A Generalized Feed-Forward Dynamic Adaptive Mesh Refinement and Derefinement Finite-Element Framework for Metal Laser Sintering—Part II: Nonlinear Thermal Simulations and Validations

[1]  Haijun Gong,et al.  Generation and detection of defects in metallic parts fabricated by selective laser melting and electron beam melting and their effects on mechanical properties. , 2013 .

[2]  D. Mynors,et al.  A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing , 2009 .

[3]  Xu Huang,et al.  Characterization and Prediction of Texture in Laser Annealed NiTi Shape Memory Thin Films , 2012 .

[4]  F. Klocke,et al.  Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[5]  Sanjay Kumar.  Selective laser sintering: A qualitative and objective approach , 2003 .

[6]  Michael F. Zäh,et al.  Investigations on residual stresses and deformations in selective laser melting , 2010, Prod. Eng..

[7]  K. Osakada,et al.  Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing , 2002 .

[8]  Wilhelm Meiners,et al.  Selective Laser Melting , 2012 .

[9]  Rémy Glardon,et al.  3D FE simulation for temperature evolution in the selective laser sintering process , 2004 .

[10]  Gideon Levy,et al.  RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING (LM) TECHNOLOGIES, STATE OF THE ART AND FUTURE PERSPECTIVES , 2003 .

[11]  Tom Craeghs,et al.  A pragmatic model for selective laser melting with evaporation , 2009 .

[12]  B. Stucker,et al.  A Generalized Feed Forward Dynamic Adaptive Mesh Refinement and Derefinement Finite Element Framework for Metal Laser Sintering—Part I: Formulation and Algorithm Development , 2015 .

[13]  Rémy Glardon,et al.  Sintering of commercially pure titanium powder with a Nd:YAG laser source , 2003 .

[14]  B. Stucker,et al.  Comparison of 3DSIM thermal modelling of selective laser melting using new dynamic meshing method to ANSYS , 2015 .

[15]  Richard M. Everson,et al.  Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting , 2013 .

[16]  G. Satoh,et al.  Beneficial Interface Geometry for Laser Joining of NiTi to Stainless Steel Wires , 2013 .

[17]  Hongliang Wang,et al.  Femtosecond Laser-Induced Simultaneous Surface Texturing and Crystallization of a-Si:H Thin Film: Absorption and Crystallinity , 2012 .

[18]  L. Froyen,et al.  Lasers and materials in selective laser sintering , 2002 .

[19]  Baldev Raj,et al.  Studies on laser sintering of mechanically alloyed Al50Ti40Si10 composite , 2009 .

[20]  Rémy Glardon,et al.  Influence of Nd : YAG parameters on the selective laser sintering of metallic powders , 2001 .

[21]  Yuwen Zhang,et al.  Laser sintering of metal powders on top of sintered layers under multiple-line laser scanning , 2007 .

[22]  Abdolreza Simchi,et al.  Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features , 2006 .

[23]  J. Kruth,et al.  Benchmarking of different SLS/SLM processes as Rapid Manufacturing techniques , 2005 .

[24]  T. Childs,et al.  Selective laser sintering (melting) of stainless and tool steel powders: Experiments and modelling , 2005 .

[25]  L. Shaw,et al.  Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders , 2004 .

[26]  Jean-Pierre Kruth,et al.  Direct Selective Laser Sintering of Hard Metal Powders: Experimental Study and Simulation , 2002 .

[27]  K. Osakada,et al.  Finite element analysis of melting and solidifying processes in laser rapid prototyping of metallic powders , 1999 .

[28]  A. Belegundu,et al.  Introduction to Finite Elements in Engineering , 1990 .

[29]  Huade Tan,et al.  Laser Joining of Continuous Glass Fiber Composite Preforms , 2013 .

[30]  Andrey V. Gusarov,et al.  Mechanisms of selective laser sintering and heat transfer in Ti powder , 2003 .

[31]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .