A low-power interface circuit for multi-sensor applications

This paper presents a low-power generic readout circuit for capacitive and resistive complementary metaloxide- semiconductor (CMOS) micro-electro-mechanical-system (MEMS) sensors. This readout architecture can be scaled to even more sensors to achieve chip area and power consumption efficient. An incremental sigma-delta analog-to-digital converter (ΣΔ ADC) is used for providing multiplexed digital output. A demonstration chip was implemented in a 0.18-μm CMOS MEMS process, which integrates a three-axis accelerometer, the readout circuit, and an ARM M0 microprocessor. The chip area is 3.5×2.5 mm2 and the interface circuit with ADC draw only 120 mA of current from a 1.8-V supply. A magneto-resistance-type three-axis magnetic sensor is manufactured via extra post processes. This chip is designed to demonstrate a monolithic virtual gyroscope, which is a popular solution for low-power and low-cost inertial applications.

[2]  G. Fedder,et al.  A Low-Noise Low-Offset Capacitive Sensing Amplifier for a 50-g = Hz Monolithic CMOS MEMS Accelerometer , 2004 .

[3]  Gang Zhang,et al.  A post-CMOS micromachined lateral accelerometer , 2002 .

[4]  M. Offenberg,et al.  A surface micromachined silicon gyroscope using a thick polysilicon layer , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[5]  Bernhard E. Boser,et al.  17.6 A Fourth-Order Σ∆ Interface for Micromachined Inertial Sensors , 2004 .

[6]  Ying-Zong Juang,et al.  Digital Offset Trimming Techniques for CMOS MEMS Accelerometers , 2014, IEEE Sensors Journal.

[7]  Ying-Zong Juang,et al.  Implementation of a monolithic capacitive accelerometer in a wafer-level 0.18 µm CMOS MEMS process , 2012 .

[8]  Roger T. Howe,et al.  A modular process for integrating thick polysilicon MEMS devices with sub-micron CMOS , 2003, SPIE MOEMS-MEMS.

[9]  Gabor C. Temes,et al.  Theory and applications of incremental ΔΣ converters , 2004, IEEE Trans. Circuits Syst. I Regul. Pap..

[10]  B.E. Boser,et al.  A fourth-order /spl Sigma//spl Delta/ interface for micromachined inertial sensors , 2004, IEEE Journal of Solid-State Circuits.

[11]  P. Deval,et al.  A Second-Order High-Resolution Incremental A/D Converter with Offst and Charge Injection Compensation , 1987, ESSCIRC '87: 13th European Solid-State Circuits Conference.

[12]  Huikai Xie,et al.  A Monolithic CMOS-MEMS 3-Axis Accelerometer With a Low-Noise, Low-Power Dual-Chopper Amplifier , 2008, IEEE Sensors Journal.

[13]  Bernhard E. Boser,et al.  A three-axis micromachined accelerometer with a CMOS position-sense interface and digital offset-trim electronics , 1999, IEEE J. Solid State Circuits.

[14]  G.K. Fedder,et al.  A low-noise low-offset capacitive sensing amplifier for a 50-/spl mu/g//spl radic/Hz monolithic CMOS MEMS accelerometer , 2004, IEEE Journal of Solid-State Circuits.

[15]  J. S. Yuan,et al.  Low-power CMOS wireless MEMS motion sensor for physiological activity monitoring , 2005, IEEE Transactions on Circuits and Systems I: Regular Papers.