High performance membrane-electrode assemblies with ultra-low Pt loading for proton exchange membrane fuel cells

High performance membrane-electrode assemblies (MEAs) with ultra-low Pt loadings have been prepared by a modified thin film method. The method involves a mixing of the carbon supported Pt catalyst with Nafion solution without adding any additional organic solvents and a processing of the MEAs at lower temperatures (<100 °C). The MEAs thus fabricated show high Pt utilization efficiency and power density. The best performance is achieved with a Pt loading of 0.1 mg/cm2 using a 20 wt.% Pt/C. Moreover, the performance loss is not significant even when the Pt loading is reduced further to as low as 0.05 mg/cm2. A scanning electron microscopic analysis reveals that the thin catalyst layers are uniform with a good interfacial continuity between the membrane and the electrodes.

[1]  Sanjeev Mukerjee,et al.  Enhanced electrocatalysis of oxygen reduction on platinum alloys in proton exchange membrane fuel cells , 1993 .

[2]  Chang-Soo Kim,et al.  Performance of a polymer electrolyte membrane fuel cell with thin film catalyst electrodes , 1998 .

[3]  A. K. Shukla,et al.  A vapour-feed direct-methanol fuel cell with proton-exchange membrane electrolyte , 1995 .

[4]  Arunachala Mada Kannan,et al.  Pt-M (M = Fe, Co, Ni and Cu) electrocatalysts synthesized by an aqueous route for proton exchange membrane fuel cells , 2002 .

[5]  Y. Sung,et al.  Nano-composite of PtRu alloy electrocatalyst and electronically conducting polymer for use as the anode in a direct methanol fuel cell , 2003 .

[6]  A. Wokaun,et al.  Oxygen reduction on high surface area Pt-based alloy catalysts in comparison to well defined smooth bulk alloy electrodes , 2002 .

[7]  D. Jung,et al.  Performance of a direct methanol polymer electrolyte fuel cell , 1998 .

[8]  Shimshon Gottesfeld,et al.  Thin-film catalyst layers for polymer electrolyte fuel cell electrodes , 1992 .

[9]  Shimshon Gottesfeld,et al.  High Performance Catalyzed Membranes of Ultra‐low Pt Loadings for Polymer Electrolyte Fuel Cells , 1992 .

[10]  M. Verbrugge.  Selective electrodeposition of catalyst within membrane-electrode structures , 1994 .

[11]  E. Ticianelli,et al.  Effects of the carbon powder characteristics in the cathode gas diffusion layer on the performance of polymer electrolyte fuel cells , 2002 .

[12]  Daniel Guay,et al.  Activation of Various Fe‐Based Precursors on Carbon Black and Graphite Supports to Obtain Catalysts for the Reduction of Oxygen in Fuel Cells , 1997 .

[13]  P. Christensen,et al.  New catalysts for oxygen reduction based on transition-metal sulfides , 1996 .

[14]  Z. Qi,et al.  Low Pt loading high performance cathodes for PEM fuel cells , 2003 .

[15]  Supramaniam Srinivasan,et al.  High performance proton exchange membrane fuel cells with sputter-deposited Pt layer electrodes , 1997 .

[16]  S. Kuwabata,et al.  Charge‐discharge Characteristics of Polypyrrole Films Containing Incorporated Anthraquinone‐1‐Sulfonate , 1992 .

[17]  Jingrong Yu,et al.  Investigation of platinum utilization and morphology in catalyst layer of polymer electrolyte fuel cells , 1999 .

[18]  H. Tributsch,et al.  Energy conversion catalysis using semiconducting transition metal cluster compounds , 1986, Nature.

[19]  Zhigang Qi,et al.  Enhancement of PEM fuel cell performance by steaming or boiling the electrode , 2002 .

[20]  Shimshon Gottesfeld,et al.  Low platinum loading electrodes for polymer electrolyte fuel cells fabricated using thermoplastic ionomers , 1995 .

[21]  V. Antonucci,et al.  An XPS study on oxidation states of Pt and its alloys with Co and Cr and its relevance to electroreduction of oxygen , 2001 .

[22]  Hiroshi Igarashi,et al.  Enhancement of the electrocatalytic O2 reduction on Pt–Fe alloys , 1999 .

[23]  Edson A. Ticianelli,et al.  Methods to Advance Technology of Proton Exchange Membrane Fuel Cells , 1988 .

[24]  M. De Francesco,et al.  Comparison of high surface Pt/C catalysts by cyclic voltammetry , 2002 .

[25]  Jai Prakash,et al.  Investigations of ruthenium pyrochlores as bifunctional oxygen electrodes , 1999 .