Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

[1]  Chenghao Yang,et al.  Self-rising synthesis of Ni–SDC cermets as anodes for solid oxide fuel cells , 2010 .

[2]  Douglas G. Ivey,et al.  A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects , 2010 .

[3]  Zongping Shao,et al.  Comparative study of doped ceria thin-film electrolytes prepared by wet powder spraying with powder synthesized via two techniques , 2010 .

[4]  Zongping Shao,et al.  Effects of preparation methods on the oxygen nonstoichiometry, B-site cation valences and catalytic efficiency of perovskite La0.6Sr0.4Co0.2Fe0.8O3−δ , 2009 .

[5]  M. T. Colomer,et al.  Influence of the urea content on the YSZ hydrothermal synthesis under dilute conditions and its role as dispersant agent in the post-reaction medium , 2009 .

[6]  M. M. Souza,et al.  Influence of the synthesis method on the porosity, microstructure and electrical properties of La0.7Sr0.3MnO3 cathode materials , 2009 .

[7]  G. Caboche,et al.  Flash microwave synthesis and sintering of nanosized La0.75Sr0.25Cr0.93Ru0.07o3–δ for fuel cell application , 2009 .

[8]  M. Ding,et al.  Synthesis of BaCe0.8Sm0.1Gd0.1O3−δ electrolyte by a sol-combustion method , 2009 .

[9]  Zongping Shao,et al.  Low-temperature synthesis of La0.6Sr0.4Co0.2Fe0.8O3−δ perovskite powder via asymmetric sol–gel process and catalytic auto-combustion , 2009 .

[10]  R. Ruffo,et al.  Carbonate coprecipitation synthesis of Sr- and Mg-doped LaGaO3 , 2009 .

[11]  H. Abe,et al.  NiO/YSZ nanocomposite particles synthesized via co-precipitation method for electrochemically active Ni/YSZ anode , 2009 .

[12]  Zongping Shao,et al.  Progress in understanding and development of Ba0.5Sr0.5Co0.8Fe0.2O3−δ-based cathodes for intermediate-temperature solid-oxide fuel cells: A review , 2009 .

[13]  J. Mukhopadhyay,et al.  Combustion synthesis and characterization of LSCF-based materials as cathode of intermediate temperature solid oxide fuel cells , 2009 .

[14]  Chun-Liang Chang,et al.  Electrochemical and microstructure characteristics of Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) cathodes prepared by citrate precursor method for SOFCs , 2009 .

[15]  M. M. Souza,et al.  Effect of propellant on the combustion synthesized Sr-doped LaMnO3 powders , 2009 .

[16]  Zhe Zhao,et al.  Synthesis of La0.9Sr0.1Al0.85Mg0.1Co0.05O2.875 using a polymeric method , 2009 .

[17]  A. Boccaccini,et al.  Electrophoretic deposition of La0.6Sr0.4Co0.8Fe0.2O3−δ cathodes on Ce0.9Gd0.1O1.95 substrates for intermediate temperature solid oxide fuel cell (IT-SOFC) , 2009 .

[18]  F. Krebs.  Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .

[19]  J. Tartaj,et al.  Single-phase ceramics with La1−xSrxGa1−yMgyO3−δ composition from precursors obtained by mechanosynthesis , 2009 .

[20]  F. Aldinger,et al.  Synthesis and characterization of Sr- and Mg-doped Lanthanum gallate electrolyte materials prepared via the Pechini method , 2009 .

[21]  Raymond J. Gorte,et al.  High‐Performance SOFC Cathodes Prepared by Infiltration , 2009 .

[22]  Zongping Shao,et al.  Facile auto-combustion synthesis for oxygen separation membrane application , 2009 .

[23]  Yen‐Pei Fu.  Ionic conductivity and mechanical properties of Y2O3-doped CeO2 ceramics synthesis by microwave-induced combustion , 2009 .

[24]  A. K. Tyagi,et al.  Synthesis of nanocrystalline Gd doped ceria by combustion technique , 2009 .

[25]  Mahesh Kumar,et al.  Synthesis of pure and Sr-doped LaGaO3, LaFeO3 and LaCoO3 and Sr,Mg-doped LaGaO3 for ITSOFC application using different wet chemical routes , 2009 .

[26]  Zongping Shao,et al.  A new symmetric solid-oxide fuel cell with La0.8Sr0.2Sc0.2Mn0.8O3-δ perovskite oxide as both the anode and cathode , 2009 .

[27]  Hongfei Lin,et al.  Synthesis of NiO–Ce0.9Gd0.1O1.95 nanocomposite powders for low-temperature solid oxide fuel cell anodes by co-precipitation , 2009 .

[28]  G. Marcì,et al.  Citrate-nitrate auto-combustion synthesis of perovskite-type nanopowders: A systematic approach , 2009 .

[29]  S. Hyun,et al.  Interlayer-free nanostructured La0.58Sr0.4Co0.2 Fe0.8O3−δ cathode on scandium stabilized zirconia electrolyte for intermediate-temperature solid oxide fuel cells , 2009 .

[30]  Jian Xin Wang,et al.  Synthesis and properties of (La0.75Sr0.25)0.95MnO3±δ nano-powder prepared via Pechini route , 2009 .

[31]  Zongping Shao,et al.  Characterization and optimization of La0.8Sr0.2Sc0.1Mn0.9O3−δ-based composite electrodes for intermediate-temperature solid-oxide fuel cells , 2008 .

[32]  A. Caneiro,et al.  High performance nanostructured IT-SOFC cathodes prepared by novel chemical method , 2008 .

[33]  Yongsong Xie,et al.  Enhancement of Solid Oxide Fuel Cell Performance by La0.6Sr0.4Co0.2Fe0.8O3 − δ Double-Layer Cathode , 2008 .

[34]  Chun-Liang Chang,et al.  Microstructure and Electrochemical Characterization of Sm0.5Sr0.5CoO3 Films as SOFC Cathode Prepared by the Electrostatic‐Assisted Ultrasonic Spray Pyrolysis Method , 2008 .

[35]  R. Gerbasi,et al.  High conductivity and chemical stability of BaCe1−x−yZrxYyO3−δ proton conductors prepared by a sol–gel method , 2008 .

[36]  S. Jiang,et al.  Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review , 2008 .

[37]  D. K. Kim,et al.  Electrical Conductivity of Submicrometer Gadolinia‐Doped Ceria Sintered at 1000°C Using Precipitation‐Synthesized Nanocrystalline Powders , 2008 .

[38]  P. Möller,et al.  Development of porous cathode powders for SOFC and influence of cathode structure on the oxygen electroreduction kinetics , 2008 .

