Single point incremental forming: An assessment of the progress and technology trends from 2005 to 2015

The last decade has seen considerable interest in flexible forming processes. Among the upcoming flexible forming techniques, one that has captured a lot of interest is single point incremental forming (SPIF), where a flat sheet is incrementally deformed into a desired shape by the action of a tool that follows a defined toolpath conforming to the final part geometry. Research on SPIF in the last ten years has focused on defining the limits of this process, understanding the deformation mechanics and material behaviour and extending the process limits using various strategies. This paper captures the developments that have taken place over the last decade in academia and industry to highlight the current state of the art in this field. The use of different hardware platforms, forming mechanics, failure mechanism, estimation of forces, use of toolpath and tooling strategies, development of process planning tools, simulation of the process, aspects of sustainable manufacture and current and future applications are individually tracked to outline the current state of this process and provide a roadmap for future work on this process.

[1]  Maria Luisa Garcia-Romeu,et al.  Manufacturing of Polymeric Biocompatible Cranial Geometry by Single Point Incremental Forming , 2015 .

[2]  Joost Duflou,et al.  Forming Limit Predictions for the Serrated Strain Paths in Single Point Incremental Sheet Forming , 2007 .

[3]  Van Der Merwe Af,et al.  Incremental Sheet Forming (ISF) In The Manufacturing Of Titanium Based Plate Implants In The Bio-Medical Sector , 2012 .

[4]  J. Duflou,et al.  An investigation into thickness distribution in single point incremental forming using sequential limit analysis , 2014 .

[5]  Giuseppina Ambrogio,et al.  On the high-speed Single Point Incremental Forming of titanium alloys , 2013 .

[6]  Niels Bay,et al.  Multi Stage Strategies for Single Point Incremental Forming of a Cup , 2008 .

[7]  Bin Lu,et al.  Characterization of shape and dimensional accuracy of incrementally formed titanium sheet parts with intermediate curvatures between two feature types , 2016 .

[8]  Jian Cao,et al.  Analytical prediction of stepped feature generation in multi-pass single point incremental forming , 2012 .

[9]  N. Hayat,et al.  The effect of variation in the curvature of part on the formability in incremental forming: An experimental investigation , 2007 .

[10]  Imre Paniti.  Adaptation of Incremental Sheet Forming into cloud manufacturing , 2014 .

[11]  Joost R. Duflou,et al.  Force prediction for single point incremental forming deduced from experimental and FEM observations , 2010 .

[12]  Julian M. Allwood,et al.  The mechanics of incremental sheet forming , 2009 .

[13]  Joost Duflou,et al.  Small-scale Finite Element Modelling of the Plastic Deformation Zone in the Incremental Forming Process , 2008 .

[14]  Horst Meier,et al.  Increase of the Dimensional Accuracy of Sheet Metal Parts Utilizing a Model-Based Path Planning for Robot-Based Incremental Forming , 2013 .

[15]  Manabu Gotoh,et al.  Numerical simulation of incremental forming of sheet metal , 2008 .

[16]  Ghulam Hussain,et al.  Electric hot incremental forming: A novel technique , 2008 .

[17]  B. Lu,et al.  Analytical and experimental investigations on deformation mechanism and fracture behavior in single point incremental forming , 2014 .

[18]  Ghulam Hussain,et al.  The performance of flat end and hemispherical end tools in single-point incremental forming , 2010 .

[19]  V. T. Portman,et al.  Stiffness Evaluation of Machines and Robots: Minimum Collinear Stiffness Value Approach , 2011 .

[20]  Bert Lauwers,et al.  Tool path generation for single point incremental forming using intelligent sequencing and multi-step mesh morphing techniques , 2013 .

[21]  A. H. van den Boogaard,et al.  Efficient implicit simulation of incremental sheet forming , 2012 .

[22]  M. Muzzupappa,et al.  Influence of some relevant process parameters on the dimensional accuracy in incremental forming: a numerical and experimental investigation , 2004 .

[23]  Wei Peng,et al.  A deformation analysis and experimental study for a novel full kinematic incremental forming , 2016 .

[24]  S.-D. Liu,et al.  Laminated Steel Forming Modeling Techniques and Experimental Verifications , 2003 .

