Evaporation Limited Radial Capillary Penetration in Porous Media.

The capillary penetration of fluids in thin porous layers is of fundamental interest in nature and various industrial applications. When capillary flows occur in porous media, the extent of penetration is known to increase with the square root of time following the Lucas-Washburn law. In practice, volatile liquid evaporates at the surface of porous media, which restricts penetration to a limited region. In this work, on the basis of Darcy's law and mass conservation, a general theoretical model is developed for the evaporation-limited radial capillary penetration in porous media. The presented model predicts that evaporation decreases the rate of fluid penetration and limits it to a critical radius. Furthermore, we construct a unified phase diagram that describes the limited penetration in an annular porous medium, in which the boundaries of outward and inward liquid are predicted quantitatively. It is expected that the proposed theoretical model will advance the understanding of penetration dynamics in porous media and facilitate the design of engineered porous architectures.

[1]  N. Fries,et al.  An analytic solution of capillary rise restrained by gravity. , 2008, Journal of colloid and interface science.

[2]  Richard Lucas,et al.  Ueber das Zeitgesetz des kapillaren Aufstiegs von Flüssigkeiten , 1918 .

[3]  Wei Shen,et al.  Thread as a versatile material for low-cost microfluidic diagnostics. , 2010, ACS applied materials & interfaces.

[4]  Abraham Marmur,et al.  Kinetics of penetration into uniform porous media: Testing the equivalent-capillary concept , 2003 .

[5]  Jaclyn A. Adkins,et al.  Recent developments in paper-based microfluidic devices. , 2015, Analytical chemistry.

[6]  N. Fries,et al.  Dimensionless scaling methods for capillary rise. , 2009, Journal of colloid and interface science.

[7]  G. Whitesides,et al.  Polymer microstructures formed by moulding in capillaries , 1995, Nature.

[8]  Jintu Fan,et al.  Geometry-induced asymmetric capillary flow. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[9]  Dimiter N. Petsev,et al.  Potential flow in the presence of a sudden expansion: Application to capillary driven transport in porous media , 2013, Physical Review E.

[10]  J. Dymond Handbook of Physical Properties of Liquids and Gases Pure Substances and Mixtures. Third Augmented and Revised Edition. By N. B. Vargaftik, Y. K. Vinogradov, and V. S. Yargin. Begell House, Inc., New York. 1996. 1359 pp. $165.00. ISBN 1-56700-063-0. , 1999 .

[11]  M. Prat,et al.  Wicking and evaporation of liquids in porous wicks: a simple analytical approach to optimization of wick design , 2014 .

[12]  N. Fries,et al.  The effect of evaporation on the wicking of liquids into a metallic weave. , 2008, Journal of colloid and interface science.

[13]  Plamen Atanassov,et al.  Practical electricity generation from a paper based biofuel cell powered by glucose in ubiquitous liquids , 2014 .

[14]  Jintu Fan,et al.  Optimal design of porous structures for the fastest liquid absorption. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[15]  M Kataja,et al.  Simulation of liquid penetration in paper. , 2006, Physical review. E, Statistical, nonlinear, and soft matter physics.

[16]  Norman R. Morrow,et al.  Recovery of oil by spontaneous imbibition , 2001 .

[17]  E. W. Washburn The Dynamics of Capillary Flow , 1921 .

[18]  K. Jessen,et al.  Theoretical Analysis of Capillary Rise in Porous Media , 2015, Transport in Porous Media.

[19]  A. Clarke,et al.  Spreading and Imbibition of Liquid Droplets on Porous Surfaces , 2002 .

[20]  Michael Dreyer,et al.  Radial Capillary Transport from an Infinite Reservoir , 2010 .

[21]  Yi Zhang,et al.  Imbibition in porous membranes of complex shape: quasi-stationary flow in thin rectangular segments. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[22]  Richard H. Friend,et al.  Inkjet Printed Via‐Hole Interconnections and Resistors for All‐Polymer Transistor Circuits , 2001 .

[23]  On the radial spreading of liquids in thin porous substrates , 1992 .

[24]  T. L. Owens,et al.  Control of microfluidic flow in amphiphilic fabrics. , 2011, ACS applied materials & interfaces.

[25]  G. Whitesides,et al.  Three-dimensional microfluidic devices fabricated in layered paper and tape , 2008, Proceedings of the National Academy of Sciences.

[26]  Jie Hu,et al.  Experimental and numerical studies on liquid wicking into filter papers for paper-based diagnostics , 2015 .

[27]  Abraham Marmur,et al.  Radial Capillary Penetration into Paper: Limited and Unlimited Liquid Reservoirs , 1994 .

[28]  Abraham Marmur,et al.  The radial capillary , 1988 .

[29]  Abraham Marmur,et al.  Characterization of Porous Media by the Kinetics of Liquid Penetration: The Vertical Capillaries Model☆ , 1997 .

[30]  R. Zare,et al.  Glucose-Driven Fuel Cell Constructed from Enzymes and Filter Paper , 2011 .

[31]  Jintu Fan,et al.  Structural optimization of porous media for fast and controlled capillary flows. , 2015, Physical review. E, Statistical, nonlinear, and soft matter physics.

[32]  A. Leipertz,et al.  Density, Surface Tension, and Kinematic Viscosity of Hydrofluoroethers HFE-7000, HFE-7100, HFE-7200, HFE-7300, and HFE-7500 , 2015 .

[33]  Wong,et al.  Interface pinning and the dynamics of capillary rise in porous media. , 1996, Physical review letters.

[34]  Kevin Pennings,et al.  Paper-based microfluidics with an erodible polymeric bridge giving controlled release and timed flow shutoff. , 2014, Lab on a chip.

[35]  Chang‐Hwan Choi,et al.  Cotton fabrics with single-faced superhydrophobicity. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[36]  Xiao Wang,et al.  Paper pump for passive and programmable transport. , 2013, Biomicrofluidics.

[37]  J. Parlange,et al.  Capillary absorption in porous sheets and surfaces subject to evaporation , 2007 .

[38]  E. Kalogianni,et al.  Characterization of porous media by dynamic wicking combined with image analysis , 2012 .

[39]  Won‐Kyo Jung,et al.  Fabrication of cell-penetrable microfibrous matrices with a highly porous structure using a simple fluidic device for tissue engineering , 2016 .