Geometry effect on mechanical properties and elastic isotropy optimization of bamboo-inspired lattice structures

[1]  Xinwei Li,et al.  Multi‐Level Bioinspired Microlattice with Broadband Sound‐Absorption Capabilities and Deformation‐Tolerant Compressive Response , 2022, Advanced Functional Materials.

[2]  Xinwei Li,et al.  Design, mechanical properties and optimization of lattice structures with hollow prismatic struts , 2022, International Journal of Mechanical Sciences.

[3]  Xinwei Li,et al.  Ceramic microlattice and epoxy interpenetrating phase composites with simultaneous high specific strength and specific energy absorption , 2022, Materials & Design.

[4]  C. Yan,et al.  Topologically optimized lattice structures with superior fatigue performance , 2022, International Journal of Fatigue.

[5]  P. Hazell,et al.  Lessons from nature: 3D printed bio-inspired porous structures for impact energy absorption – a review , 2022, Additive Manufacturing.

[6]  Jianguang Fang,et al.  Mechanical performance of triply periodic minimal surface structures with a novel hybrid gradient fabricated by selective laser melting , 2022, Engineering Structures.

[7]  Zhonghua Li,et al.  Design, mechanical properties, and optimization of BCC lattice structures with taper struts , 2022, Composite Structures.

[8]  Fei Liu,et al.  Shell offset enhances mechanical and energy absorption properties of SLM-made lattices with controllable separated voids , 2022, Materials & Design.

[9]  Motohiro Sato,et al.  Structural rationalities of tapered hollow cylindrical beams and their use in Japanese traditional bamboo fishing rods , 2022, Scientific Reports.

[10]  Bin Ji,et al.  Design and mechanical performances of a novel functionally graded sheet-based lattice structure , 2022, Additive Manufacturing.

[11]  Rashid K. Abu Al-Rub,et al.  On Stiffness, Strength, Anisotropy, and Buckling of 30 Strut‐Based Lattices with Cubic Crystal Structures , 2021, Advanced Engineering Materials.

[12]  L. Bai,et al.  Improved mechanical properties and energy absorption of Ti6Al4V laser powder bed fusion lattice structures using curving lattice struts , 2021, Materials & Design.

[13]  B. Song,et al.  Bamboo-inspired, simulation-guided design and 3D printing of light-weight and high-strength mechanical metamaterials , 2021, Applied Materials Today.

[14]  Lai‐Chang Zhang,et al.  Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges , 2021, Materials Science and Engineering: R: Reports.

[15]  Xia Liu,et al.  Multi-bionic mechanical metamaterials: a composite of FCC lattice and bone structures , 2021, International Journal of Mechanical Sciences.

[16]  Xinwei Li,et al.  Additively Manufactured Deformation‐Recoverable and Broadband Sound‐Absorbing Microlattice Inspired by the Concept of Traditional Perforated Panels , 2021, Advanced materials.

[17]  M. Pham,et al.  The origin of the boundary strengthening in polycrystal-inspired architected materials , 2021, Nature Communications.

[18]  H. Lee,et al.  Microlattice Metamaterials with Simultaneous Superior Acoustic and Mechanical Energy Absorption. , 2021, Small.

[19]  Nan Li,et al.  Optimization of graded filleted lattice structures subject to yield and buckling constraints , 2021, 2103.03372.

[20]  Wesley A. Chapkin,et al.  Mechanical behavior and energy dissipation of infilled, composite Ti-6Al-4V trusses , 2021, Materials & Design.

[21]  N. Takata,et al.  Understanding and suppressing shear band formation in strut-based lattice structures manufactured by laser powder bed fusion , 2021 .

[22]  P. Nithiarasu,et al.  Numerical evaluation of additively manufactured lattice architectures for heat sink applications , 2021, International Journal of Thermal Sciences.

[23]  H. H. Mian,et al.  Experimental and numerical investigation of compressive behavior of lattice structures manufactured through projection micro stereolithography , 2020 .

[24]  B. Bednarcyk,et al.  Bioinspired multilayered cellular composites with enhanced energy absorption and shape recovery , 2020 .

[25]  M. Asgari,et al.  Mechanical performance of additively manufactured uniform and graded porous structures based on topology-optimized unit cells , 2020 .

[26]  Huayan Pu,et al.  Influence of unit cell pose on the mechanical properties of Ti6Al4V lattice structures manufactured by selective laser melting , 2020 .

[27]  C. Mittelstedt,et al.  Architected functionally graded porous lattice structures for optimized elastic-plastic behavior , 2020 .