[39]  M. Khaleel,et al.  Fabrication of gradient porous LSM cathode by optimizing deposition parameters in ultrasonic spray pyrolysis , 2008 .

[40]  Wei Zhou,et al.  Fabrication of an anode-supported yttria-stabilized zirconia thin film for solid-oxide fuel cells via wet powder spraying , 2008 .

[41]  Vladislav V. Kharton,et al.  Electrode materials and reaction mechanisms in solid oxide fuel cells: a brief review , 2008 .

[42]  Zongping Shao,et al.  Synthesis and assessment of La0.8Sr0.2ScyMn1−yO3−δ as cathodes for solid-oxide fuel cells on scandium-stabilized zirconia electrolyte , 2008 .

[43]  D. Brett,et al.  Intermediate temperature solid oxide fuel cells. , 2008, Chemical Society reviews.

[44]  Vladislav V. Kharton,et al.  Electrode materials and reaction mechanisms in solid oxide fuel cells: a brief review , 2008 .

[45]  R. O. Fuentes,et al.  Synthesis and properties of Gadolinium-doped ceria solid solutions for IT-SOFC electrolytes , 2008 .

[46]  R. Tetean,et al.  NiO/YSZ nanoparticles obtained by new sol–gel route , 2008 .

[47]  Lucun Guo,et al.  Synthesis and characterization of doped LaCrO3 perovskite prepared by EDTA–citrate complexing method , 2008 .

[48]  P. Kosinski,et al.  Obtaining YSZ nanoparticles by the sol–gel method with sucrose and pectin as organic precursors , 2008 .

[49]  S. Dharwadkar,et al.  LaCrO3 powder from lanthanum trisoxalatochromate(III) (LTCR) precursor , 2008 .

[50]  A. Feldhoff,et al.  The sol–gel synthesis of perovskites by an EDTA/citrate complexing method involves nanoscale solid state reactions , 2008 .

[51]  Zongping Shao,et al.  Electrochemical performance of silver-modified Ba0.5Sr0.5Co0.8Fe0.2O3-δ cathodes prepared via electroless deposition , 2008 .

[52]  A. Vik,et al.  Effect of calcination conditions and precursor proportions on the properties of YSZ nanoparticles obtained by modified sol–gel route , 2008 .

[53]  Chun-Liang Chang,et al.  Unique porous thick Sm0.5Sr0.5CoO3 solid oxide fuel cell cathode films prepared by spray pyrolysis , 2008 .

[54]  Yue Zhang,et al.  Ba0.5Sr0.5Co0.8Fe0.2O3 nanopowders prepared by glycine–nitrate process for solid oxide fuel cell cathode , 2008 .

[55]  S. Jiang,et al.  Synthesis of LaCoO3 nano-powders by aqueous gel-casting for intermediate temperature solid oxide fuel cells , 2008 .

[56]  Zongping Shao,et al.  LSCF Nanopowder from Cellulose–Glycine‐Nitrate Process and its Application in Intermediate‐Temperature Solid‐Oxide Fuel Cells , 2008 .

[57]  Guillermo Santana,et al.  Nanostructured YSZ thin films for solid oxide fuel cells deposited by ultrasonic spray pyrolysis , 2008 .

[58]  Ravi Gupta,et al.  Effects of solvent and chelating agent on synthesis of solid oxide fuel cell perovskite, La0.8Sr0.2CrO3−δ , 2008 .

[59]  L. Gauckler,et al.  Microstructure and electrical conductivity of nanocrystalline nickel-and nickel oxide/gadolinia-doped ceria thin films , 2008 .

[60]  K. S. Park,et al.  Sr- and Mg-doped LaGaO3 powder synthesis by carbonate coprecipitation , 2008 .

[61]  F. Boey,et al.  Progress in synthesis of ferroelectric ceramic materials via high-energy mechanochemical technique , 2008 .

[62]  B. Hwang,et al.  Formation of Ce0.8Sm0.2O1.9 nanoparticles by urea-based low-temperature hydrothermal process , 2008 .

[63]  D. Dong,et al.  Preparation of Pr0.35Nd0.35Sr0.3MnO3−δ/YSZ composite cathode powders for tubular solid oxide fuel cells by microwave-induced monomer gelation and gel combustion synthesis process , 2008 .

[64]  Zhenguo Yang,et al.  Recent advances in metallic interconnects for solid oxide fuel cells , 2008 .

[65]  Yen‐Pei Fu,et al.  Preparation and Characterization of Samaria‐Doped Ceria Electrolyte Materials for Solid Oxide Fuel Cells , 2007 .

[66]  B. Hwang,et al.  Microstructure and Properties of the Ni–CGO Composite Anodes Prepared by the Electrostatic‐Assisted Ultrasonic Spray Pyrolysis Method , 2007 .

[67]  Zongping Shao,et al.  Significant impact of nitric acid treatment on the cathode performance of Ba0.5Sr0.5Co0.8Fe0.2O3−δ perovskite oxide via combined EDTA–citric complexing process , 2007 .

[68]  T. Inagaki,et al.  Synthesis of matrix-type NiO-SDC composite particles by spray pyrolysis with acid addition for development of SOFC cermet anode , 2007 .

[69]  John B. Goodenough,et al.  Alternative anode materials for solid oxide fuel cells , 2007 .

[70]  L. Gauckler,et al.  Thin films for micro solid oxide fuel cells , 2007 .

[71]  Radenka Maric,et al.  A brief review of the ionic conductivity enhancement for selected oxide electrolytes , 2007 .

[72]  Zongping Shao,et al.  Anode-supported ScSZ-electrolyte SOFC with whole cell materials from combined EDTA–citrate complexing synthesis process , 2007 .

[73]  U. Stimming,et al.  Recent anode advances in solid oxide fuel cells , 2007 .

[74]  H. Hwang,et al.  Electrochemical performance of Ba0.5Sr0.5CoxFe1−xO3−δ (x = 0.2–0.8) cathode on a ScSZ electrolyte for intermediate temperature SOFCs , 2007 .

[75]  B. Hwang,et al.  Deposition of Ni-CGO composite anodes by electrostatic assisted ultrasonic spray pyrolysis method , 2007 .

[76]  A. Feldhoff,et al.  How (Ba0.5Sr0.5)(Fe0.8Zn0.2)O3–δ and (Ba0.5Sr0.5)(Co0.8Fe0.2)O3–δ Perovskites Form via an EDTA/Citric Acid Complexing Method , 2007 .

[77]  A. Jacobson,et al.  Solid Solution Precursors to Gadolinia-Doped Ceria Prepared via a Low-Temperature Solution Route , 2007 .

[78]  Zhenwei Wang,et al.  Thermal plasma spraying for SOFCs: Applications, potential advantages, and challenges , 2007 .