[25]  T. Obikawa,et al.  Dieless incremental micro-forming of miniature shell objects of aluminum foils , 2009 .

[26]  P. Martins,et al.  Single point incremental forming of PVC: Experimental findings and theoretical interpretation , 2010 .

[27]  Joost Duflou,et al.  Asymmetric single point incremental forming of sheet metal , 2005 .

[28]  Fabrizio Micari,et al.  On-Line Control of Single Point Incremental Forming Operations through Punch Force Monitoring , 2006 .

[29]  Niels Bay,et al.  Creating Helical Tool Paths for Single Point Incremental Forming , 2007 .

[30]  Dongkai Xu,et al.  Mechanism investigation for the influence of tool rotation and laser surface texturing (LST) on formability in single point incremental forming , 2013 .

[31]  Philip Eyckens,et al.  An extended Marciniak–Kuczynski model for anisotropic sheet subjected to monotonic strain paths with through-thickness shear , 2011 .

[32]  Guoquan Tong,et al.  Electric hot incremental forming of Ti-6Al-4V titanium sheet , 2010 .

[33]  Niels Bay,et al.  Theory of single point incremental forming , 2008 .

[34]  F. Micari,et al.  Influence of mechanical properties of the sheet material on formability in single point incremental forming , 2004 .

[35]  G. Centeno,et al.  Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming , 2014 .

[36]  Giuseppina Ambrogio,et al.  On the use of Back-drawing Incremental Forming (BIF) to improve geometrical accuracy in sheet metal parts , 2012 .

[37]  Paulo A.F. Martins,et al.  Revisiting the fundamentals of single point incremental forming by means of membrane analysis , 2008 .

[38]  Wang Bin,et al.  A multipass incremental sheet forming strategy of a car taillight bracket , 2013 .

[39]  Elisabetta Ceretti,et al.  Rapid Prototyping techniques for individualized medical prosthesis manufacturing , 2011 .

[40]  Rolf Dieter Schraft,et al.  Incremental sheet metal forming by industrial robots , 2005 .

[41]  R. J. Alves de Sousa,et al.  On the use of EAS solid‐shell formulations in the numerical simulation of incremental forming processes , 2011 .

[42]  Giuseppe Ingarao,et al.  Analysis of Energy Efficiency of Different Setups Able to Perform Single Point Incremental Forming (SPIF) Processes , 2014 .

[43]  Joost Duflou,et al.  Simulation of a two-slope pyramid made by SPIF using an adaptive remeshing method with solid-shell finite element , 2016 .

[44]  Maria Luisa Garcia-Romeu,et al.  Incremental forming of polymers: Process parameters selection from the perspective of electric energy consumption and cost , 2016 .

[45]  José Velosa De Sena,et al.  Advanced numerical framework to simulate Incremental Forming Processes ; Numerical and experimental studies of asymmetrical Single Point Incremental Forming process , 2015 .

[46]  Giuseppina Ambrogio,et al.  A novel approach based on multiple back-drawing incremental forming to reduce geometry deviation , 2009 .

[47]  Joost Duflou,et al.  Numerical Simulation of a Pyramid Steel Sheet Formed by Single Point Incremental Forming Using Solid-Shell Finite Elements , 2013 .

[48]  Mehdi Vahdati,et al.  Investigation of the ultrasonic vibration effect in incremental sheet metal forming process , 2017 .

[49]  Jun Gu,et al.  Influence of Material Properties on Accuracy Response Surfaces in Single Point Incremental Forming , 2012 .

[50]  Markus Bambach,et al.  Strategies to improve the geometric accuracy in asymmetric single point incremental forming , 2009, Prod. Eng..

[51]  Joost Duflou,et al.  Sheet-metal based molds for low-pressure processing of thermoplastics , 2012 .

[52]  Wilko C. Emmens,et al.  Strain in Shear, and Material Behaviour in Incremental Forming , 2007 .

[53]  Joost Duflou,et al.  Electric Energy Consumption Analysis of SPIF Processes , 2013 .

[54]  Fabrizio Micari,et al.  Shape and dimensional accuracy in Single Point Incremental Forming: State of the art and future trends , 2007 .

[55]  A. H. van den Boogaard,et al.  The technology of Incremental Sheet Forming¿A brief review of the history , 2010 .

[56]  Gabriel Paramo Bermudez,et al.  Comparative analysis between the SPIF and DPIF variants for die-less forming process for an automotive workpiece , 2015 .

[57]  O. C. Zienkiewicz,et al.  The Finite Element Method for Solid and Structural Mechanics , 2013 .

[58]  Joost R. Duflou,et al.  Improved SPIF performance through dynamic local heating , 2008 .

[59]  Joost Duflou,et al.  Advanced feature detection algorithms for incrementally formed sheet metal parts , 2012 .

[60]  Georg Bergweiler,et al.  A novel approach for temperature control in ISF supported by laser and resistance heating , 2013 .

[61]  Dongkai Xu,et al.  A Comparative Study on Process Potentials for Frictional Stir- and Electric Hot-assisted Incremental Sheet Forming☆ , 2014 .

[62]  Francesco Gagliardi,et al.  Formability of lightweight alloys by hot incremental sheet forming , 2012 .

[63]  Paulo A.F. Martins,et al.  Single point incremental forming of polymers , 2009 .

[64]  Nimbalkar D.H.  Review of Incremental Forming of Sheet Metal Components , 2013 .

[65]  Joost Duflou,et al.  Twist revisited: Twist phenomena in single point incremental forming , 2010 .

[66]  Julian M. Allwood,et al.  A structured search for applications of the incremental sheet-forming process by product segmentation , 2005 .

[67]  Ashraf Moh’d Hasan Hadoush,et al.  Efficient simulation and process mechanics of incremental sheet forming , 2010 .

[68]  Joost Duflou,et al.  An experimental study of twist phenomena in single point incremental forming , 2010 .

[69]  Alexander Brosius,et al.  Decoupled Simulation Method For Incremental Sheet Metal Forming , 2007 .

[70]  Paul A. Meehan,et al.  Deformation mechanics and efficient force prediction in single point incremental forming , 2015 .

[71]  Zhaobing Liu,et al.  Vertical Wall Formation and Material Flow Control for Incremental Sheet Forming by Revisiting Multistage Deformation Path Strategies , 2013 .

[72]  Christophe Henrard,et al.  Comparison of the tests chosen for material parameter identification to predict single point incremental forming forces , 2008 .

[73]  Joost Duflou,et al.  Accuracy Improvement in Single Point Incremental Forming through Systematic Study of Feature Interactions , 2011 .

[74]  Ted Belytschko,et al.  Mechanics of fracture in single point incremental forming , 2012 .

[75]  Joost Duflou,et al.  Advances in force modelling for SPIF , 2009 .

[76]  Markus Bambach,et al.  Forming strategies and Process Modelling for CNC Incremental Sheet Forming , 2004 .

[77]  Bert Lauwers,et al.  Medical application of single point incremental forming: cranial plate manufacturing , 2005 .

[78]  P. Martins,et al.  3.02 – Incremental Sheet Forming , 2014 .

[79]  Horst Meier,et al.  A New Robot-Based Sheet Metal Forming Process , 2005 .

[80]  Sigrid Brell-Cokcan,et al.  Design of a Novel End-Effector for Kinematic Support in Incremental Sheet Forming , 2016 .

[81]  Clare Dixon,et al.  Predicting "springback" using 3D surface representation techniques: A case study in sheet metal forming , 2015, Expert Syst. Appl..

[82]  Giuseppe Ingarao,et al.  A sustainability point of view on sheet metal forming operations: material wasting and energy consumption in incremental forming and stamping processes , 2012 .

[83]  Bernd Kuhlenkötter,et al.  On the increase of geometric accuracy with the help of stiffening elements for robot-based incremental sheet metal forming , 2016 .

[84]  Julian M. Allwood,et al.  The Design of an Incremental Sheet Forming Machine , 2005 .

[85]  M. Ham,et al.  Multiscale Analysis of Surface Topography from Single Point Incremental Forming using an Acetal Tool , 2013 .

[86]  Dongkai Xu,et al.  Accumulative-DSIF strategy for enhancing process capabilities in incremental forming , 2012 .