[28]  Ajeet Kumar,et al.  Design and additive manufacturing of closed cells from supportless lattice structure , 2020 .

[29]  Zhibo Ma,et al.  Mechanical and energy absorption characteristics of additively manufactured functionally graded sheet lattice structures with minimal surfaces , 2020 .

[30]  Yonggang Yao,et al.  A Strong, Tough, and Scalable Structural Material from Fast‐Growing Bamboo , 2020, Advanced materials.

[31]  D. Gu,et al.  Laser 3D printed bio-inspired impact resistant structure: failure mechanism under compressive loading , 2020, Virtual and Physical Prototyping.

[32]  Shiwei Zhou,et al.  On hybrid cellular materials based on triply periodic minimal surfaces with extreme mechanical properties , 2019 .

[33]  S. Kenzari,et al.  Architectural effect on 3D elastic properties and anisotropy of cubic lattice structures , 2019, Materials & Design.

[34]  X. Ren,et al.  Multi-property cellular material design approach based on the mechanical behaviour analysis of the reinforced lattice structure , 2019, Materials & Design.

[35]  C. Yi,et al.  Effective Design of the Graded Strut of BCC Lattice Structure for Improving Mechanical Properties , 2019, Materials.

[36]  Dayong Hu,et al.  Energy-absorption characteristics of a bionic honeycomb tubular nested structure inspired by bamboo under axial crushing , 2019, Composites Part B: Engineering.

[37]  D. Gu,et al.  Optimization of bio-inspired bi-directionally corrugated panel impact-resistance structures: Numerical simulation and selective laser melting process. , 2019, Journal of the mechanical behavior of biomedical materials.

[38]  Minh-Son Pham,et al.  Damage-tolerant architected materials inspired by crystal microstructure , 2019, Nature.

[39]  Guang Fu,et al.  Improved Mechanical Properties and Energy Absorption of BCC Lattice Structures with Triply Periodic Minimal Surfaces Fabricated by SLM , 2018, Materials.

[40]  C. Yan,et al.  Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting , 2018, International Journal of Mechanical Sciences.

[41]  M. Nikzad,et al.  Fabrication of polymeric lattice structures for optimum energy absorption using Multi Jet Fusion technology , 2018, Materials & Design.

[42]  I. Ashcroft,et al.  Effective design and simulation of surface-based lattice structures featuring volume fraction and cell type grading , 2018, Materials & Design.

[43]  Dirk Mohr,et al.  3D Plate‐Lattices: An Emerging Class of Low‐Density Metamaterial Exhibiting Optimal Isotropic Stiffness , 2018, Advanced materials.

[44]  T. Tancogne-Dejean,et al.  Elastically-isotropic elementary cubic lattices composed of tailored hollow beams , 2018, Extreme Mechanics Letters.

[45]  T. Tancogne-Dejean,et al.  Stiffness and specific energy absorption of additively-manufactured metallic BCC metamaterials composed of tapered beams , 2018, International Journal of Mechanical Sciences.

[46]  S. Masood,et al.  Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM , 2018 .

[47]  Vincenzo Crupi,et al.  Static behavior of lattice structures produced via direct metal laser sintering technology , 2017 .

[48]  H. Wadley,et al.  Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness , 2017, Nature.

[49]  R. Hague,et al.  An investigation into reinforced and functionally graded lattice structures , 2017 .

[50]  Martin Leary,et al.  Selective laser melting (SLM) of AlSi12Mg lattice structures , 2016 .

[51]  Zhenze Liu,et al.  A bionic method for the crashworthiness design of thin-walled structures inspired by bamboo , 2016 .

[52]  A A Zadpoor,et al.  Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell. , 2015, Journal of the mechanical behavior of biomedical materials.

[53]  Recep Gümrük,et al.  Static mechanical behaviours of stainless steel micro-lattice structures under different loading conditions , 2013 .

[54]  S. McKown,et al.  Drop weight impact behaviour of sandwich panels with metallic micro lattice cores , 2013 .

[55]  Recep Gümrük,et al.  Compressive behaviour of stainless steel micro-lattice structures , 2013 .

[56]  M. Smith,et al.  Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique , 2013 .

[57]  Darrell Whitley,et al.  A genetic algorithm tutorial , 1994, Statistics and Computing.

[58]  J. J. Moré,et al.  Levenberg--Marquardt algorithm: implementation and theory , 1977 .

[59]  S. Shtrikman,et al.  A variational approach to the theory of the elastic behaviour of multiphase materials , 1963 .

[60]  J. Maxwell,et al.  The Scientific Papers of James Clerk Maxwell: On the Calculation of the Equilibrium and Stiffness of Frames , 1864 .