An intelligent system for predicting HPDC process variables in interactive environment

The selection of optimal parameters in high pressure die casting process (HPDC) has been long recognized as a complex nonlinear problem due to the involvement of a large number of interconnected process variables, each influencing the flow behavior of molten metal inside the die cavity and thus part quality and productivity. In the present work a physical model called Neural Network based Casting Process model (NN-CastPro) has been developed for real time estimation of optimal HPDC process parameters. By submitting a set of four process parameters (having major impact on productivity and part quality) namely, (i) inlet melt temperature, (ii) mold initial temperature, (iii) inlet first phase velocity and (iv) inlet second phase velocity, as input to the NN-CastPro, values for filling time, solidification time and porosity can be obtained simultaneously. The proposed artificial neural network (ANN) model was trained using data generated by ProCast (an FEM-based flow simulation software). The obtained prediction accuracy and enhanced functional capabilities of NN-CastPro show its improved performance over other models available in the literature. (C) 2007 Elsevier B.V. All rights reserved.

[1]  I. H. Katzarov,et al.  Finite element modeling of the porosity formation in castings , 2003 .

[2]  G. P. Syrcos,et al.  Die casting process optimization using Taguchi methods , 2003 .

[3]  S. S. Pande,et al.  A technical note on integrated product quality model using artificial neural networks , 2002 .

[4]  Keith Davey,et al.  Modelling the pressure die casting process using boundary and finite element methods , 1997 .

[5]  Prasad K. Yarlagadda,et al.  Prediction of die casting process parameters by using an artificial neural network model for zinc alloys , 2000 .

[6]  S. H. Huang,et al.  Neural networks in manufacturing: A survey , 1993, Proceedings of 15th IEEE/CHMT International Electronic Manufacturing Technology Symposium.

[7]  George-Christopher Vosniakos,et al.  Simulation-based selection of optimum pressure die-casting process parameters using neural nets and genetic algorithms , 2006 .

[8]  Hanbing Xu,et al.  Fluidity of alloys under high pressure die casting conditions , 2005 .

[9]  Ching-Chih Tai.  The optimization accuracy control of a die-casting product part , 2000 .

[10]  Prasad K. Yarlagadda,et al.  Development of an integrated neural network system for prediction of process parameters in metal injection moulding , 2002 .

[11]  Lars Arnberg,et al.  The heat transfer during filling of a high-pressure die-casting shot sleeve , 2005 .

[12]  Prasad K. Yarlagadda,et al.  Development of a hybrid neural network system for prediction of process parameters in injection moulding , 2001 .

[13]  Prasad K. Yarlagadda,et al.  A neural network system for the prediction of process parameters in pressure die casting , 1999 .

[14]  Timothy Masters,et al.  Practical neural network recipes in C , 1993 .