Comparative Evaluation of Advanced Three-Phase Three-Level Inverter/Converter Topologies Against Two-Level Systems

Efficient energy conversion in low-voltage applications has gained more attention due to increasing energy costs and environmental issues. Accordingly, three-level converters have been discussed as an alternative to the standard two-level voltage-source converter because they offer an increased efficiency at higher switching frequencies. From a system perspective, the benefits of using three-level converters are not only limited to the converter itself, but there are additional positive impacts on the surrounding such as on the load machine losses or on the electromagnetic interference input filter volume. In this paper, a holistic comparison of advanced three-level topologies against the two-level topology is given. Simple analytical calculations and measurements show the benefits and the optimization potential concerning several aspects, such as the necessary semiconductor chip area, the harmonic losses in the load machine and in filter components, and the volume of passive components.

[1]  Pertti Silventoinen,et al.  Active $du/dt$—New Output-Filtering Approach for Inverter-Fed Electric Drives , 2011, IEEE Transactions on Industrial Electronics.

[2]  Andrea Cavagnino,et al.  Estimation of Iron Losses in Induction Motors: Calculation Method, Results, and Analysis , 2010, IEEE Transactions on Industrial Electronics.

[3]  Lassi Aarniovuori,et al.  Measurements and Simulations of DTC Voltage Source Converter and Induction Motor Losses , 2012, IEEE Transactions on Industrial Electronics.

[4]  V. Peron-Guennegues,et al.  A converter topology for high current density drive applications , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[5]  T. Friedli,et al.  Analysis of the design space of single-stage and two-stage LC output filters of switched-mode AC power sources , 2012, 2012 IEEE Power and Energy Conference at Illinois.

[6]  B. J. Chalmers,et al.  Induction-motor losses due to nonsinusoidal supply waveforms , 1968 .

[7]  Hirofumi Akagi,et al.  A New Neutral-Point-Clamped PWM Inverter , 1981, IEEE Transactions on Industry Applications.

[8]  Andrea Cavagnino,et al.  Isolating the Impact of PWM Modulation on Motor Iron Losses , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[9]  Mariusz Malinowski,et al.  Comparison of 2.3-kV Medium-Voltage Multilevel Converters for Industrial Medium-Voltage Drives , 2007, IEEE Transactions on Industrial Electronics.

[10]  José R. Rodríguez,et al.  A Survey on Neutral-Point-Clamped Inverters , 2010, IEEE Transactions on Industrial Electronics.

[11]  Satoru Sone,et al.  Switching loss minimised space vector PWM method for IGBT three-level inverter , 1997 .

[12]  A. Ruderman,et al.  PWM power converter voltage quality bounds and their applicability to non-PWM control schemes , 2010, 2010 12th International Conference on Optimization of Electrical and Electronic Equipment.

[13]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[14]  A. Boglietti,et al.  No-load loss separation in induction motors operated by PWM inverters: Numerical and experimental approaches , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[15]  Andrew M. Knight,et al.  Performance of a High-Speed Motor Drive System Using a Novel Multilevel Inverter Topology , 2009 .

[16]  T.A. Lipo,et al.  High frequency modeling for cable and induction motor overvoltage studies in long cable drives , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[17]  A. Boglietti,et al.  Fast Method for the Iron Loss Prediction in Inverter-Fed Induction Motors , 2010, IEEE Transactions on Industry Applications.

[18]  Dushan Boroyevich,et al.  New feedforward space-vector PWM method to obtain balanced AC output voltages in a three-level neutral-point-clamped converter , 2002, IEEE Trans. Ind. Electron..

[19]  Johann W. Kolar,et al.  High efficiency drive system with 3-level T-type inverter , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[20]  Nobuyuki Matsui,et al.  PWM control and input characteristics of three-phase multi-level AC/DC converter , 1992, PESC '92 Record. 23rd Annual IEEE Power Electronics Specialists Conference.

[21]  Johann W. Kolar,et al.  Comparison of the chip area usage of 2-level and 3-level voltage source converter topologies , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

[22]  J. K. Steinke.  Grundlagen für die Entwicklung eines Steuerverfahrens für GTO-Dreipruktwechselrichter für Traktionsantriebe , 1988 .

[23]  T. Friedli,et al.  A Semiconductor Area Based Assessment of AC Motor Drive Converter Topologies , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[24]  J. Kolar,et al.  Influence of the modulation method on the conduction and switching losses of a PWM converter system , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[25]  A.M. Knight,et al.  Factors Affecting Losses in Induction Motors with Non-Sinusoidal Supply , 2007, 2007 IEEE Industry Applications Annual Meeting.

[26]  B. Fuld.  Aufwandsarmer Thyristor-Dreistufen-Wechsebrichter mit geringen Verlusten , 1989 .

[27]  Wenping Cao,et al.  Predicting Inverter-Induced Harmonic Loss by Improved Harmonic Injection , 2008, IEEE Transactions on Power Electronics.

[28]  Johann W. Kolar,et al.  Review of Three-Phase PWM AC–AC Converter Topologies , 2011, IEEE Transactions on Industrial Electronics.

[29]  S. Bernet,et al.  A comparison of three-level converters versus two-level converters for low-voltage drives, traction, and utility applications , 2005, IEEE Transactions on Industry Applications.

[30]  M. Schweizer,et al.  Comparison and implementation of a 3-level NPC voltage link back-to-back converter with SiC and Si diodes , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[31]  Steffen Bernet,et al.  The active NPC converter and its loss-balancing control , 2005, IEEE Transactions on Industrial Electronics.