[87]  Jian Cao,et al.  A new methodology for multi-pass single point incremental forming with mixed toolpaths , 2011 .

[88]  M. Muzzupappa,et al.  Application of Incremental Forming process for high customised medical product manufacturing , 2005 .

[89]  Peter Hartley,et al.  An assessment of various process strategies for improving precision in single point incremental forming , 2011 .

[90]  Luigino Filice,et al.  Warm incremental forming of magnesium alloy AZ31 , 2008 .

[91]  Matthew Doolan,et al.  Single point and asymmetric incremental forming , 2015 .

[92]  P. D. Eksteen,et al.  Development of incrementally formed patient-specific titanium knee prosthesis , 2013 .

[93]  Dongkai Xu,et al.  An efficient method for thickness prediction in multi-pass incremental sheet forming , 2015 .

[94]  Bert Lauwers,et al.  Achievable accuracy in single point incremental forming: case studies , 2005 .

[95]  Joost Duflou,et al.  Study of the geometrical inaccuracy on a SPIF two-slope pyramid by finite element simulations , 2012 .

[96]  Gianfranco Palumbo,et al.  Experimental investigations on the single point incremental forming of a titanium alloy component combining static heating with high tool rotation speed , 2012 .

[97]  Matthew Doolan,et al.  Formability in single point incremental forming: A comparative analysis of the state of the art , 2017 .

[98]  Joost Duflou,et al.  High-Speed Single Point Incremental Forming of an Automotive Aluminium Alloy , 2014 .

[99]  Jack Jeswiet,et al.  Initial analysis of cost, energy and carbon dioxide emissions in single point incremental forming – producing an aluminium hat , 2012 .

[100]  Le Van Sy,et al.  Hot incremental forming of magnesium and aluminum alloy sheets by using direct heating system , 2013 .

[101]  Julian M. Allwood,et al.  A Novel Method for the Rapid Production of Inexpensive Dies and Moulds with Surfaces Made by Incremental Sheet Forming , 2006 .

[102]  Bert Lauwers,et al.  Feature Based Approach for Increasing the Accuracy of the SPIF Process , 2007 .

[103]  Jack Jeswiet,et al.  Single point incremental forming at high feed rates and rotational speeds: Surface and structural consequences , 2010 .

[104]  Giuseppina Ambrogio,et al.  An analytical model for improving precision in single point incremental forming , 2007 .

[105]  G. Hussain,et al.  A new formability indicator in single point incremental forming , 2009 .

[106]  Cristian Deac,et al.  The Influence of Geometrical Parameters on the Incremental Forming Process for Knee Implants Analyzed by Numerical Simulation , 2010 .

[107]  Johan Verbert.  Computer Aided Process Planning for Rapid Prototyping With Incremental Sheet Forming Techniques (Computer ondersteunde proces planning voor rapid prototyping met incrementele plaatvormtechnieken) , 2010 .

[108]  Kai Zhong,et al.  Electromagnetic incremental forming (EMIF): A novel aluminum alloy sheet and tube forming technology , 2014 .

[109]  Philip Eyckens,et al.  Marciniak–Kuczynski type modelling of the effect of Through-Thickness Shear on the forming limits of sheet metal , 2009 .

[110]  Christophe Henrard,et al.  Finite Element Modeling of Incremental Forming of Aluminum Sheets , 2005 .

[111]  Joost R. Duflou,et al.  Process window enhancement for single point incremental forming through multi-step toolpaths , 2008 .

[112]  Paul A. Meehan,et al.  Investigation and optimization of deformation energy and geometric accuracy in the incremental sheet forming process using response surface methodology , 2015 .

[113]  Elisabetta Ceretti,et al.  Sheet Incremental Forming: Advantages of Robotised Cells vs. CNC Machines , 2006 .

[114]  Markus Bambach,et al.  Manufacturing of Individualized Cranial Implants Using Two Point Incremental Sheet Metal Forming , 2013 .

[115]  J Jeswiet,et al.  Forming limit diagrams for single-point incremental forming of aluminium sheet , 2005 .