[79]  P. Gasser,et al.  Crystallization of amorphous ceria solid solutions , 2007 .

[80]  Christopher S. Johnson,et al.  Sulfur-tolerant anode materials for solid oxide fuel cell application , 2007 .

[81]  Dimitris Sarantaridis,et al.  Redox Cycling of Ni‐Based Solid Oxide Fuel Cell Anodes: A Review , 2007 .

[82]  T. Inagaki,et al.  Direct Internal Steam Reforming at SOFC Anodes Composed of NiO – SDC Composite Particles , 2007 .

[83]  F. Aldinger,et al.  Synthesis and microstructural characterization of Sr- and Mg-substituted LaGaO3 solid electrolyte , 2007 .

[84]  T. Inagaki,et al.  Preparation of Matrix‐Type Nickel Oxide/Samarium‐Doped Ceria Composite Particles by Spray Pyrolysis , 2007 .

[85]  A. Subramania,et al.  Synthesis of nano-crystalline (Ba0.5Sr0.5)Co0.8Fe0.2O3−δ cathode material by a novel sol–gel thermolysis process for IT-SOFCs , 2007 .

[86]  Ludwig J. Gauckler,et al.  Electrochemical performance of LSCF based thin film cathodes prepared by spray pyrolysis , 2007 .

[87]  H. Deguchi,et al.  Study on pyrolysing behavior of NiO-SDC composite particles prepared by spray pyrolysis technique , 2007 .

[88]  G. Meng,et al.  Electrochemical performance of a solid oxide fuel cell based on Ce0.8Sm0.2O2−δ electrolyte synthesized by a polymer assisted combustion method , 2007 .

[89]  Ataullah Khan,et al.  Synthesis of monophasic Ce0.5Zr0.5O2 solid solution by microwave-induced combustion method , 2007 .

[90]  L. Gauckler,et al.  Chemical Analysis of Spray Pyrolysis Gadolinia-Doped Ceria Electrolyte Thin Films for Solid Oxide Fuel Cells , 2007 .

[91]  Francisco M. S. Garrido,et al.  PILHAS A COMBUSTÍVEL DE ÓXIDO SÓLIDO: MATERIAIS, COMPONENTES E CONFIGURAÇÕES , 2007 .

[92]  L. Huerta,et al.  Structure, composition and electrical properties of YSZ films deposited by ultrasonic spray pyrolysis , 2007 .

[93]  Takashi Hibino,et al.  Recent advances in single-chamber solid oxide fuel cells: A review , 2007 .

[94]  Zongping Shao,et al.  Synthesis of nanocrystalline conducting composite oxides based on a non-ion selective combined complexing process for functional applications , 2006 .

[95]  Jianzhong Xiao,et al.  A Microwave-induced Solution-polymerization Synthesis of Doped LaGaO3 Powders , 2006 .

[96]  C. Suciu,et al.  Sol–gel production of zirconia nanoparticles with a new organic precursor , 2006 .

[97]  D. Peck,et al.  Properties of Cu, Ni, and V doped-LaCrO 3 interconnect materials prepared by pechini, ultrasonic spray pyrolysis and glycine nitrate processes for SOFC , 2006 .

[98]  Sun Juncai,et al.  Electrical Properties and Microwave Synthesis of Mixed Rare Earth Oxide Ln0.7Sr0.3-x Cax Co0.9Fe0.1 O3-δ , 2006 .

[99]  T. Inagaki,et al.  Studies on synthetic conditions of spray pyrolysis by acids addition for development of highly active Ni-SDC cermet anode , 2006 .

[100]  Yaohui Zhang,et al.  Synthesis and characteristics of nanocrystalline YSZ by homogeneous precipitation and its electrical properties , 2006 .

[101]  G. Meng,et al.  Polyvinyl alcohol-induced low temperature synthesis of CeO2-based powders , 2006 .

[102]  P. Fornasiero,et al.  Influence of synthesis route on morphology and electrical properties of LaNi0.6Fe0.4O3 , 2006 .

[103]  J. Fergus.  Electrolytes for solid oxide fuel cells , 2006 .

[104]  H. S. Maiti,et al.  Effect of metal ion concentration on synthesis and properties of La0.84Sr0.16MnO3 cathode material , 2006 .

[105]  D. Perednis,et al.  Influence of the process parameters on the ESD synthesis of thin film YSZ electrolytes , 2006 .

[106]  S. Chan,et al.  Preparation and properties of dense Ce0.9Gd0.1O2-δ ceramics for use as electrolytes in IT-SOFCs , 2006 .

[107]  K. Tay,et al.  Microwave-induced combustion synthesis and electrical properties of Ce1−xSmxO2−1/2x ceramics , 2006 .

[108]  G. Mascolo,et al.  Weakly-agglomerated nanocrystalline (ZrO2)0.9(Yb2O3)0.1 powders hydrothermally synthesized at low temperature , 2006 .

[109]  F. Ansart,et al.  Synthesis of Yttria Stabilized Zirconia by sol-gel route : Influence of experimental parameters and large scale production , 2006 .

[110]  S. Skinner,et al.  Solid oxide fuel cells - a challenge for materials chemists? , 2006 .

[111]  D. Perednis,et al.  Zirconia coatings deposited by electrostatic spray deposition. Influence of the process parameters , 2006 .

[112]  M. Belmonte,et al.  Advanced Ceramic Materials for High Temperature Applications , 2006 .

[113]  N. Bansal,et al.  Combustion synthesis of Sm0.5Sr0.5CoO3−x and La0.6Sr0.4CoO3−x nanopowders for solid oxide fuel cell cathodes , 2006 .

[114]  E. Djurado,et al.  ZrO2-based thin films synthesized by electrostatic spray deposition: Effect of post-deposition thermal treatments , 2006 .

[115]  Jeffrey W. Fergus,et al.  Oxide anode materials for solid oxide fuel cells , 2006 .

[116]  L. Gauckler,et al.  Spray pyrolysis of La0.6Sr0.4Co0.2Fe0.8O3-δ thin film cathodes , 2006 .

[117]  T. Inagaki,et al.  Effects of atomization conditions on morphology and SOFC anode performance of spray pyrolyzed NiO–Sm0.2Ce0.8O1.9 composite particles , 2006 .

[118]  F. Aldinger,et al.  Synthesis of La0.85Sr0.15Ga0.85Mg0.15O2.85 materials for SOFC applications by acrylamide polymerization , 2006 .

[119]  S. Jiang,et al.  A review of wet impregnation—An alternative method for the fabrication of high performance and nano-structured electrodes of solid oxide fuel cells , 2006 .

