An ultracompact 3×1 MMI power-combiner based on Si slot-waveguide structures

Abstract Today, photonic integrated circuits (PIC) that work with a high-modulation speed (100Gb/s and beyond) are required to use more optical power to overcome the losses. One solution is to use a high-level laser with a hundred milliwatts power. However, for a microchip circuit, this solution can be problematic due to the nonlinear effects and high cost. Therefore, to solve this issue, we propose a new design of a 3×1 multimode interference (MMI) power combiner based on a slot waveguide structure that can utilize slot-waveguide technology for reducing losses. In this study, the full-vectorial beam propagation method (FV-BPM) was used to find the optimal geometrical parameters of the MMI coupler, inputs/output taper, and the slot waveguide structure. Simulation results show that after light propagation of 9.82 μm the beam combiner efficiency can reach 97.6 % working within the C-band range. Also, to reduce back reflection losses an angled MMI was designed using a finite difference time domain (FDTD) method and results show a low back reflection of 40 dB. This unique design can lead to an efficient and compact combiner for multiple coherent sources that work with PIC chips.

[1]  Fengnian Xia,et al.  Compact Wavelength Multiplexers/Semultiplexers using Photonic Wires on Silicon-on-Insulator (SOI) Substrate , 2006, 2006 International Conference on Indium Phosphide and Related Materials Conference Proceedings.

[2]  Dror Malka,et al.  Design of novel SOI 1 × 4 optical power splitter using seven horizontally slotted waveguides , 2017 .

[3]  S. Matsuo,et al.  Experimental demonstration of 1×4 InP/InGaAsP optical integrated multimode interference waveguide switch , 2008, 2008 20th International Conference on Indium Phosphide and Related Materials.

[4]  T. Koike-Akino,et al.  Novel multimode interference devices for wavelength beam splitting/combining , 2015, 2015 International Conference on Photonics in Switching (PS).

[5]  J. Chrostowski,et al.  A full-vectorial beam propagation method for anisotropic waveguides , 1994 .

[6]  D. Malka,et al.  Modeling a $1 \times 8$ MMI Green Light Power Splitter Based on Gallium-Nitride Slot Waveguide Structure , 2018, IEEE Photonics Technology Letters.

[7]  S. Forrest,et al.  Compact polarization-insensitive InGaAsP-InP 2 × 2 optical switch , 2005, IEEE Photonics Technology Letters.

[8]  S. Selleri,et al.  Full-vector finite-element beam propagation method for anisotropic optical device analysis , 2000, IEEE Journal of Quantum Electronics.

[9]  P. Sahu.  An Ultra Compactmulti Mode Interference Coupler with Parabolic Down Tapered Geometry , 2013 .

[10]  D. Gonzalo.  Slot-waveguide Analysis and Fabrication of a Planar Dielectric Waveguide , 2014 .

[11]  Design of a 1×4 silicon wavelength demultiplexer based on multimode interference in a slot waveguide structures , 2014, 2014 IEEE 28th Convention of Electrical & Electronics Engineers in Israel (IEEEI).

[12]  Z. Zalevsky,et al.  A Photonic 1 × 4 Power Splitter Based on Multimode Interference in Silicon–Gallium-Nitride Slot Waveguide Structures , 2016, Materials.

[13]  Wei-Ping Huang,et al.  Design optimization of integrated BiDi triplexer optical filter based on planar lightwave circuit. , 2006, Optics express.

[14]  L. Vivien,et al.  Size influence on the propagation loss induced by sidewall roughness in ultrasmall SOI waveguides , 2004, IEEE Photonics Technology Letters.

[15]  Qianfan Xu,et al.  Guiding and confining light in void nanostructure. , 2004, Optics letters.

[16]  F. Kano,et al.  Low-voltage operation of 100-Gbit/s EADFB laser array module , 2010, 22nd IEEE International Semiconductor Laser Conference.

[17]  L. Coldren,et al.  High-Power Indium Phosphide Photonic Integrated Circuits , 2019, IEEE Journal of Selected Topics in Quantum Electronics.

[18]  Yicun Yao,et al.  Designing MMI structured beam-splitter in LiNbO3 crystal based on a combination of ion implantation and femtosecond laser ablation. , 2018, Optics express.

[19]  Dror Malka,et al.  An 8-Channel Wavelength MMI Demultiplexer in Slot Waveguide Structures , 2016, Materials.

[20]  Ji-jiang Wu.  A Multimode Interference Coupler with Exponentially Tapered Waveguide , 2008 .

[21]  R. van Roijen,et al.  Compact InP‐based ring lasers employing multimode interference couplers and combiners , 1994 .

[22]  David J. Moss,et al.  Nonlinear integrated photonics , 2018 .

[23]  Zeev Zalevsky,et al.  Design of a 1 × 4 silicon-alumina wavelength demultiplexer based on multimode interference in slot waveguide structures , 2015 .

[24]  Andrea Irace,et al.  All-silicon optical temperature sensor based on Multi-Mode Interference. , 2003, Optics express.

[25]  Qian Wang,et al.  Ultracompact Multimode Interference Coupler Designed by Parallel Particle Swarm Optimization With Parallel Finite-Difference Time-Domain , 2010, Journal of Lightwave Technology.

[26]  Xiang Wu,et al.  Splitting-on-demand optical power splitters using multimode interference (MMI) waveguide with programmed modulations , 2008 .

[27]  Mk Meint Smit,et al.  New all-passive 4x4 planar optical phase diversity network , 1991 .

[28]  T. Koike-Akino,et al.  An MMI-Based 4-Beam Combiner with Spline-Curved Index Step , 2015 .

[29]  E.C.M. Pennings,et al.  Optical multi-mode interference devices based on self-imaging: principles and applications , 1995 .

[30]  Emilio Gini,et al.  Polarization-insensitive low-voltage optical waveguide switch using InGaAsP/InP four-port Mach-Zehnder interferometer , 1993 .