Spread spectrum techniques for wirelessly interrogable passive SAW sensors

Recently surface acoustic wave (SAW) sensors for temperature, pressure, strain, etc. were investigated and tested. They use the change in SAW time delay due to the quantity to be measured. Increasing interest was initiated by the possibility of wireless readout. It is shown here, that the well known spread spectrum techniques (chirp impulse compression, CDMA, etc.) allows an increase of both, sensitivity and accuracy of measurement and a discrimination of several sensors interrogated. Some applications (temperature measurement with mK resolution, coded sensors) are demonstrated. We show some mathematical simulations and preliminary experimental results.

[1]  Leonhard Reindl,et al.  Radio signals for SAW ID tags and sensors in strong electromagnetic interference , 1994, 1994 Proceedings of IEEE Ultrasonics Symposium.

[2]  Wolf-Eckhart Bulst,et al.  Mechanical sensors based on surface acoustic waves , 1994 .

[3]  Leonhard Reindl,et al.  CDMA for wireless SAW sensor applications , 1996, Proceedings of ISSSTA'95 International Symposium on Spread Spectrum Techniques and Applications.

[4]  David Morgan,et al.  Surface-wave devices for signal processing , 1985 .

[5]  Leonhard Reindl,et al.  Wavelet transform with a SAW convolver for sensor application , 1995, 1995 IEEE Ultrasonics Symposium. Proceedings. An International Symposium.