[116]  Jian Cao,et al.  Improvement of Geometric Accuracy in Incremental Forming by Using a Squeezing Toolpath Strategy With Two Forming Tools , 2011 .

[117]  Amar Kumar Behera,et al.  In-Process Hardening in Laser Supported Incremental Sheet Metal Forming , 2012 .

[118]  Joost Duflou,et al.  Single point incremental forming of shape memory polymer foam , 2015 .

[119]  Bert Lauwers,et al.  Tool path generation framework for accurate manufacture of complex 3D sheet metal parts using single point incremental forming , 2014, Comput. Ind..

[120]  Joost Duflou,et al.  Manufacture of Accurate Titanium Cranio-Facial Implants with High Forming Angle Using Single Point Incremental Forming , 2013 .

[121]  Giuseppina Ambrogio,et al.  Considerations on the Incremental Forming of Deep Geometries , 2008 .

[122]  Clare Dixon,et al.  An intelligent process model: predicting springback in single point incremental forming , 2015 .

[123]  R. J. Alves de Sousa,et al.  SPIF-A: on the development of a new concept of incremental forming machine , 2014 .

[124]  Hengan Ou,et al.  Review on the influence of process parameters in incremental sheet forming , 2016 .

[125]  Ana Reis,et al.  Single point incremental forming of a facial implant , 2014, Prosthetics and orthotics international.

[126]  Joost Duflou,et al.  Multivariate Adaptive Regression Splines as a Tool to Improve the Accuracy of Parts Produced by FSPIF , 2011 .

[127]  Steeve Dejardin,et al.  Finite element analysis and experimental investigations for improving precision in single point incremental sheet forming process , 2008 .

[128]  G. Hirt,et al.  Computer-Aided Tool Path Optimization for Single Point Incremental Sheet Forming , 2007 .

[129]  Joost Duflou,et al.  Effect of FEM choices in the modelling of incremental forming of aluminium sheets , 2005 .

[130]  Ricardo J. Alves de Sousa,et al.  Enhancing time efficiency on single point incremental forming processes , 2016 .

[131]  Elisabetta Ceretti,et al.  Part precision improvement in incremental sheet forming of not axisymmetric parts using an artificial cognitive system , 2015 .

[132]  Saeid Amini,et al.  An investigation of conventional and ultrasonic-assisted incremental forming of annealed AA1050 sheet , 2017 .

[133]  J. Allwood,et al.  Incremental Forming of Sandwich Panels , 2007 .

[134]  Alexander Szekeres,et al.  Force Measurement in Pyramid Shaped Parts with a Spindle Mounted Force Sensor , 2007 .

[135]  Amar Kumar Behera,et al.  Shape Feature Taxonomy Development for Toolpath Optimisation in Incremental Sheet Forming (Ontwikkeling van een taxonomie van vormkenmerken voor optimalisatie van gereedschapsbanen voor incrementeel omvormen) , 2013 .

[136]  Toshiyuki Obikawa,et al.  Fabrication of Miniature Shell Structures of Stainless Steel Foil and Their Forming Limit in Single Point Incremental Microforming , 2013, Int. J. Autom. Technol..

[137]  Joost Duflou,et al.  A Comprehensive Analysis of Electric Energy Consumption of Single Point Incremental Forming Processes , 2014 .

[138]  Hengan Ou,et al.  Effect of stress relieving heat treatment on surface topography and dimensional accuracy of incrementally formed grade 1 titanium sheet parts , 2016 .

[139]  Joost Duflou,et al.  Force Analysis for Single Point Incremental Forming , 2007 .

[140]  P. Van Houtte,et al.  Finite Element Modeling of Incremental Forming of Aluminum Sheets , 2005 .

[141]  Nadhir Lebaal,et al.  Tool path optimization for single point incremental sheet forming using response surface method , 2012, Simul. Model. Pract. Theory.

[142]  Philip Eyckens,et al.  Formability in Incremental Sheet Forming: Generalization of the Marciniak-Kuczynski Model (Vervormbaarheid in incrementele plaatvormgeving: veralgemening van het Marciniak-Kuczynski model) , 2010 .

[143]  Maria Luisa Garcia-Romeu,et al.  Force Modeling in Single Point Incremental Forming of Variable Wall Angle Components , 2011 .

