A new lamination theory for layered textile composites that account for manufacturing induced effects

This paper is concerned with the development of a new lamination theory for layered textile composites that can account for manufacturing induced effects. The theory can be used for the calculation of the effective linear elastic extensional and bending stiffnesses of laminated textile composite panels. A representative unit cell (RUC) of the textile architecture is first identified along with its constituents. Tow geometry is represented analytically taking account of tow undulation. Each tow is modeled as a transversely isotropic linear elastic solid and the contribution from each tow to the RUC elastic bending stiffness is obtained by volume averaging, taking account of the volume fraction of each constituent. The formulation is amenable to the incorporation of geometric changes to the textile architecture that occurs through manufacturing induced consolidation. Predictions of the elastic bending stiffness are compared against experimental data, showing a strong correlation between the analytical model and the experimental results.

[1]  Atef Fahim,et al.  Longitudinal Elastic Modulus Prediction of a 2-D Braided Fiber Composite , 2003 .

[2]  Shu Ching Quek,et al.  Failure mechanics of triaxially braided carbon composites under combined bending–compression loading , 2006 .

[3]  S. White,et al.  Stress analysis of fiber-reinforced composite materials , 1997 .

[4]  Andrew C. Long,et al.  Finite element modelling of fabric compression , 2008 .

[5]  Tsu-Wei Chou,et al.  Nonlinear Behavior of Woven Fabric Composites , 1983 .

[6]  Kevin M. Branch,et al.  Three-dimensional tow inclination model for calculating elastic constants of three-dimensional triaxial braided composites , 1996 .

[7]  Anthony Kelly,et al.  Comprehensive composite materials , 1999 .

[8]  Zheng-Ming Huang,et al.  The mechanical properties of composites reinforced with woven and braided fabrics , 2000 .

[9]  John D. Whitcomb,et al.  General Techniques for Exploiting Periodicity and Symmetries in Micromechanics Analysis of Textile Composites , 2003 .

[10]  Jerome T. Tzeng,et al.  Strength prediction of multi-layer plain weave textile composites using the direct micromechanics method , 2007 .

[11]  Brian Falzon,et al.  A 3-D micromechanical model for predicting the elastic behaviour of woven laminates , 2007 .

[12]  S. Ramakrishna,et al.  Modeling inelastic and strength properties of textile laminates: a unified approach , 2003 .

[13]  Ji Hoon Kim,et al.  Micromechanical modeling of fiber reinforced composites based on elastoplasticity and its application for 3D braided glass/Kevlar composites , 2007 .

[14]  Venkatesh Agaram,et al.  Analysis of 2D triaxial flat braided textile composites , 2003 .

[15]  I. Raju,et al.  Classical laminate theory models for woven fabric composites , 1994 .

[16]  Carl T. Herakovich,et al.  Mechanics of Fibrous Composites , 1997 .

[17]  J. Berthelot,et al.  Composite Materials: Mechanical Behavior and Structural Analysis , 1999 .

[18]  R. M. Christensen,et al.  Effective Stiffness of Randomly Oriented Fibre Composites , 1972 .

[19]  Ignace Verpoest,et al.  On modelling of damage evolution in textile composites on meso-level via property degradation approach , 2007 .

[20]  J. Carey,et al.  Regression-based model for elastic constants of 2D braided/woven open mesh angle-ply composites , 2005 .