[120]  Catherine M. Grgicak,et al.  Control of microstructure, sinterability and performance in Co-precipitated NiYSZ, CuYSZ and CoYSZ SOFC anodes , 2006 .

[121]  G. Meng,et al.  Reactive Ce0.8Sm0.2O1.9 powder synthesized by carbonate coprecipitation: Sintering and electrical characteristics , 2006 .

[122]  A. Tyagi,et al.  Visit to the fascinating world of nano-ceramic powders via solution-combustion , 2006 .

[123]  W. Jin,et al.  Effect of pH on synthesis and properties of perovskite oxide via a citrate process , 2006 .

[124]  Rainer Waser,et al.  Electrical properties of the grain boundaries of oxygen ion conductors: Acceptor-doped zirconia and ceria , 2006 .

[125]  D. Lamas,et al.  Enhanced Ionic Conductivity in Nanostructured, Heavily Doped Ceria Ceramics , 2006 .

[126]  T. Inagaki,et al.  Synthesis and characterizations of composite particles for solid oxide fuel cell anodes by spray pyrolysis and intermediate temperature cell performance , 2005 .

[127]  Qingshan Zhu,et al.  Low temperature processing of dense nanocrystalline scandia-doped zirconia (ScSZ) ceramics , 2005 .

[128]  Catherine M. Grgicak,et al.  Synthesis and Characterization of NiO–YSZ Anode Materials: Precipitation, Calcination, and the Effects on Sintering , 2005 .

[129]  L. Mestres,et al.  Synthesis and electrical properties of new rare-earth titanium perovskites for SOFC anode applications , 2005 .

[130]  R. Holze,et al.  Electrode materials for lithium secondary batteries prepared by sol-gel methods , 2005 .

[131]  L. Pathak,et al.  A review on the synthesis of Y–Ba–Cu-oxide powder , 2005 .

[132]  Harumi Yokokawa,et al.  Electrolytes for Solid-Oxide Fuel Cells , 2005 .

[133]  J. Goodenough,et al.  LSGM-Based Solid Oxide Fuel Cell with 1.4 W/cm2 Power Density and 30 Day Long-Term Stability , 2005 .

[134]  Yarong Wang,et al.  Reactive 10 mol% RE2O3 (RE = Gd and Sm) doped CeO2 nanopowders: Synthesis, characterization, and low-temperature sintering into dense ceramics , 2005 .

[135]  S. Pratsinis,et al.  Electrospray and pressurized spray deposition of yttria-stabilized zirconia films , 2005 .

[136]  T. Graule,et al.  Ceramic Materials for Advanced Solid Oxide Fuel Cells , 2005 .

[137]  J. Fergus.  Metallic interconnects for solid oxide fuel cells , 2005 .

[138]  H. S. Maiti,et al.  A novel spray-pyrolysis technique to produce nanocrystalline lanthanum strontium manganite powder , 2005 .

[139]  Qingshan Zhu,et al.  Low temperature sintering of 8YSZ electrolyte film for intermediate temperature solid oxide fuel cells , 2005 .

[140]  Yen‐Pei Fu,et al.  Preparation of Y2O3-doped CeO2 nanopowders by microwave-induced combustion process , 2005 .

[141]  L. Gauckler,et al.  Thin Film Deposition Using Spray Pyrolysis , 2005 .

[142]  S. Nannarone,et al.  Synthesis and characterization of praseodymium-doped ceria powders by a microwave-assisted hydrothermal (MH) route , 2005 .

[143]  D. Perednis,et al.  Initial Stages in Zirconia Coatings Using ESD , 2005 .

[144]  J. Goodenough,et al.  Superior perovskite oxide-ion conductor; Strontium- and magnesium-doped LaGaO3 : III. Performance tests of single ceramic fuel cells , 2005 .

[145]  K. Hirota,et al.  Characterization and Sintering of Reactive Cerium(IV) Oxide Powders Prepared by the Hydrazine Method , 2005 .

[146]  John B. Goodenough,et al.  Superior Perovskite Oxide‐Ion Conductor; Strontium‐ and Magnesium‐Doped LaGaO3: I, Phase Relationships and Electrical Properties , 2005 .

[147]  W. R. Moser,et al.  Dense Perovskite, La1‐xA′xFe1‐yCoyO3‐δ (A′= Ba, Sr, Ca), Membrane Synthesis, Applications, and Characterization , 2005 .

[148]  M. A. Gülgün,et al.  Polymerized Organic-Inorganic Synthesis of Mixed Oxides , 2004 .

[149]  Sang‐Jin Lee,et al.  Preparation of Portland Cement Components by Poly(vinyl alcohol) Solution Polymerization , 2004 .

[150]  Meilin Liu,et al.  A simple and cost-effective approach to fabrication of dense ceramic membranes on porous substrates , 2004 .

[151]  Chunhua Yan,et al.  Hydrothermal Synthesis of Weakly Agglomerated Nanocrystalline Scandia‐Stabilized Zirconia , 2004 .

[152]  R. Simpson,et al.  Monolithic nickel(II)-based aerogels using an organic epoxide: the importance of the counterion , 2004 .

[153]  I. Kaus,et al.  Combustion Synthesis and Characterization of Nanocrystalline CeO2-Based Powders , 2004 .

[154]  Nguyen Q. Minh,et al.  Solid oxide fuel cell technology—features and applications , 2004 .

[155]  V. Kharton,et al.  Transport properties of solid oxide electrolyte ceramics: a brief review , 2004 .

[156]  L. Luo,et al.  Carbonate Co-precipitation of Gd2O3-doped CeO2 solid solution nano-particles , 2004 .

[157]  S. Adler.  Factors governing oxygen reduction in solid oxide fuel cell cathodes. , 2004, Chemical reviews.

[158]  Zongping Shao,et al.  A high-performance cathode for the next generation of solid-oxide fuel cells , 2004, Nature.

[159]  Song Chen,et al.  Gd3+ and Sm3+ co-doped ceria based electrolytes for intermediate temperature solid oxide fuel cells , 2004 .

[160]  K. Arai,et al.  Hydrothermal synthesis of zirconia nanocrystals in supercritical water , 2004 .

[161]  R. Gorte,et al.  Direct hydrocarbon solid oxide fuel cells. , 2004, Chemical reviews.

[162]  D. Chung,et al.  Microwave-induced combustion synthesis of Ce1−xSmxO2−x/2 powder and its characterization , 2004 .

[163]  F. Tietz,et al.  Microstructure and electrical conductivity of LaNi0.6Fe0.4O3 prepared by combustion synthesis routes , 2004 .

[164]  S. Jiang,et al.  A review of anode materials development in solid oxide fuel cells , 2004 .

[165]  J. Fergus.  Lanthanum chromite-based materials for solid oxide fuel cell interconnects , 2004 .

