Thermal resistance analysis and optimization of photovoltaic-thermoelectric hybrid system

Abstract The thermal resistance theory is introduced into the theoretical model of the photovoltaic-thermoelectric (PV-TE) hybrid system. A detailed thermal resistance analysis is proposed to optimize the design of the coupled system in terms of optimal total conversion efficiency. Systems using four types of photovoltaic cells are investigated, including monocrystalline silicon photovoltaic cell, polycrystalline silicon photovoltaic cell, amorphous silicon photovoltaic cell and polymer photovoltaic cell. Three cooling methods, including natural cooling, forced air cooling and water cooling, are compared, which demonstrates a significant superiority of water cooling for the concentrating photovoltaic-thermoelectric hybrid system. Influences of the optical concentrating ratio and velocity of water are studied together and the optimal values are revealed. The impacts of the thermal resistances of the contact surface, TE generator and the upper heat loss thermal resistance on the property of the coupled system are investigated, respectively. The results indicate that amorphous silicon PV cell and polymer PV cell are more appropriate for the concentrating hybrid system. Enlarging the thermal resistance of the thermoelectric generator can significantly increase the performance of the coupled system using amorphous silicon PV cell or polymer PV cell.

[1]  K. K. Nielsen,et al.  The performance of a combined solar photovoltaic (PV) and thermoelectric generator (TEG) system , 2015, 1508.01344.

[2]  S. Said,et al.  A review on thermoelectric renewable energy: Principle parameters that affect their performance , 2014 .

[3]  Peng Li,et al.  Thermal design and management for performance optimization of solar thermoelectric generator , 2012 .

[4]  Wei Zhu,et al.  Enhanced performance of solar-driven photovoltaic-thermoelectric hybrid system in an integrated design , 2013 .

[5]  J. Nelson.  The physics of solar cells , 2003 .

[6]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[7]  W.G.J.H.M. van Sark,et al.  Feasibility of photovoltaic – Thermoelectric hybrid modules , 2011 .

[8]  Antonio Luque,et al.  Limiting efficiency of coupled thermal and photovoltaic converters , 1999 .

[9]  Lan Xiao,et al.  Performance analysis of photovoltaic–thermoelectric hybrid system with and without glass cover , 2015 .

[10]  Tianjun Liao,et al.  Performance analysis and load matching of a photovoltaic–thermoelectric hybrid system , 2015 .

[11]  J. Ji,et al.  Recent development and application of thermoelectric generator and cooler , 2015 .

[12]  Xiaolong Gou,et al.  Modeling, experimental study and optimization on low-temperature waste heat thermoelectric generator system , 2010 .

[13]  Bekir Sami Yilbas,et al.  The thermoelement as thermoelectric power generator: Effect of leg geometry on the efficiency and power generation , 2013 .

[14]  Wei Sun,et al.  Thermal analysis of a high concentration photovoltaic/thermal system , 2014 .

[15]  Shixue Wang,et al.  Theoretical analysis of a thermoelectric generator using exhaust gas of vehicles as heat source , 2013 .

[16]  Filippo Attivissimo,et al.  Feasibility of a Photovoltaic–Thermoelectric Generator: Performance Analysis and Simulation Results , 2015, IEEE Transactions on Instrumentation and Measurement.

[17]  Abraham Kribus,et al.  Analysis of Potential Conversion Efficiency of a Solar Hybrid System With High-Temperature Stage , 2006 .

[18]  Yimin Xuan,et al.  Role of surface recombination in affecting the efficiency of nanostructured thin-film solar cells. , 2013, Optics express.

[19]  Yao Wang,et al.  High-performance photovoltaic-thermoelectric hybrid power generation system with optimized thermal management , 2016 .

[20]  Nasrudin Abd Rahim,et al.  Progress in solar PV technology: Research and achievement , 2013 .

[21]  W. V. Sark,et al.  Enhancing solar cell efficiency by using spectral converters , 2005 .

[22]  Choongho Yu,et al.  Lossless hybridization between photovoltaic and thermoelectric devices , 2013, Scientific Reports.

[23]  Chang Chung Yang,et al.  Modeling and simulation for the design of thermal-concentrated solar thermoelectric generator , 2014 .

[24]  Wei-Hsin Chen,et al.  Experimental study on thermoelectric modules for power generation at various operating conditions , 2012 .

[25]  B. Ohara,et al.  Influence of electrical current variance and thermal resistances on optimum working conditions and geometry for thermoelectric energy harvesting , 2013 .

[26]  Yimin Xuan,et al.  Performance estimation of photovoltaic–thermoelectric hybrid systems , 2014 .

[27]  Antonio M. López,et al.  High-efficiency photovoltaic technology including thermoelectric generation , 2014 .

[28]  J. Whitelaw,et al.  Convective heat and mass transfer , 1966 .

[29]  Valentin D. Mihailetchi,et al.  Device model for the operation of polymer/fullerene bulk heterojunction solar cells , 2005 .

[30]  Keith A. Woodbury,et al.  Modeling and Analysis of a Combined Photovoltaic-Thermoelectric Power Generation System , 2012 .

[31]  Leroy S. Fletcher,et al.  Thermal Contact Conductance of Adhesives for Microelectronic Systems , 1997 .

[32]  Yuehong Su,et al.  Numerical investigation of heat pipe-based photovoltaic–thermoelectric generator (HP-PV/TEG) hybrid system , 2016 .

[33]  E. T. El Shenawy,et al.  Optimal operation of thermoelectric cooler driven by solar thermoelectric generator , 2006 .

[34]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[35]  Qiang Li,et al.  Design of a novel concentrating photovoltaic–thermoelectric system incorporated with phase change materials , 2016 .

[36]  Li Han,et al.  A novel high-performance photovoltaic–thermoelectric hybrid device , 2011 .