Pavement Moduli Back-Calculation , 2010 .

[7]  S. W. Park,et al.  Methods of interconversion between linear viscoelastic material functions. Part I-a numerical method based on Prony series , 1999 .

[8]  Karim Chatti,et al.  Backcalculation of Dynamic Modulus Mastercurve from Falling Weight Deflectometer Surface Deflections , 2011 .

[9]  N Paul Khosla,et al.  DETERMINATION OF LAYER MODULI USING A FALLING WEIGHT DEFLECTOMETER , 1987 .

[10]  Karim Chatti,et al.  Data requirements from falling weight deflectometer tests for accurate backcalculation of dynamic modulus master curve of asphalt pavements , 2013 .

[11]  Kunihito Matsui,et al.  Time Domain Backcalculation of Pavement Structure Material Properties Using 3D FEM with Ritz Vectors , 2001 .

[12]  Robert L. Lytton,et al.  DEVELOPMENT AND VALIDATION OF PERFORMANCE PREDICTION MODELS AND SPECIFICATIONS FOR ASPHALT BINDERS AND PAVING MIXES , 1993 .

[13]  R N Nilsson,et al.  Viscoelastic Analysis of Full-Scale Pavements: Validation of VEROAD , 1996 .

[14]  Kasthurirangan Gopalakrishnan,et al.  Characterization of NAPTF subgrade soils for mechanistic-based analysis and design of airport flexible pavements , 2007 .

[15]  Simon Haykin,et al.  Neural Networks: A Comprehensive Foundation , 1998 .

[16]  Kasthurirangan Gopalakrishnan,et al.  Instantaneous pavement condition evaluation using non-destructive neuro-evolutionary approach , 2012 .

[17]  Karim Chatti,et al.  Dynamic Time Domain Backcalculation of Layer Moduli, Damping, and Thicknesses in Flexible Pavements , 2004 .

[18]  Halil Ceylan,et al.  Finite element based hybrid evolutionary optimization approach to solving rigid pavement inversion problem , 2012, Engineering with Computers.

[19]  Simon GrenierS. Grenier,et al.  Dynamic simulation of falling weight deflectometer tests on flexible pavements using the spectral element method: forward calculations , 2009 .

[20]  Kenneth H. Stokoe,et al.  Response of pavement systems to dynamic loads imposed by nondestructive tests , 1995 .

[21]  Yumin Vincent Kang,et al.  MULTIFREQUENCY BACK-CALCULATION OF PAVEMENT-LAYER MODULI , 1998 .

[22]  Erol Tutumluer Predicting behavior of flexible pavements with granular bases , 1995 .

[23]  Matthew W Witczak,et al.  Asphalt Mix Master Curve Construction Using Sigmoidal Fitting Function with Non-Linear Least Squares Optimization , 2003 .

[24]  Robert Y. Liang,et al.  Efficient Dynamic Analysis of Multilayered System during Falling Weight Deflectometer Experiments , 2002 .

[25]  Halil Ceylan,et al.  Nondestructive Evaluation of Iowa Pavements-Phase I , 2007 .

[26]  Robert Y. Liang,et al.  Efficient computational algorithms for forward and backward analysis of a dynamic pavement system , 1998 .

[27]  Jose M. Roesset Stiffness and Damping Coefficients of Foundations , 1991 .

[28]  Halil Ceylan,et al.  Hot Mix Asphalt Dynamic Modulus Prediction Using Kernel Machines , 2009 .

[29]  R. LeVeque Finite Volume Methods for Hyperbolic Problems: Characteristics and Riemann Problems for Linear Hyperbolic Equations , 2002 .

[30]  L H Irwin Backcalculation: an overview and perspective , 2002 .

[31]  R. Al-Khoury,et al.  Spectral element technique for efficient parameter identification of layered media. Part III: viscoelastic aspects , 2002 .

[32]  Pietro Leandri,et al.  A New Step Towards Performance Based Specifications for Asphalt Pavements , 2007 .

[33]  Edward T. Harrigan,et al.  NAtioNAl CooperAtive HigHwAy reseArCH progrAm , 2013 .

[34]  Der-Wen Chang,et al.  EFFECT OF DEPTH TO BEDROCK ON DEFLECTION BASINS OBTAINED WITH DYNAFLECT AND FALLING WEIGHT DEFLECTOMETER TESTS , 1992 .

[35]  Eyal Levenberg,et al.  Viscoelastic Genetic Algorithm for Inverse Analysis of Asphalt Layer Properties from Falling Weight Deflections , 2013 .

[36]  S R Ranjithan,et al.  Dynamic Analysis-Based Approach To Determine Flexible Pavement Layer Moduli Using Deflection Basin Parameters , 1998 .

[37]  Sunghwan Kim,et al.  Global Optimization of Pavement Structural Parameters during Back-Calculation Using Hybrid Shuffled Complex Evolution Algorithm , 2010, J. Comput. Civ. Eng..

[38]  Nenad Gucunski,et al.  Backcalculation of Pavement Profiles from Spectral-Analysis-of-Surface-Waves Test by Neural Networks Using Individual Receiver Spacing Approach , 1996 .

[39]  Erol Tutumluer,et al.  Nondestructive Pavement Evaluation Using ILLI-PAVE Based Artificial Neural Network Models , 2006 .

[40]  Per Ullidtz,et al.  Will Nonlinear Backcalculation Help , 2000 .

[41]  Jw Maina,et al.  DYNAMIC BACKCALCULATION AND OVERLAY DESIGN BASED ON FWD DATA , 2000 .