[166]  F. Ansart,et al.  Evaluation of a sol–gel process for the synthesis of La1−xSrxMnO3+δ cathodic multilayers for solid oxide fuel cells , 2004 .

[167]  K. Fung,et al.  Comparison of dissolution behavior and ionic conduction between Sr and/or Mg doped LaGaO3 and LaAlO3 , 2004 .

[168]  T. Mori,et al.  Low temperature processing of dense samarium-doped CeO2 ceramics: sintering and grain growth behaviors , 2004 .

[169]  E. Muccillo,et al.  Synthesis, sintering and impedance spectroscopy of 8 mol% yttria-doped ceria solid electrolyte , 2004 .

[170]  G. Meng,et al.  Synthesis and properties of Ni–SDC cermets for IT–SOFC anode by co-precipitation , 2004 .

[171]  L. Gauckler,et al.  Solid oxide fuel cells with electrolytes prepared via spray pyrolysis , 2004 .

[172]  C. Peng,et al.  Nitrate–citrate combustion synthesis and properties of Ce1−xCaxO2−x solid solutions , 2003 .

[173]  E. Muccillo,et al.  Physical and chemical properties of nanosized powders of gadolinia-doped ceria prepared by the cation complexation technique , 2003 .

[174]  K. Kreuer.  First published online as a Review in Advance on April 9, 2003 PROTON-CONDUCTING OXIDES , 2022 .

[175]  Nigel P. Brandon,et al.  Recent Advances in Materials for Fuel Cells , 2003 .

[176]  Mogens Bjerg Mogensen,et al.  Conversion of Hydrocarbons in Solid Oxide Fuel Cells , 2003 .

[177]  Juergen Fleig.  Solid Oxide Fuel Cell Cathodes: Polarization Mechanisms and Modeling of the Electrochemical Performance , 2003 .

[178]  Steven J. Visco,et al.  Supported Electrolyte Thin Film Synthesis of Solid Oxide Fuel Cells , 2003 .

[179]  H. Yokokawa.  Understanding Materials Compatibility , 2003 .

[180]  S. Haile.  Fuel cell materials and components , 2003 .

[181]  S. Jiang,et al.  Issues on development of (La,Sr)MnO3 cathode for solid oxide fuel cells , 2003 .

[182]  N. Kalaiselvi,et al.  Microwave-assisted synthesis of LiNiO2-a preliminary investigation , 2003 .

[183]  Vito Specchia,et al.  Combustion synthesis of perovskite-type catalysts for natural gas combustion , 2003 .

[184]  Z. Guo,et al.  Synthesis of YSZ nanocrystalline particles via the nitrate–citrate combustion route using diester phosphate (PE) as dispersant , 2003 .

[185]  M. Naito,et al.  Synthesis of NiO–YSZ composite particles for an electrode of solid oxide fuel cells by spray pyrolysis , 2003 .

[186]  J. Morante,et al.  Synthesis of nanocrystalline materials for SOFC applications by acrylamide polymerisation , 2003 .

[187]  S. Deevi,et al.  Development of interconnect materials for solid oxide fuel cells , 2003 .

[188]  S. Jiang,et al.  Effect of characteristics of Y2O3/ZrO2 powders on fabrication of anode-supported solid oxide fuel cells , 2003 .

[189]  T. Mathews,et al.  Microwave assisted synthesis of La1−xSrxCrO3 (x=0.05, 0.15 and 0.30) and their thermodynamic characterization by fluoride emf method , 2003 .

[190]  R. Mark Ormerod.  Solid oxide fuel cells. , 2003, Chemical Society reviews.

[191]  T. He,et al.  Single intermedium-temperature SOFC prepared by glycine–nitrate process , 2003 .

[192]  G. S. Métraux,et al.  Lanthanum strontium manganite/yttria-stabilized zirconia nanocomposites derived from a surfactant assisted, co-assembled mesoporous phase. , 2003, Journal of the American Chemical Society.

[193]  J. Tartaj,et al.  Synthesis, sintering and electrical properties of YNi0.33Mn0.67O3 perovskite prepared by a polymerized method , 2003 .

[194]  T. Mathews,et al.  Microwave assisted synthesis and sintering of La0.8Sr0.2Ga0.83Mg0.17O2.815 , 2003 .

[195]  K. J. Rao,et al.  Microwave preparation and sintering of industrially important perovskite oxides: LaMO3(M = Cr, Co, Ni) , 2003 .

[196]  Chunhua Yan,et al.  (ZrO2)0.85(REO1.5)0.15 (RE=Sc, Y) solid solutions prepared via three Pechini-type gel routes: 2—sintering and electrical properties , 2003 .

[197]  Chunhua Yan,et al.  (ZrO2)0.85(REO1.5)0.15 (RE=Sc, Y) solid solutions prepared via three Pechini-type gel routes: 1—gel formation and calcination behaviors , 2003 .

[198]  T. He,et al.  Synthesis and characterization of IT-electrolyte with perovskite structure La0.8Sr0.2Ga0.85Mg0.15O3−δ by glycine–nitrate combustion method , 2003 .

[199]  G. Meng,et al.  On the green density, sintering behavior and electrical property of tape cast Ce0.9Gd0.1O1.95 electrolyte films , 2002 .

[200]  C. Xia.  Microstructures, conductivities, and electrochemical properties of Ce0.9Gd0.1O2 and GDC–Ni anodes for low-temperature SOFCs , 2002 .

[201]  Xuan Cheng,et al.  Nitrate–citrate combustion synthesis and properties of Ce1−xSmxO2−x/2 solid solutions , 2002 .

[202]  G. Meng,et al.  Sintering and electrical properties of (CeO2)0.8(Sm2O3)0.1 powders prepared by glycine–nitrate process , 2002 .

[203]  G. Ozin,et al.  Practical solid oxide fuel cells with anodes derived from self-assembled mesoporous-NiO-YSZ. , 2002, Chemical communications.

[204]  A. Boudghene Stambouli,et al.  Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy , 2002 .

[205]  M. Bianchetti,et al.  Synthesis of nanocrystalline CeO_2–Y_2O_3 powders by a nitrate–glycine gel-combustion process , 2002 .

[206]  C. Ponton,et al.  Hydrothermal processing and characterisation of doped lanthanum chromite for use in SOFCs , 2002 .

[207]  M. Naito,et al.  Performance and stability of SOFC anode fabricated from NiO-YSZ composite particles , 2002 .

[208]  Haitao Huang,et al.  Ionic conductivity in the CeO2–Gd2O3 system (0.05≤Gd/Ce≤0.4) prepared by oxalate coprecipitation , 2002 .

