Development of the NEDO implantable ventricular assist device with Gyro centrifugal pump.

The Gyro centrifugal pump, PI (permanently implantable) series, is being developed as a totally implantable artificial heart. Our final goal is to establish a "functional TAH," a totally implantable biventricular assist system (BiVAS) with centrifugal pumps. A plastic prototype pump, Gyro PI 601, was evaluated through in vitro and in vivo studies as a single ventricular assist device (VAD). Based upon these results, the pump head material was converted to a titanium alloy, and the actuator was modified. These titanium Gyro pumps, PI 700 series, also were subjected to in vitro and in vivo studies. The Gyro PI 601 and PI 700 series have the same inner dimensions and characteristics, such as the eccentric inlet port, double pivot bearing system, secondary vane, and magnet coupling system; however, the material of the PI 700 is different from the PI 601. The Gyro PI series is driven by the Vienna DC brushless motor actuator. The inlet cannula of the right ventricular assist system (RVAS) specially made for this system consists of 2 parts: a hat-shaped silicone tip biolized with gelatin and an angled wire reinforced tube made of polyvinylchloride. The pump-actuator package was implanted into 8 calves in the preperitoneal space, bypassing from the left ventricle apex to the descending aorta for the left ventricular assist system (LVAS) and bypassing the right ventricle to the main pulmonary artery for the RVAS. According to the PI 601 feasibility protocol, 2 LVAS cases were terminated after 2 weeks, and 1 LVAS case and 1 RVAS were terminated after 1 month. The PI 700 series was implanted into 4 cases: 3 LVAS cases survived for a long term, 2 of them over 200 days (72-283 days), and 1 RVAS case survived for 1 month and was terminated according to the protocol for a short-term antithrombogenic screening and system feasibility study. Regarding power consumption, the plastic pump cases demonstrated from 6.2 to 12.1 W as LVAS and 7.3 W as RVAS, the titanium pump cases showed from 10.4 to 14.2 W as LVAS and 15.8 W as RVAS. All cases exhibited low hemolysis. The renal function and the liver function were maintained normally in all cases throughout these experimental periods. In the 2 RVAS cases, pulmonary function was normally maintained. No calves demonstrated thromboembolic signs or symptoms throughout the experiments except Case 1 with the plastic pump. However, in the plastic pump cases, bilateral renal infarction was suspected in 2 cases during necropsy whereas no abnormal findings were revealed in the titanium pump cases. There were also no blood clots inside the PI 700 series. As for the 601, the explanted pumps demonstrated slight thrombus formations at the top and bottom pivots except in 1 case. The Gyro PI series, especially the PI 700 series, demonstrated superior performance, biocompatibility, antithrombogenicity and low hemolysis. Also, the durability of the actuator was demonstrated. Based on these results, this titanium centrifugal pump is suitable as an implantable LVAS and RVAS. It is likely that the Gyro PI series is a feasible component of the BiVAS functional TAH.

[1]  Y Nosé,et al.  Hemolytic effect of surface roughness of an impeller in a centrifugal blood pump. , 1997, Artificial organs.

[2]  H. Harasaki,et al.  Endothelialization in blood pumps. , 1978, Transactions - American Society for Artificial Internal Organs.

[3]  Y Nosé,et al.  Development of a totally implantable biventricular bypass centrifugal blood pump system. , 1999, The Annals of thoracic surgery.

[4]  H. Koyanagi,et al.  An emergency balloon occlusion system for a rotary blood pump left ventricular assist system. , 1999, Artificial organs.

[5]  R. Benza,et al.  Infection during circulatory support with ventricular assist devices. , 1999, The Annals of thoracic surgery.

[6]  R Hetzer,et al.  Cardiac recovery in dilated cardiomyopathy by unloading with a left ventricular assist device. , 1999, The Annals of thoracic surgery.

[7]  Y. Ohara,et al.  Hemolytic effect of the secondary vane incorporated into the back side of the impeller. , 1997, Artificial organs.

[8]  W. Santamore,et al.  Left ventricular contributions to right ventricular systolic function during LVAD support. , 1996, The Annals of thoracic surgery.

[9]  G. Baumann,et al.  Mechanical circulatory support for one thousand days or more with the Novacor N100 left ventricular assist device. , 1999, The Journal of thoracic and cardiovascular surgery.

[10]  H Harasaki,et al.  Chronic nonpulsatile blood flow in an alive, awake animal 34-day survival. , 1980, Transactions - American Society for Artificial Internal Organs.

[11]  T. Myers,et al.  Left ventricular assist system as a bridge to myocardial recovery. , 1999, The Annals of thoracic surgery.

[12]  S. Steen,et al.  HeartMate left ventricular assist device as bridge to heart transplantation. , 1998, The Annals of thoracic surgery.

[13]  L. Gray,et al.  Preoperative and postoperative comparison of patients with univentricular and biventricular support with the thoratec ventricular assist device as a bridge to cardiac transplantation. , 1997, The Journal of thoracic and cardiovascular surgery.

[14]  H Harasaki,et al.  Plasma protein and gelatin surface interactions. Kinetics of protein adsorption. , 1987, ASAIO transactions.

[15]  Y Nosé,et al.  Eccentric inlet port of the pivot bearing supported Gyro centrifugal pump. , 2008, Artificial organs.

[16]  Y. Nosé,et al.  Evaluation of platelet adhesion and activation on materials for an implantable centrifugal blood pump. , 1998, Artificial organs.