[144]  Meftah Hrairi,et al.  Research and Progress in Incremental Sheet Forming Processes , 2011 .

[145]  Jian Cao,et al.  Exergy analysis of incremental sheet forming , 2012, Prod. Eng..

[146]  Bin Lu,et al.  Feature-based tool path generation approach for incremental sheet forming process , 2013 .

[147]  Joost Duflou,et al.  Identification of material parameters to predict Single Point Incremental Forming forces , 2008 .

[148]  Dongkai Xu,et al.  Enhancement of process capabilities in electrically-assisted double sided incremental forming , 2016 .

[149]  Maria Luisa Garcia-Romeu,et al.  Polymer incremental sheet forming process: Temperature analysis using response surface methodology , 2017 .

[150]  C. Henrard,et al.  Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity , 2011 .

[151]  Jun Gu,et al.  Strain evolution in the single point incremental forming process: digital image correlation measurement and finite element prediction , 2011 .

[152]  Fabrizio Micari,et al.  Incremental Forming Process for the Accomplishment of Automotive Details , 2007 .

[153]  I. Ferrer,et al.  The Effect of Process Parameters on the Energy Consumption in Single Point Incremental Forming , 2013 .

[154]  Giuseppina Ambrogio,et al.  Improving industrial suitability of incremental sheet forming process , 2012 .

[155]  Mohammed Nouari,et al.  Numerical Simulation of Incremental Sheet Forming by Simplified Approach , 2011 .

[156]  Francisco S. Melo,et al.  Finding the Best Machine for SPIF Operations - a Brief Discussion , 2011 .

[157]  A. Erman Tekkaya,et al.  The Increased Forming Limits of Incremental Sheet Forming Processes , 2007 .

[158]  Joost Duflou,et al.  Obtainable Accuracies and Compensation Strategies for Robot Supported SPIF , 2009 .

[159]  Johan Verbert,et al.  Laser Assisted Incremental Forming: Formability and Accuracy Improvement , 2007 .

[160]  L. Lamminen.  Incremental Sheet Forming with an Industrial Robot – Forming Limits and Their Effect on Component Design , 2005 .

[161]  Bert Lauwers,et al.  Tool path compensation strategies for single point incremental sheet forming using multivariate adaptive regression splines , 2013, Comput. Aided Des..

[162]  W. C. Emmensa,et al.  An overview of stabilizing deformation mechanisms in incremental sheet forming , 2008 .

[163]  Hiroki Matsuo,et al.  Forming of A5052 Aluminum Alloy Sheets by Friction Stir Incremental Forming , 2011 .

[164]  Joost Duflou,et al.  An Integrated Approach to Accurate Part Manufacture in Single Point Incremental Forming Using Feature Based Graph Topology , 2012 .

[165]  Elisabetta Ceretti,et al.  Preliminary results on Ti incremental sheet forming (ISF) of biomedical devices: biocompatibility, surface finishing and treatment , 2012 .

[166]  Bijan Mollaei Dariani,et al.  Analysis of incremental sheet metal forming using the upper-bound approach , 2012 .

[167]  Philip Eyckens,et al.  MK modelling of sheet formability in the incremental sheet forming process, taking into account through-thickness shear , 2009 .

[168]  Hengan Ou,et al.  Numerical simulation and experimental investigation of ductile fracture in SPIF using modified GTN model , 2015 .

[169]  Jian Cao,et al.  Automatic 3D Spiral Toolpath Generation for Single Point Incremental Forming , 2010 .

[170]  Jong Jin Park,et al.  Formability of magnesium AZ31 sheet in the incremental forming at warm temperature , 2008 .

[171]  J. Duflou,et al.  Material data identification to model the single point incremental forming process , 2010 .

[172]  Wei Liu,et al.  Forming limit diagram prediction of AA5052/polyethylene/AA5052 sandwich sheets , 2013 .

[173]  Matthieu Rauch,et al.  Tool path programming optimization for incremental sheet forming applications , 2009, Comput. Aided Des..

[174]  J. Duflou,et al.  Thickness improvement in single point incremental forming deduced by sequential limit analysis , 2014 .