[209]  R. Birringer,et al.  Low temperature processing of dense nanocrystalline yttrium-doped cerium oxide ceramics , 2002 .

[210]  M. Marinšek,et al.  Ni-YSZ cermet anodes prepared by citrate/nitrate combustion synthesis , 2002 .

[211]  M. Greenblatt,et al.  Hydrothermal synthesis and properties of Ce1−xGdxO2−δ solid solutions , 2002 .

[212]  Toru Inagaki,et al.  Performance of intermediate temperature solid oxide fuel cells with La(Sr)Ga(Mg)O3 electrolyte film , 2002 .

[213]  M. Audier,et al.  Synthesis and characterisation of La1−xMnO3±δ nanopowders prepared by acrylamide polymerisation , 2002 .

[214]  Changrong Xia,et al.  Low-temperature SOFCs based on Gd0.1Ce0.9O1.95 fabricated by dry pressing , 2001 .

[215]  A. K. Tyagi,et al.  Ultrafine ceria powders via glycine-nitrate combustion , 2001 .

[216]  B. Steele,et al.  Materials for fuel-cell technologies , 2001, Nature.

[217]  F. Aldinger,et al.  The effect of doping and processing conditions on properties of La1-xSrxGa1-yMgyO3-α , 2001 .

[218]  A. Douy.  Polyacrylamide gel: an efficient tool for easy synthesis of multicomponent oxide precursors of ceramics and glasses , 2001 .

[219]  J. Gong,et al.  Preparation of Ni/YSZ materials for SOFC anodes by buffer-solution method , 2001 .

[220]  G. Ozin,et al.  Mesoporous Nickel−Yttria−Zirconia Fuel Cell Materials , 2001 .

[221]  T. Mori,et al.  Reactive Ce0.8RE0.2O1.9 (RE = La, Nd, Sm, Gd, Dy, Y, Ho, Er, and Yb) Powders via Carbonate Coprecipitation. 2. Sintering , 2001 .

[222]  J.P.P. Huijsmans,et al.  Ceramics in solid oxide fuel cells , 2001 .

[223]  E. P. Murray,et al.  (La,Sr)MnO3–(Ce,Gd)O2−x composite cathodes for solid oxide fuel cells , 2001 .

[224]  S. Badwal.  Stability of solid oxide fuel cell components , 2001 .

[225]  Fanglin Chen,et al.  Reduced-Temperature Solid Oxide Fuel Cells Fabricated by Screen Printing , 2001 .

[226]  G. Meng,et al.  A novel route of synthesizing La1−xSrxCoO3 by microwave irradiation , 2001 .

[227]  Xin Guo,et al.  Grain Boundary Blocking Effect in Zirconia: A Schottky Barrier Analysis , 2001 .

[228]  J. H. Lee,et al.  Characterization and sintering of nanocrystalline CeO2 powders synthesized by a mimic alkoxide method , 2001 .

[229]  G. Ozin,et al.  Electroactive Mesoporous Yttria Stabilized Zirconia Containing Platinum or Nickel Oxide Nanoclusters: A New Class of Solid Oxide Fuel Cell Electrode Materials , 2001 .

[230]  F. Aldinger,et al.  Chemical Preparation of Pure and Strontium- and/or Magnesium-Doped Lanthanum Gallate Powders , 2000 .

[231]  D. Westphal,et al.  Ionic and electronic conduction in stoichiometric and sub-stoichiometric perovskites , 2000 .

[232]  Meilin Liu,et al.  Investigation of the mechanism of sol-gel formation in the Sr(NO_3)_2/citric acid/ethylene glycol system by solution state ^87 Sr nuclear magnetic resonance spectroscopy , 2000 .

[233]  F. Tietz,et al.  Evaluation of La–Sr–Co–Fe–O perovskites for solid oxide fuel cells and gas separation membranes , 2000 .

[234]  J. Gong,et al.  Enhancement of the ionic conductivity of mixed calcia/yttria stabilized zirconia , 2000 .

[235]  F. Tietz,et al.  Material properties of La0.8Sr0.2Ga0.9+xMg0.1O3−δ as a function of Ga content , 2000 .

[236]  B. Steele.  Materials for IT-SOFC stacks: 35 years R&D: the inevitability of gradualness? , 2000 .

[237]  S. Chan,et al.  Ionic conductivities, sintering temperatures and microstructures of bulk ceramic CeO2 doped with Y2O3 , 2000 .

[238]  G. Ozin,et al.  Self-Assembling Solid Oxide Fuel Cell Materials: Mesoporous Yttria-Zirconia and Metal-Yttria-Zirconia Solid Solutions , 2000 .

[239]  Zongping Shao,et al.  Investigation of the permeation behavior and stability of a Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxygen membrane , 2000 .

[240]  Sano,et al.  A low-operating-temperature solid oxide fuel cell in hydrocarbon-Air mixtures , 2000, Science.

[241]  R. J. Bell,et al.  Influence of synthesis route on the catalytic properties of La1−xSrxMnO3 , 2000 .

[242]  D. Perednis,et al.  Fabrication of thin electrolytes for second-generation solid oxide fuel cells , 2000 .

[243]  P. Odier,et al.  Gelation by Acrylamide, a Quasi‐Universal Medium for the Synthesis of Fine Oxide Powders for Electroceramic Applications , 2000 .

[244]  H. B. Wang,et al.  Deposition and characterization of YSZ thin films by aerosol-assisted CVD , 2000 .

[245]  Brian C. H. Steele,et al.  Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500°C , 2000 .

[246]  Toru Inagaki,et al.  High performance electrodes for reduced temperature solid oxide fuel cells with doped lanthanum gallate electrolyte: I. Ni–SDC cermet anode , 2000 .

[247]  R. Maric,et al.  Powder prepared by spray pyrolysis as an electrode material for solid oxide fuel cells , 2000 .

[248]  Ferri,et al.  Which surfactants reduce surface tension faster? A scaling argument for diffusion-controlled adsorption , 2000, Advances in colloid and interface science.

[249]  G. Mascolo,et al.  Hydrothermal synthesis of ZrO2–Y2O3 solid solutions at low temperature , 2000 .

[250]  G. Ozin,et al.  Mesoporous Yttria–Zirconia and Metal–Yttria–Zirconia Solid Solutions for Fuel Cells , 2000 .

[251]  John A. Kilner,et al.  Optimisation of composite cathodes for intermediate temperature SOFC applications , 1999 .

[252]  Toru Inagaki,et al.  Ni-SDC cermet anode for medium-temperature solid oxide fuel cell with lanthanum gallate electrolyte , 1999 .

[253]  S. Primdahl.  nickel/yttria-stabilised zirconia cermet anodes for solid oxide fuel cells , 1999 .

