Modal parameters of the human hand-arm using finite element and operational modal analysis

This study presents a finite element (FE) model of the human hand-arm system to derive natural frequencies and mode shapes. The FE model is calibrated by considering modal parameters obtained from experimental vibration analyzed by using operational modal analysis (OMA) and transmissibility. Modal and harmonic analyses of the FE model are performed for two boundary conditions. The first one considers fixed shoulder condition while the second one introduces the trunk in order to permit motion of the shoulder. The results show that the natural frequencies of the second model that permits shoulder motion are comparable with those determined from measurements. Especially, the natural frequency about 12 Hz, which is corresponding to the frequency of maximum weight in ISO-5349-1 (2001), is not present in the model with fixed shoulder condition, while it appears in the second model. The results of the present study suggest that improved finite element models of the human hand-arm system may reveal hand-arm injury mechanism, the understanding of which may assist in deriving appropriate frequency weightings for the assessment of different components of the hand-arm vibration syndrome.

[1]  Anne Marsden,et al.  International Organization for Standardization , 2014 .

[2]  Tohr Nilsson,et al.  Risk assessment of vibration exposure and white fingers among platers , 1989, International archives of occupational and environmental health.

[3]  Subhash Rakheja,et al.  Vibration transmissibility characteristics of the human hand–arm system under different postures, hand forces and excitation levels , 2010 .

[4]  K. Radermacher,et al.  Critical evaluation of known bone material properties to realize anisotropic FE-simulation of the proximal femur. , 2000, Journal of biomechanics.

[5]  Marc Thomas,et al.  Operational modal analysis by updating autoregressive model , 2011 .

[6]  R G Dong,et al.  Simulation of mechanical responses of fingertip to dynamic loading. , 2002, Medical engineering & physics.

[7]  Subhash Rakheja,et al.  Biomechanical models of the human hand-arm to simulate distributed biodynamic responses for different postures , 2012 .

[8]  J. P. Paul,et al.  In vivo human tendon mechanical properties , 1999, The Journal of physiology.

[9]  E. N. Angevine,et al.  Hand-arm vibration, part II: Vibration transmission characteristics of the hand and arm , 1977 .

[10]  R L Lieber,et al.  Tendon biomechanical properties enhance human wrist muscle specialization. , 1995, Journal of biomechanics.

[11]  Viet Hung Vu,et al.  Natural frequencies of the hand-arm system using finite element method , 2012 .

[12]  Subhash Rakheja,et al.  A method for analyzing absorbed power distribution in the hand and arm substructures when operating vibrating tools , 2008 .

[13]  Marc Thomas,et al.  Development of a new frequency weighting filter for the asessment of grinder exposure to wrist-transmitted vibration , 1998 .

[14]  Massimo Bovenzi,et al.  Exposure-response relationship in the hand-arm vibration syndrome: an overview of current epidemiology research , 1998, International archives of occupational and environmental health.

[15]  Subhash Rakheja,et al.  a Comparison of Biodynamic Models of the Human HAND-ARM System for Applications to Hand-Held Power Tools , 2002 .

[16]  T Nakagawa,et al.  Transmission of hand-arm vibration to the head. , 1986, Scandinavian journal of work, environment & health.

[17]  Subhash Rakheja,et al.  Influence of hand–arm posture on biodynamic response of the human hand–arm exposed to zh-axis vibration , 2006 .