The PVDF-HFP gel polymer electrolyte for Li-O2 battery
暂无分享,去创建一个
Xin-bo Zhang | Yu Zhang | Kai Chen | Tongfa Liu | Z. Chang | Yan‐bin Yin
[1] Yue Yu,et al. In Situ Construction of Stable Tissue‐Directed/Reinforced Bifunctional Separator/Protection Film on Lithium Anode for Lithium–Oxygen Batteries , 2017, Advanced materials.
[2] Ping He,et al. Status and prospects of polymer electrolytes for solid-state Li–O2 (air) batteries , 2017 .
[3] Arumugam Manthiram,et al. Lithium battery chemistries enabled by solid-state electrolytes , 2017 .
[4] B. Scrosati,et al. Challenges and prospects of the role of solid electrolytes in the revitalization of lithium metal batteries , 2016 .
[5] Xin-bo Zhang,et al. Cathode Surface‐Induced, Solvation‐Mediated, Micrometer‐Sized Li2O2 Cycling for Li–O2 Batteries , 2016, Advanced materials.
[6] Yu Zhang,et al. A Flexible and Wearable Lithium–Oxygen Battery with Record Energy Density achieved by the Interlaced Architecture inspired by Bamboo Slips , 2016, Advanced materials.
[7] Jun Lu,et al. Anion-redox nanolithia cathodes for Li-ion batteries , 2016, Nature Energy.
[8] Xin-bo Zhang,et al. Cable-Type Water-Survivable Flexible Li-O2 Battery. , 2016, Small.
[9] Xueliang Sun,et al. From Lithium‐Oxygen to Lithium‐Air Batteries: Challenges and Opportunities , 2016 .
[10] Huisheng Peng,et al. High-Performance Lithium-Air Battery with a Coaxial-Fiber Architecture. , 2016, Angewandte Chemie.
[11] Peter Lamp,et al. Inorganic Solid-State Electrolytes for Lithium Batteries: Mechanisms and Properties Governing Ion Conduction. , 2015, Chemical reviews.
[12] Dan Xu,et al. Flexible and Foldable Li–O2 Battery Based on Paper‐Ink Cathode , 2015, Advanced materials.
[13] Katja Kretschmer,et al. Enhancement of stability for lithium oxygen batteries by employing electrolytes gelled by poly(vinylidene fluoride-co-hexafluoropropylene) and tetraethylene glycol dimethyl ether , 2015 .
[14] Xin-bo Zhang,et al. Recent Progress on Stability Enhancement for Cathode in Rechargeable Non‐Aqueous Lithium‐Oxygen Battery , 2015 .
[15] S. Liao,et al. A novel stability-enhanced lithium-oxygen battery with cellulose-based composite polymer gel as the electrolyte , 2015 .
[16] Xin-bo Zhang,et al. Artificial Protection Film on Lithium Metal Anode toward Long‐Cycle‐Life Lithium–Oxygen Batteries , 2015, Advanced materials.
[17] Dan Xu,et al. Flexible lithium–oxygen battery based on a recoverable cathode , 2015, Nature Communications.
[18] Stephen R. Forrest,et al. Transforming the cost of solar-to-electrical energy conversion: Integrating thin-film GaAs solar cells with non-tracking mini-concentrators , 2015, Light: Science & Applications.
[19] Yong-Mook Kang,et al. A hybrid gel-solid-state polymer electrolyte for long-life lithium oxygen batteries. , 2015, Chemical communications.
[20] Jonathon R. Harding,et al. Understanding the Chemical Stability of Polymers for Lithium–Air Batteries , 2015 .
[21] Dan Xu,et al. 3D ordered macroporous LaFeO3 as efficient electrocatalyst for Li–O2 batteries with enhanced rate capability and cyclic performance , 2014 .
[22] Jong‐Won Lee,et al. A quasi-solid-state rechargeable lithium-oxygen battery based on a gel polymer electrolyte with an ionic liquid. , 2014, Chemical communications.
[23] Zhifeng Ren,et al. Metallic nanostructures for light trapping in energy-harvesting devices , 2014, Light: Science & Applications.
[24] Z. Florjańczyk,et al. Lithium electrolytes based on modified imidazolium ionic liquids , 2014 .
[25] Wu Xu,et al. Stability of polymer binders in Li–O2 batteries , 2013 .
[26] Yong Zhang,et al. Biologically enhanced cathode design for improved capacity and cycle life for lithium-oxygen batteries , 2013, Nature Communications.
[27] Dan Xu,et al. Tailoring deposition and morphology of discharge products towards high-rate and long-life lithium-oxygen batteries , 2013, Nature Communications.
[28] Lili Liu,et al. Composite of a nonwoven fabric with poly(vinylidene fluoride) as a gel membrane of high safety for lithium ion battery , 2013 .
