The CAM as the centre of gravity of the five-axis high speed milling of complex parts
暂无分享,去创建一个
A. Lamikiz | J. Muñoa | L.N. López de Lacalle * | J.A. Sánchez | A. Lamikiz | J. Munoa | J. A. Sánchez | L.N. López de Lacalle *
[1] Yongtae Jun,et al. Interference-free tool path generation in five-axis machining of a marine propeller , 2003 .
[2] Chia-Hsiang Menq,et al. Integrated planning for precision machining of complex surfaces. Part 1: Cutting-path and feedrate optimization , 1997 .
[3] A. Rivero,et al. Process planning for reliable high-speed machining of moulds , 2002 .
[4] Jongwon Kim,et al. Generation of collision-free cutter location data in five-axis milling using the potential energy method , 1997 .
[5] Der Min Tsay,et al. Generation of five-axis cutter paths for turbomachinery components , 2001 .
[6] Zhou Ji,et al. Dynamic Force Modelling for a Ball-End Milling Cutter Based on the Merchant Oblique Cutting Theory , 2001 .
[7] Suk-Hwan Suh,et al. Interference-free tool-path planning for flank milling of twisted ruled surfaces , 1998 .
[8] Robert B. Jerard,et al. Sculptured Surface Machining , 1998 .
[9] Gandjar Kiswanto,et al. Development of a Five-axis Milling Tool Path Generation Algorithm based on Faceted Models , 2003 .
[10] Myung-Chang Kang,et al. Characteristics of Inclined Planes According to the Variations of Cutting Direction in High-Speed Ball-End Milling , 2001 .
[11] Walter Rubio,et al. Calculation of tool paths for a torus mill on free-form surfaces on five-axis machines with detection and elimination of interference , 1998 .
[12] Ming C. Leu,et al. A Verification Program for 5-Axis NC Machining with General APT Tools , 1997 .
[13] L. N. López de Lacalle,et al. Effects of tool deflection in the high-speed milling of inclined surfaces , 2004 .
[14] Sanjeev Bedi,et al. Multi-point tool positioning strategy for 5-axis mashining of sculptured surfaces , 2000, Comput. Aided Geom. Des..
[15] H. T. Loh,et al. Tool-path generation for five-axis machining of free-form surfaces based on accessibility analysis , 2002 .
[16] Jose Antonio Sanchez,et al. Cutting force integration at the CAM stage in the high-speed milling of complex surfaces , 2005, Int. J. Comput. Integr. Manuf..
[17] Hsi-Yung Feng,et al. The prediction of dimensional error for sculptured surface productions using the ball-end milling process. Part 1: Chip geometry analysis and cutting force prediction , 1995 .
[18] Der Min Tsay,et al. Accurate 5-Axis Machining of Twisted Ruled Surfaces , 2001 .