[254]  W. Hong,et al.  Sol-gel synthesis of yttria stabilized zirconia membranes through controlled hydrolysis of zirconium alkoxide , 1999 .

[255]  S. Pickering,et al.  Nanostructured cerium oxide: preparation and properties of weakly-agglomerated powders , 1999 .

[256]  James H. Adair,et al.  Low-Temperature Hydrothermal Synthesis of Yttrium-Doped Zirconia Powders , 1999 .

[257]  Sang‐Jin Lee,et al.  Synthesis of oxide powders by way of a polymeric steric entrapment precursor route , 1999 .

[258]  Mogens Bjerg Mogensen,et al.  Gas Diffusion Impedance in Characterization of Solid Oxide Fuel Cell Anodes , 1999 .

[259]  M. Kakihana,et al.  Synthesis and characteristics of complex multicomponent oxides prepared by polymer complex method , 1999 .

[260]  Jianlin Shi,et al.  Thermodynamics and Densification Kinetics in Solid-state Sintering of Ceramics , 1999 .

[261]  D. Antonelli.  Synthesis and Mechanistic Studies of Sulfated Meso‐ and Microporous Zirconias with Chelating Carboxylate Surfactants , 1999 .

[262]  B. Vaidhyanathan,et al.  Synthesis of inorganic solids using microwaves , 1999 .

[263]  W. Jaegermann,et al.  Enhanced specific grain boundary conductivity in nanocrystalline Y2O3-stabilized zirconia , 1999 .

[264]  Y. Matsuzaki,et al.  Growth of yttria stabilized zirconia thin films by metallo-organic, ultrasonic spray pyrolysis , 1999 .

[265]  Andreas Stein,et al.  Synthesis of highly ordered, three-dimensional, macroporous structures of amorphous or crystalline inorganic oxides, phosphates, and hybrid composites , 1999 .

[266]  H. Verweij.  NANOCRYSTALLINE AND NANOPOROUS CERAMICS , 1998 .

[267]  T. Ishihara,et al.  Oxygen surface exchange and diffusion in LaGaO3 based perovskite type oxides , 1998 .

[268]  Lúcio Angnes,et al.  Eletrodos fabricados por "silk-screen" , 1998 .

[269]  Otsubo.  Effect of Adsorption Affinity of Polymers on the Viscosity Behavior of Suspensions. , 1998, Journal of colloid and interface science.

[270]  N. Sammes,et al.  Characterisation of doped-lanthanum gallates by X-ray diffraction and Raman spectroscopy , 1998 .

[271]  S. Aruna,et al.  Combustion synthesis and properties of nanostructured ceria-zirconia solid solutions , 1998 .

[272]  G. Tompsett,et al.  Characterisation of (CeO2)0.8(GdO1.5)0.2 synthesised using various techniques , 1998 .

[273]  J. Ying,et al.  Amphiphilic Templating of Mesostructured Zirconium Oxide , 1998 .

[274]  S. Barnett,et al.  Oxygen transfer processes in (La,Sr)MnO3/Y2O3-stabilized ZrO2 cathodes: an impedance spectroscopy study , 1998 .

[275]  Mogens Bjerg Mogensen,et al.  Gas Conversion Impedance: A Test Geometry Effect in Characterization of Solid Oxide Fuel Cell Anodes , 1998 .

[276]  J. Herle,et al.  Oxalate coprecipitation of doped ceria powder for tape casting , 1998 .

[277]  J. Goodenough,et al.  Wet Chemical Synthesis of Sr- and Mg-Doped LaGaO3, a Perovskite-Type Oxide-Ion Conductor , 1998 .

[278]  N. H. Beltrán,et al.  Rapid thermal annealing of zirconia films deposited by spray pyrolysis , 1998 .

[279]  C. H. Byers,et al.  Nucleation and growth for synthesis of nanometric zirconia particles by forced hydrolysis , 1998 .

[280]  Jackie Y. Ying,et al.  Synthesis of microporous transition-metal-oxide molecular sieves by a supramolecular templating mechanism , 1997, Nature.

[281]  Mogens Bjerg Mogensen,et al.  Oxidation of hydrogen on Ni/yttria-stabilized zirconia cermet anodes , 1997 .

[282]  M. Greenblatt,et al.  Properties of sol-gel prepared Ce1-xSmxO2-x/2 solid electrolytes , 1997 .

[283]  H. Vesteghem,et al.  Zirconia coatings by spray pyrolysis , 1997 .

[284]  I. Chen,et al.  Sintering of Fine Oxide Powders: I, Microstructural Evolution , 1996 .

[285]  T. Ishihara,et al.  Oxide ion conductivity in doped Ga based perovskite type oxide , 1996 .

[286]  W. Maier,et al.  Oxygen ion conductivity of platinum‐impregnated stabilized zirconia in bulk and microporous materials , 1996 .

[287]  A. Petric,et al.  Superior Oxygen Ion Conductivity of Lanthanum Gallate Doped with Strontium and Magnesium , 1996 .

[288]  J. Goodenough,et al.  Sol‐Gel Synthesis of a New Oxide‐Ion Conductor Sr‐ and Mg‐Doped LaGaO3 Perovskite , 1996 .

[289]  Jackie Y. Ying,et al.  Synthesis of a Stable Hexagonally Packed Mesoporous Niobium Oxide Molecular Sieve Through a Novel Ligand‐Assisted Templating Mechanism , 1996 .

[290]  Meilin Liu,et al.  Preparation of La_1−zSr_zCo_1−yFe_yO_3−x thin films, membranes, and coatings on dense and porous substrates , 1995 .

[291]  K. Yamashita,et al.  Hydrothermal synthesis and low temperature conduction properties of substituted ceria ceramics , 1995 .

[292]  K. J. Rao,et al.  Use of microwaves for the synthesis and processing of materials , 1995 .

[293]  J. Goodenough,et al.  A Superior Oxide-Ion Electrolyte. , 1995 .

[294]  F. Berkel,et al.  Characterization of solid oxide fuel cell electrodes by impedance spectroscopy and I–V characteristics , 1994 .

[295]  H. S. Maiti,et al.  Preparation of La1-xSrxMnO3 (0≤x≤0.6) powder by autoignition of carboxylate-nitrate gels , 1994 .

[296]  Tatsumi Ishihara,et al.  Doped LaGaO3 Perovskite Type Oxide as a New Oxide Ionic Conductor , 1994 .

[297]  H. S. Maiti,et al.  Low-temperature synthesis of ultrafine La_0.84Sr_0.16MnO_3 powder by an autoignition process , 1994 .

[298]  E. Kelder,et al.  Low-temperature synthesis of thin films of YSZ and BaCeO3 using electrostatic spray pyrolysis (ESP) , 1994 .

