A Method for Flutter Detection by Infrared Imaging

The performance enhancement of aircraft coupled with the development of increasingly lightweight and flexible materials has led designers to use smaller structural safety factors along the time, which can make aerodynamic surfaces more susceptible to aeroelastic phenomena, including flutter. This kind of occurrence must be carefully investigated by ground and flight tests during aircraft development and certification, which requires suitable instrumentation in order to predict the occurrence of unwanted vibrations. The sensors in this kind of application must be less intrusive as possible, in order to not modify the dynamic or aerodynamic behavior of the system. This work proposes the use of infrared imaging as a tool for flutter detection, analyzing the suitability of the technique for this application. For this purpose, a literature review was performed by presenting infrared technology concepts; then, some preliminary tests were performed in a structure to predict flutter characteristics, and finally, wind tunnel tests were executed in the same structure, validating this technique and highlighting its positive points and points that need improvement.

[1]  Philipp Nadel.  Radiometric System Design , 2016 .

[2]  Roger Pinnington,et al.  Vibration testing, theory and practice , 1998 .

[3]  A. R. Collar,et al.  The Expanding Domain of Aeroelasticity , 1946, The Journal of the Royal Aeronautical Society.

[4]  J. W. G. van Nunen,et al.  AGARD Flight Test Instrumentation Series. Volume 9. Aeroelastic Flight Test Techniques and Instrumentation , 1979 .

[5]  Marty Brenner,et al.  Flight Test Evaluation of Flutter Prediction Methods , 2002 .

[7]  Michael W. Kehoe,et al.  A historical overview of flight flutter testing , 1995 .

[8]  Dewey H. Hodges,et al.  Introduction to Structural Dynamics and Aeroelasticity , 2002 .

[9]  Guilherme Ribeiro Benini,et al.  Modelo numérico para simulação da resposta aeroelástica de asas fixas. , 2002 .

[10]  Tiago Francisco Gomes da Costa,et al.  Estudo numérico de uma asa com controle ativo de flutter por realimentação da pressão medida num ponto , 2007 .

[11]  Grigorios Dimitriadis,et al.  On the use of control surface excitation in flutter testing , 2003 .

[12]  A. Sutherland.  A SMALL SCALE PITCH-PLUNGE FLUTTER MODEL FOR ACTIVE FLUTTER CONTROL RESEARCH , 2008 .

[13]  Gerald C. Holst,et al.  Electro-Optical Imaging System Performance , 1995 .

[14]  M. Earle,et al.  Infrared system engineering , 1971 .

[15]  G. M. Miller,et al.  Visualization of In-Flight Flow Phenomena Using Infrared Thermography , 2000 .

[16]  Roberto H. Tsunaki,et al.  Design of an experimental flutter mount system , 2007 .

[17]  Eduardo Morgado Belo,et al.  Modal Shape Analysis Using Thermal Imaging , 2015 .

[18]  Tobias Dehne,et al.  Dynamics of aircraft cabin ventilation studied by in-flight infrared thermography , 2012 .

[19]  Rick C. Lind.  A Presentation on Robust Flutter Margin Analysis and a Flutterometer , 1997 .

[20]  D Fisher,et al.  Flight Test Measurement Techniques for Laminar Flow. Volume 23(Les techniques de mesure en vol des ecoulements laminaires) , 2003 .

[21]  Afzal Suleman,et al.  Experimental Aeroelastic Response of Piezoelectric and Aileron Controlled 3D Wing , 2002 .

[22]  Rick Lind,et al.  Overview of Recent Flight Flutter Testing Research at NASA Dryden , 1997 .

[23]  Wayne M Olson,et al.  Aircraft Performance Flight Testing , 2000 .

[24]  Michimasa Fujino,et al.  Natural-Laminar-Flow Airfoil Development for a Lightweight Business Jet , 2003 .

[25]  H. Bothe,et al.  Introduction to Flight Test Engineering. , 1995 .

[26]  Robert E. McShea.  Test and Evaluation of Aircraft Avionics and Weapon Systems , 2010 .

[27]  Rick Lind,et al.  Comparison of Aeroelastic Excitation Mechanisms , 1998 .

[28]  Robert H. Scanlan,et al.  A Modern Course in Aeroelasticity , 1981, Solid Mechanics and Its Applications.