[29] Yuhui Chen,et al. Charging a Li-O₂ battery using a redox mediator. , 2013, Nature chemistry.
[30] B. Scrosati,et al. Composite poly(ethylene oxide) electrolytes plasticized by N-alkyl-N-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide for lithium batteries. , 2013, ChemSusChem.
[31] Xin-bo Zhang,et al. Synthesis of perovskite-based porous La(0.75)Sr(0.25)MnO3 nanotubes as a highly efficient electrocatalyst for rechargeable lithium-oxygen batteries. , 2013, Angewandte Chemie.
[32] John B Goodenough,et al. The Li-ion rechargeable battery: a perspective. , 2013, Journal of the American Chemical Society.
[33] Kristina Edström,et al. Ether Based Electrolyte, LiB(CN)4 Salt and Binder Degradation in the Li-O2 Battery Studied by Hard X-ray Photoelectron Spectroscopy (HAXPES) , 2012 .
[34] P. Bruce,et al. A Reversible and Higher-Rate Li-O2 Battery , 2012, Science.
[35] Hun‐Gi Jung,et al. An improved high-performance lithium-air battery. , 2012, Nature chemistry.
[36] Jean-Marie Tarascon,et al. Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.
[37] Xiaoyun Li,et al. In situ ceramic fillers of electrospun thermoplastic polyurethane/poly(vinylidene fluoride) based ge , 2011 .
[38] Kang Xu,et al. Reaction mechanisms for the limited reversibility of Li–O2 chemistry in organic carbonate electrolytes , 2011 .
[39] Akinori Kita,et al. Investigation of the Solid Electrolyte Interphase Formed by Fluoroethylene Carbonate on Si Electrodes , 2011 .
[40] P. Bruce,et al. Reactions in the rechargeable lithium-O2 battery with alkyl carbonate electrolytes. , 2011, Journal of the American Chemical Society.
[41] E. Quartarone,et al. Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives. , 2011, Chemical Society reviews.
[42] Jeffrey W. Fergus,et al. Ceramic and polymeric solid electrolytes for lithium-ion batteries , 2010 .
[43] B. McCloskey,et al. Lithium−Air Battery: Promise and Challenges , 2010 .
[44] Ruoshi Li,et al. Novel composite polymer electrolyte for lithium air batteries , 2010 .
[45] Jianling Li,et al. PVDF-HFP-based porous polymer electrolyte membranes for lithium-ion batteries , 2008 .
[46] Kang Li,et al. Preparation of porous PVDF hollow fibre membrane via a phase inversion method using lithium perchlorate (LiClO4) as an additive , 2005 .
[47] Yang‐Kook Sun,et al. Blended polymer electrolytes based on poly(lithium 4-styrene sulfonate) for the rechargeable lithium polymer batteries , 2004 .
[48] Ashok Kumar,et al. Ionic conduction in P(VDF-HFP)/PVDF–(PC + DEC)–LiClO4 polymer gel electrolytes , 2004 .
[49] Sung Won Choi,et al. An Electrospun Poly(vinylidene fluoride) Nanofibrous Membrane and Its Battery Applications , 2003 .
[50] A. Stephan,et al. Ionic conductivity and diffusion coefficient studies of PVdF–HFP polymer electrolytes prepared using phase inversion technique , 2002 .
[51] M. Armand,et al. Issues and challenges facing rechargeable lithium batteries , 2001, Nature.
[52] J. Tarascon,et al. Plastic PVDF-HFP electrolyte laminates prepared by a phase-inversion process , 2000 .
[53] Haitao Huang,et al. Novel Microporous Poly(vinylidene fluoride) Blend Electrolytes for Lithium‐Ion Batteries , 2000 .
[54] C. Wan,et al. Review of gel-type polymer electrolytes for lithium-ion batteries , 1999 .
[55] M. Dissanayake,et al. Ionic conductivity of plasticized(PEO)-LiCF3SO3 electrolytes , 1998 .
[56] Jean-Marie Tarascon,et al. Performance of Bellcore's plastic rechargeable Li-ion batteries , 1996 .
[57] K. M. Abraham,et al. A Polymer Electrolyte‐Based Rechargeable Lithium/Oxygen Battery , 1996 .
[58] Zhengyuan Tu,et al. 25th Anniversary Article: Polymer–Particle Composites: Phase Stability and Applications in Electrochemical Energy Storage , 2014, Advanced materials.
[59] G. Ranieri,et al. A study of stability of plasticized PEO electrolytes , 2002 .
[60] H. Wiemhöfer,et al. Electronic Supplementary Information Pvdf-hfp/ether-modified Polysiloxane Membranes Obtained via Airbrush Spraying as Active Separators for Application in Lithium Ion Batteries , 2022 .