Effect of impurities on thermophysical properties and phase behaviour of a CO2-rich system in CCS

[1]  Khalil Kashefi,et al.  Measurement and modelling of interfacial tension and viscosity of reservoir fluids , 2012 .

[2]  Charles Eickhoff,et al.  Effect of Common Impurities on the Phase Behavior of Carbon-Dioxide-Rich Systems: Minimizing the Risk of Hydrate Formation and Two-Phase Flow , 2011 .

[3]  B. Tohidi,et al.  On the phase behaviour of the (carbon dioxide + water) systems at low temperatures: Experimental and modelling , 2011 .

[4]  B. Tohidi,et al.  Experimental and thermodynamic modelling of systems containing water and ethylene glycol: Application to flow assurance and gas processing , 2009 .

[5]  M. Mølnvik,et al.  Dynamis CO2 quality recommendations , 2008 .

[6]  B. Tohidi,et al.  Improving the Accuracy of Gas Hydrate Dissociation Point Measurements , 1999 .

[7]  G. Kontogeorgis,et al.  Multicomponent phase equilibrium calculations for water–methanol–alkane mixtures , 1999 .

[8]  W. Wakeham,et al.  The Viscosity of Carbon Dioxide , 1998 .

[9]  A. Fredenslund,et al.  Viscosity of Crude Oils , 1984 .

[10]  R. Reid,et al.  The Properties of Gases and Liquids , 1977 .

[11]  K. Gubbins,et al.  Corresponding states correlation for thermal conductivity of dense fluids , 1977 .

[12]  W. M. Haynes,et al.  Equations for the viscosity and thermal conductivity coefficients of methane , 1975 .

[13]  J. M. Prausnitz,et al.  Dissociation Pressures of Gas Hydrates Formed by Gas Mixtures , 1972 .

[14]  S. Saito,et al.  Hydrates at high pressures: Part I. Methane‐water, argon‐water, and nitrogen‐water systems , 1964 .