All laser-based fabrication of optical elements

We report on an all-laser based fabrication process for optical elements made of glass. Two laser systems, namely a 1030 nm ultrashort pulsed and a CO2 laser are applied. Firstly, a femtosecond laser is used to precisely ablate the glass substrate layer-wise, forming the designed geometry. This ablation process is investigated in detail, focusing on the influence of the pulse distance as well as the laser fluence on the ablation depth, ablation efficiency and the surface roughness. It is found that the ablation depth decrease with increasing pulse distance while the ablation efficiency shows a maximum in the middle of the pulse distance regime for all investigated fluences. Contrary to these results, no significant influence on the surface roughness is observed. The well developed ultrashort pulsed laser ablation process is demonstrated for the fabrication of optical preforms such as cone-shaped (axicon), spherical and cylindrical lenses. In order to meet high surface quality requirements, inevitable stipulated for optical use, the surface roughness of the generated elements has to be reduced by CO2 laser polishing. To demonstrate the subsequent surface finishing process, a complex optic geometry i.e. an axicon array consisting of 37 individual axicons is fabricated within 23 minutes while the polishing shows a reduction of the surface roughness from 0.36 μm to 48 nm. For a detailed investigation of the fabricated optic, the axicon array is mounted into the ultrashort pulsed laser machine. Several sub-Bessel beams exhibiting the typical zeroth-order Bessel beam intensity distribution are observed, in turn confirming the applied manufacturing process to be well applicable for the fabrication of complex optic geometries. Cross-sections of the quasi-Bessel beam at the axicon in the middle of the array in both, x- and y-direction, show an almost identical intensity profile, indicating the high contour accuracy of the axicon. The diameter of the sub-beam is measured to be 9.5 μm (FWHM) and the Bessel range in propagation direction amounts to 8.0 mm (FWHM).

[1]  Wilson Sibbett,et al.  3D laser nano-printing on fibre paves the way for super-focusing of multimode laser radiation , 2018, Scientific Reports.

[2]  Reinhart Poprawe,et al.  Laser polishing and laser shape correction of optical glass , 2017 .

[3]  Tien-Li Chang,et al.  Surface forming on glass material by femtosecond laser modification with HF etching process , 2015 .

[4]  Carsten Reinhardt,et al.  Closely packed hexagonal conical microlens array fabricated by direct laser photopolymerization. , 2012, Applied optics.

[5]  Ralf Hellmann,et al.  Rapid fabrication of precise glass axicon arrays by an all laser-based manufacturing technology , 2020 .

[6]  Oto Brzobohatý,et al.  High quality quasi-Bessel beam generated by round-tip axicon. , 2008, Optics express.

[7]  Harold K. Haugen,et al.  Femtosecond laser micromachining of grooves in indium phosphide , 2004 .

[8]  Lawrence Shah,et al.  Femtosecond laser machining of multi-depth microchannel networks onto silicon , 2011 .

[9]  Alexey A. Wolf,et al.  High-speed and crack-free direct-writing of microchannels on glass by an IR femtosecond laser , 2016 .

[10]  E. Mazur,et al.  Femtosecond laser micromachining in transparent materials , 2008 .

[11]  Wenhao Huang,et al.  Micro lens fabrication by means of femtosecond two photon photopolymerization. , 2006, Optics express.

[12]  F P Meyer,et al.  Temperature dependence of the extinction coefficient of fused silica for CO(2) laser wavelengths. , 1987, Applied optics.

[13]  Olivier Pinel,et al.  Generation of high conical angle Bessel-Gauss beams with reflective axicons. , 2018, Applied optics.

[14]  Christophe Gorecki,et al.  Microfabrication of axicons by glass blowing at a wafer-level. , 2019, Optics letters.

[15]  A. Tünnermann,et al.  Femtosecond, picosecond and nanosecond laser ablation of solids , 1996 .

[16]  Denzel Bridges,et al.  Fabrication of embedded microball lens in PMMA with high repetition rate femtosecond fiber laser. , 2015, Optics express.

[17]  Simon Ameer-Beg,et al.  Femtosecond laser microstructuring of materials , 1998 .

[18]  Qing Yang,et al.  Maskless fabrication of concave microlens arrays on silica glasses by a femtosecond-laser-enhanced local wet etching method. , 2010, Optics express.

[19]  S. Nikumb,et al.  Femtosecond laser micromilling of Si wafers , 2008 .

[20]  Ralf Hellmann,et al.  Fabrication of a high-quality axicon by femtosecond laser ablation and CO2 laser polishing for quasi-Bessel beam generation. , 2018, Optics express.

[21]  Sohn Ik-Bu,et al.  Formation of Micro-lens Array using Femtosecond and CO2 lasers , 2016 .

[22]  Feng Chen,et al.  Fabrication of concave spherical microlenses on silicon by femtosecond laser irradiation and mixed acid etching. , 2014, Optics express.

[23]  Peng Liu,et al.  Effect of parameters on picosecond laser ablation of Cr12MoV cold work mold steel , 2017 .

[24]  Cheng-Hsiang Lin,et al.  Fabrication of microlens arrays in photosensitive glass by femtosecond laser direct writing , 2009 .

[25]  Ralf Hellmann,et al.  Influence of Pulse Duration on High-Precision Manufacturing of 3D Geometries , 2018, Journal of Laser Micro/Nanoengineering.

[26]  Koji Sugioka,et al.  Fabrication of 3D microoptical lenses in photosensitive glass using femtosecond laser micromachining , 2006 .

[27]  María Teresa Flores-Arias,et al.  Soda-lime glass microlens arrays fabricated by laser: Comparison between a nanosecond and a femtosecond IR pulsed laser , 2016 .

[28]  Perry,et al.  Laser-induced damage in dielectrics with nanosecond to subpicosecond pulses. , 1995, Physical review letters.