[42]  Michael W. O'Neill Dynamic Response of Pile Foundations : Analytical Aspects , 1980 .

[43]  Halil Ceylan,et al.  Airfield pavement deterioration assessment using stress-dependent neural network models , 2009 .

[44]  J Uzan,et al.  Advanced Backcalculation Techniques , 1994 .

[45]  Halil Ceylan Analysis and Design of Concrete Pavement Systems Using Artificial Neural Networks , 2002 .

[46]  Carl L Monismith,et al.  DYNAMIC RESPONSE OF PAVING MATERIALS , 1987 .

[47]  A. Burak Göktepe,et al.  Advances in backcalculating the mechanical properties of flexible pavements , 2006, Adv. Eng. Softw..

[48]  Mark Dougherty,et al.  A REVIEW OF NEURAL NETWORKS APPLIED TO TRANSPORT , 1995 .

[49]  David Cebon,et al.  Response of Continuous Pavements to Moving Dynamic Loads , 1993 .

[50]  Jacob Uzan Dynamic linear back calculation of pavement material parameters , 1994 .

[51]  E. Kausel,et al.  Stiffness matrices for layered soils , 1981 .

[52]  Kunihito Matsui,et al.  An efficient backcalculation algorithm of time domain for large-scale pavement structures using Ritz vectors , 2002 .

[53]  K H Stokoe,et al.  DYNAMIC INTERPRETATION OF DYNAFLECT AND FALLING WEIGHT DEFLECTOMETER TESTS ON PAVEMENT SYSTEMS. INTERIM REPORT , 1985 .

[54]  George Turkiyyah Feasibility of Backcalculation Procedures Based on Dynamic FWD Response Data , 2005 .

[55]  Kasthurirangan Gopalakrishnan,et al.  Co-variance matrix adaptation evolution strategy for pavement backcalculation , 2010 .

[56]  Jeffery Raphael Roesler,et al.  DIPLOBACK: Neural-Network-Based Backcalculation Program for Composite Pavements , 1997 .

[57]  Karim Chatti,et al.  EVALUATION OF NONLINEAR AND DYNAMIC EFFECTS ON ASPHALT PAVEMENTS RESPONSE UNDER FWD LOADING , 2003 .

[58]  Don R. Alexander,et al.  Using Artificial Neural Networks as a Forward Approach to Backcalculation , 1997 .

[59]  Michael S Mamlouk Use of Dynamic Analysis in Predicting Field Multilayer Pavement Moduli (Discussion and Closure) , 1985 .

[60]  A H Magnuson COMPUTER ANALYSIS OF FALLING-WEIGHT DEFLECTOMETER DATA, PART I: VERTICAL DISPLACEMENT COMPUTATIONS ON THE SURFACE OF A UNIFORM (ONE-LAYER) HALF-SPACE DUE TO AN OSCILLATING SURFACE PRESSURE DISTRIBUTION. FINAL REPORT , 1988 .

[61]  Robert L. Lytton,et al.  COMPARISON OF COMPUTER PREDICTIONS AND FIELD DATA FOR DYNAMIC ANALYSIS OF FALLING WEIGHT DEFLECTOMETER DATA , 1991 .

[62]  Mark Beale,et al.  Neural Network Toolbox™ User's Guide , 2015 .

[63]  Samir N. Shoukry,et al.  Performance Evaluation of Backcalculation Algorithms Through Three-Dimensional Finite-Element Modeling of Pavement Structures , 1999 .

[64]  Kasthurirangan Gopalakrishnan,et al.  Pavement moduli variation under heavy aircraft trafficking , 2006 .

[65]  Hojjat Adeli,et al.  Neural Networks in Civil Engineering: 1989–2000 , 2001 .

[66]  Halil Ceylan,et al.  Development of a fully automated software system for rapid analysis/processing of the falling weight deflectometer data. , 2009 .

[67]  Matthew W Witczak,et al.  Simple Performance Tests: Summary of Recommended Methods and Database , 2005 .

[68]  Michael S Mamlouk,et al.  ELASTO-DYNAMIC ANALYSIS OF PAVEMENT DEFLECTIONS , 1984 .

[69]  R. Al-Khoury,et al.  Spectral element technique for efficient parameter identification of layered media. I. Forward calculation , 2001 .

[70]  Robert L. Lytton Backcalculation of Pavement Layer Properties , 1989 .

[71]  Andy Collop,et al.  Stiffness reductions of flexible pavements due to cumulative fatigue damage , 1996 .

[72]  N Stubbs,et al.  A Methodology to Identify Material Properties in Pavements Modeled as Layered Viscoelastic Halfspaces (Theory) , 1994 .

[73]  Johan Blaauwendraad,et al.  Poroelastic spectral element for wave propagation and parameter identification in multi-layer systems , 2002 .

[74]  Gerardo W. Flintsch,et al.  Soft Computing Applications in Infrastructure Management , 2004 .

[75]  David E. Newcomb,et al.  COMPARISON OF DYNAMIC AND STATIC BACKCALCULATION MODULI FOR THREE-LAYER PAVEMENTS , 1991 .

[76]  Halil Ceylan,et al.  Improving the Accuracy and Usability of Iowa Falling Weight Deflectometer Data , 2013 .

[77]  Sameh Zaghloul,et al.  USE OF A THREE-DIMENSIONAL, DYNAMIC FINITE ELEMENT PROGRAM FOR ANALYSIS OF FLEXIBLE PAVEMENT , 1993 .

[78]  Simon GrenierS. Grenier,et al.  Dynamic interpretation of falling weight deflectometer tests on flexible pavements using the spectral element method: backcalculation , 2009 .