Nonlinear analysis of members curved in space with warping and Wagner effects

Abstract The centroidal axis of a member that is curved in space is generally a space curve. The curvature of the space curve is not necessarily in the direction of either of the principal axes of the cross-section, but can be resolved into components in the directions of both of these principal axes. Hence, a member curved in space is primarily subjected to combined compressive, biaxial bending and torsional actions under vertical (or gravity) loading. In addition, warping actions in particular may occur in curved members with an open thin-walled cross-section, and as the deformations increase, significant interactions of the compressive, biaxial bending and torsional actions occur and profoundly nonlinear deformations are developed in the nonlinear range of structural response. This makes the nonlinear behaviour of a member curved in space very complicated, making it difficult to obtain a consistent differential equation of equilibrium for the nonlinear analysis of members curved in space. In addition, because torsion is one of the primary actions in these members, when the torsional deformations become large, the Wagner effects including both Wagner moment and the conjugate Wagner strain terms are increasingly significant and need to be included in the nonlinear analysis. This paper takes advantage of the merits of so-called “geometrically exact beam theory” and the weak form formulation of the differential equations of equilibrium in beam theory, and it develops consistent differential equations of equilibrium for the nonlinear elastic analysis of members curved in space with warping and Wagner effects. The application of the nonlinear differential equations of equilibrium to various problems is illustrated.

[1]  M. Crisfield.  A consistent co-rotational formulation for non-linear, three-dimensional, beam-elements , 1990 .

[2]  J. C. Simo,et al.  The role of non-linear theories in transient dynamic analysis of flexible structures , 1987 .

[3]  Gordan Jelenić,et al.  A kinematically exact space finite strain beam model - finite element formulation by generalized virtual work principle , 1995 .

[4]  A. K. Banerjee,et al.  Multi-Flexible Body Dynamics Capturing Motion-Induced Stiffness , 1991 .

[5]  N. S. Trahair,et al.  Out‐of‐Plane Strengths of Steel Beams , 1992 .

[6]  J. Argyris.  An excursion into large rotations , 1982 .

[7]  M. Crisfield,et al.  Objectivity of strain measures in the geometrically exact three-dimensional beam theory and its finite-element implementation , 1999, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[8]  T. R. Kane,et al.  Dynamics of a cantilever beam attached to a moving base , 1987 .

[9]  E. Reissner.  On finite deformations of space-curved beams , 1981 .

[10]  Yuhshi Fukumoto,et al.  Ultimate Load Behavior of Curved I-Beams , 1981 .

[11]  Mark A. Bradford,et al.  Non-linear analysis of thin-walled members of open cross-section , 1999 .

[12]  A. Ibrahimbegovic,et al.  Computational aspects of vector-like parametrization of three-dimensional finite rotations , 1995 .

[13]  N. S Trahair,et al.  Flexural-Torsional Buckling of Curved Members , 1975 .

[14]  Theodore V. Galambos,et al.  Nonuniform Torsion of Steel Beams in inelastic Range , 1969 .

[15]  N. S Trahair,et al.  FLEXURAL-TORSIONAL BUCKLING OF ARCHES , 1986 .

[16]  Mark A. Bradford,et al.  Elastic flexural-torsional buckling of continuously restrained arches , 2002 .

[17]  K. Bathe,et al.  Large displacement analysis of three‐dimensional beam structures , 1979 .

[18]  A. Love.  A treatise on the mathematical theory of elasticity , 1892 .

[19]  Nicholas S. Trahair,et al.  Nonlinear Elastic Behavior of I-Beams Curved in Plan , 1997 .

[20]  Jian-Xin Gu,et al.  Exact Tangent Stiffness for Imperfect Beam-Column Members , 2000 .

[21]  E. Dvorkin,et al.  On a non‐linear formulation for curved Timoshenko beam elements considering large displacement/rotation increments , 1988 .

[22]  J. C. Simo,et al.  A Geometrically-exact rod model incorporating shear and torsion-warping deformation , 1991 .

[23]  Mark A. Bradford,et al.  Effects of approximations in analyses of beams of open thin‐walled cross‐section—part II: 3‐D non‐linear behaviour , 2001 .

[24]  Yong-Lin Pi,et al.  Nonlinear Inelastic Analysis of Steel Beam‐Columns. I: Theory , 1994 .

[25]  Nicholas S. Trahair,et al.  Inelastic Torsion of Steel I-Beams , 1993 .

[26]  Nicholas S. Trahair,et al.  Prebuckling Deformations and Flexural-Torsional Buckling of Arches , 1995 .

[27]  R. P. Burn,et al.  Groups, a path to geometry , 1985 .

[28]  J. C. Simo,et al.  A three-dimensional finite-strain rod model. Part II: Computational aspects , 1986 .

[30]  Chai Hong Yoo,et al.  Analysis and Design of Curved Steel Bridges , 1988 .

[31]  V. Vlasov.  Thin-walled elastic beams , 1961 .

[32]  M. Iura,et al.  A consistent theory of finite stretches and finite rotations, in space-curved beams of arbitrary cross-section , 2001 .

[33]  S. Timoshenko.  Theory of Elastic Stability , 1936 .

[34]  E. Reissner,et al.  On One‐Dimensional Large‐Displacement Finite‐Strain Beam Theory , 1973 .

[35]  D. J. Dawe,et al.  Finite element applications to thin-walled structures , 1991 .

[36]  Joan Lasenby,et al.  Simo-Vu Quoc rods using Clifford algebra , 1999 .