[299]  G. Messing,et al.  Ceramic Powder Synthesis by Spray Pyrolysis , 1993 .

[300]  I. Chen,et al.  Reactive Cerium(IV) Oxide Powders by the Homogeneous Precipitation Method , 1993 .

[301]  N. Minh.  Ceramic Fuel Cells , 1993 .

[302]  J. B. Higgins,et al.  A new family of mesoporous molecular sieves prepared with liquid crystal templates , 1992 .

[303]  J. S. Beck,et al.  Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism , 1992, Nature.

[304]  Takanori Inoue,et al.  Electrical properties of ceria-based oxides and their application to solid oxide fuel cells , 1992 .

[305]  D. Michael P. Mingos,et al.  Applications of Microwave Dielectric Heating Effects to Synthetic Problems in Chemistry , 1991 .

[306]  Gregory J. Exarhos,et al.  Glycine-nitrate combustion synthesis of oxide ceramic powders , 1990 .

[307]  A. Heuer,et al.  Alcohol Interaction with Zirconia Powders , 1990 .

[308]  B. Rao,et al.  Scanning Transmission Electron Microscope Analysis of Solute Partitioning in a Partially Stabilized Zirconia , 1982 .

[309]  J. Partington.  Inorganic and Analytical Chemistry , 1964, Nature.

[310]  P. Schindler,et al.  Solubility constants of metal oxides, metal hydroxides and metal hydroxide salts in aqueous solution , 1963 .

[311]  J. H. Lee,et al.  Preparation of La0.75Sr0.25Cr0.5Mn0.5O3−δ fine powders by carbonate coprecipitation for solid oxide fuel cells , 2010 .

[312]  L. Gauckler,et al.  Solid-state dewetting of La0.6Sr0.4Co0.2Fe0.8O3±δ thin films during annealing , 2008 .

[313]  K. Fung,et al.  Synthesis of and densification of oxygen-conducting La0.8Sr0.2Ga0.8Mg0.2O2.8 nano powder prepared from a low temperature hydrothermal urea precipitation process , 2008 .

[314]  J. Maček,et al.  Synthesis of nickel oxide/zirconia powders via a modified Pechini method , 2007 .

[315]  R. Cloots,et al.  Synthesis of La0.9Sr0.1Ga0.8Mg0.2O2.85 by successive freeze-drying and self-ignition of a hydroxypropylmethyl cellulose solution , 2007 .

[316]  J. R. Jurado,et al.  Synthesis of ceria-based electrolyte nanometric powders by urea-combustion technique , 2007 .

[317]  Kongjun Zhu,et al.  Preparation of calcium doped LaCrO3 fine powders by hydrothermal method and its sintering , 2006 .

[318]  Qingwu Wei,et al.  Synthesis and properties of La0.7Sr0.3MnO3 cathode by gel combustion , 2006 .

[319]  Yarong Wang,et al.  Synthesis, characterization and sinterablity of 10 mol% Sm2O3-doped CeO2 nanopowders via carbonate precipitation , 2006 .

[320]  Feng-sheng Li,et al.  Combustion synthesis and characterization of nanocrystalline CeO2-based powders via ethylene glycol–nitrate process , 2006 .

[321]  F. Ansart,et al.  New chemical route based on sol–gel process for the synthesis of oxyapatite La9.33Si6O26 , 2006 .

[322]  H. Schindler,et al.  Characterization of perovskite powders for cathode and oxygen membranes made by different synthesis routes , 2005 .

[323]  G. Seisenbaeva,et al.  Design of molecular structure and synthetic approaches to single-source precursors in the sol-gel technology , 2005 .

[324]  A. Ortiz,et al.  Spray deposition and characterization of zirconium-oxide thin films , 2005 .

[325]  S. Dharwadkar,et al.  Synthesis of LaCoO3 from lanthanum trisoxalatocobaltate(III) (LTC) precursor employing microwave heating technique , 2004 .

[326]  S. Singhal,et al.  Advanced anodes for high-temperature fuel cells , 2004, Nature materials.

[327]  G. Mascolo,et al.  Zirconia-yttria (8 mol%) powders hydrothermally synthesized from different Y-based precursors , 2004 .

[328]  A. Navrotsky,et al.  Energetics of magnesium, strontium, and barium doped lanthanum gallate perovskites , 2004 .

[329]  R. Guo,et al.  Synthesis of NiO–ZrO2 powders for solid oxide fuel cells , 2003 .

[330]  Jeffry W. Stevenson,et al.  Development of lanthanum ferrite SOFC cathodes , 2003 .

[331]  B. Delmon,et al.  Characterization of CeO2-ZrO2 mixed oxides. Comparison of the citrate and sol-gel preparation methods , 2003 .

[332]  A. Rousset,et al.  Preparation and characterization of La1-xSrxMnO3+δ (0 ≤ x ≤ 0.6) powder by sol-gel processing , 2002 .

[333]  C. Monty,et al.  Hydrothermal synthesis of zirconia nanomaterials , 2001 .

[334]  Edward Lester,et al.  Continuous hydrothermal synthesis of inorganicmaterials in a near-critical water flow reactor; the one-step synthesisof nano-particulate Ce1 − xZrxO2(x = 0–1)solid solutions , 2001 .

[335]  R. Maric,et al.  High‐Performance Ni ‐SDC Cermet Anode for Solid Oxide Fuel Cells at Medium Operating Temperature , 1999 .

[336]  G. Meng,et al.  Hydrothermal synthesis and characterization of LaCrO3 , 1999 .

[337]  S. Ohara,et al.  Long‐Term Stability of Ni ‐ YSZ Anode with a New Microstructure Prepared from Composite Powder , 1999 .

[338]  E. Djurado,et al.  Second phases in doped lanthanum gallate perovskites , 1998 .

[339]  Yuan Chen,et al.  Amphoteric surfactant templating route for mesoporous zirconia , 1997 .

[340]  F. Babonneau,et al.  Sol-gel synthesis and NMR characterization of ceramics , 1997 .

[341]  J. Herle,et al.  Sintering behaviour and ionic conductivity of yttria-doped ceria , 1996 .

[342]  C. Reichardt.  Solvents and Solvent Effects in Organic Chemistry , 1988 .

[343]  K. C. Adiga,et al.  A new approach to thermochemical calculations of condensed fuel-oxidizer mixtures , 1981 .

[344]  John Burgess,et al.  Metal Ions in Solution , 1978 .

[345]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .

[346]  L. Eyring.  Progress in the science and technology of the rare earths , 1964 .

[347]  Arthur E. Martell,et al.  Stability constants of metal-ion complexes , 1964 .