Effect of high-enthalpy atmospheric plasma spraying parameters on the mechanical and wear resistant properties of alumina ceramic coatings

[1]  M. Malagodi,et al.  A Multi-Analytical Non-Invasive Approach to Aqueous Cleaning Systems in Treatments on Bowed String Musical Instruments , 2021, Coatings.

[2]  T. Lampke,et al.  Influence of simultaneous Cr2O3 and TiO2 additions on the microstructure and properties of APS alumina coatings , 2021 .

[3]  S. Joshi,et al.  Erosion Performance of Atmospheric Plasma Sprayed Thermal Barrier Coatings with Diverse Porosity Levels , 2021, Coatings.

[4]  Min Liu,et al.  Preparation and properties of supersonic atmospheric plasma sprayed TiB2−SiC coating , 2021 .

[5]  H. Myalska,et al.  Microstructural, mechanical and tribological properties of finely grained Al2O3 coatings obtained by SPS and S-HVOF methods , 2020 .

[6]  L. Deng,et al.  Effect of spray process on dielectric properties of APS-deposited CaO–B2O3–SiO2 glass-ceramic coatings , 2020 .

[7]  P. Bagde,et al.  Effect of Y2O3 addition on tribological properties of plasma sprayed Al2O3-13% TiO2 coating , 2020 .

[8]  Zehua Zhou,et al.  Thermal-shock resistance of plasma sprayed Al2O3-13 wt%TiO2 coating evaluated by residual strength method , 2019, Surface and Coatings Technology.

[9]  Jian-Jun Huang,et al.  Properties improvement of atmospheric plasma sprayed tungsten coating by annealing , 2019, Surface and Coatings Technology.

[10]  W. Weng,et al.  Influence of pores on mechanical properties of plasma sprayed coatings: Case study of YSZ thermal barrier coatings , 2018, Ceramics International.

[11]  S. Dong,et al.  Lanthanum magnesium hexaluminate thermal barrier coatings with pre-implanted vertical microcracks: Thermal cycling lifetime and CMAS corrosion behaviour , 2018, Ceramics International.

[12]  P. Bagde,et al.  Friction and abrasive wear behaviour of Al2O3-13TiO2 and Al2O3-13TiO2+Ni Graphite coatings , 2018 .

[13]  Longhui Deng,et al.  Effect of spraying power on microstructure and property of nanostructured YSZ thermal barrier coatings , 2018 .

[14]  Liping Huang,et al.  Relationship between cracks and microstructures in APS YSZ coatings at elevated temperatures , 2017 .

[15]  Reza Ghasemi,et al.  Plasma-sprayed nanostructured YSZ thermal barrier coatings: Thermal insulation capability and adhesion strength , 2017 .

[16]  Shuangjian Li,et al.  Comparative study on wear behavior of plasma sprayed Al2O3 coatings sliding against different counterparts , 2017 .

[17]  Min Liu,et al.  Enhanced properties of Al-modified EB-PVD 7YSZ thermal barrier coatings , 2016 .

[18]  M. Szkodo,et al.  Effect of plasma sprayed and laser re-melted Al2O3 coatings on hardness and wear properties of stainless steel , 2016 .

[19]  Bin-shi Xu,et al.  The dependency of microstructure and mechanical properties of nanostructured alumina–titania coatings on critical plasma spraying parameter , 2014 .

[20]  C. Blasi,et al.  Microstructure and mechanical properties of plasma sprayed alumina-based coatings , 2014 .

[21]  A. R. Daud,et al.  Effects of plasma spray parameters on TiO2-coated mild steel using design of experiment (DoE) approach , 2013 .

[22]  A. R. Daud,et al.  Effects of powder size and metallic bonding layer on corrosion behaviour of plasma-sprayed Al2O3-13% TiO2 coated mild steel in fresh tropical seawater , 2013 .

[23]  G. Lu,et al.  Microstructure and properties of Al2O3/TiO2 nanostructured ceramic composite coatings prepared by plasma spraying , 2012 .

[24]  V. Balasubramanian,et al.  Influences of atmospheric plasma spraying parameters on the porosity level of alumina coating on AZ31B magnesium alloy using response surface methodology , 2012 .

[25]  S. Aruna,et al.  Effect of critical plasma spray parameters on the microstructure, microhardness and wear and corrosion resistance of plasma sprayed alumina coatings , 2012 .

[26]  O. Kesler,et al.  Relationship Between Particle and Plasma Properties and Coating Characteristics of Samaria-Doped Ceria Prepared by Atmospheric Plasma Spraying for Use in Solid Oxide Fuel Cells , 2011, Journal of Thermal Spray Technology.

[27]  N. H. Saad,et al.  Impact of Plasma Spray Variables Parameters on Mechanical and Wear Behaviour of Plasma Sprayed Al2O3 3%wt TiO2 Coating in Abrasion and Erosion Application , 2012 .

[28]  Kai-Ts'ung Yang,et al.  Microstructure and mechanical properties of Al2O3–Cr2O3 composite coatings produced by atmospheric plasma spraying , 2011 .

[29]  I. Golosnoy,et al.  Effect of substrate temperature on the microstructure and properties of thick plasma-sprayed YSZ TBCs , 2011 .

[30]  S. Mitrovic,et al.  Evaluation of adhesion/cohesion bond strength of the thick plasma spray coatings by scratch testing on coatings cross-sections ☆ , 2011 .

[31]  S. Tao,et al.  Effect of the thickness on properties of Al2O3 coatings deposited by plasma spraying , 2011 .

[32]  Chonggui Li,et al.  Toughening and strengthening mechanism of plasma sprayed nanostructured Al2O3–13 wt.%TiO2 coatings , 2009 .

[33]  E. Wallin,et al.  α-alumina coatings on WC/Co substrates by physical vapor deposition , 2009 .

[34]  Xian‐Cheng Zhang,et al.  Porosity, mechanical properties, residual stresses of supersonic plasma-sprayed Ni-based alloy coatings prepared at different powder feed rates , 2008 .

[35]  Lin Zhu,et al.  Nanostructured TiN coating prepared by reactive plasma spraying in atmosphere , 2007 .

[36]  Cun-shan Wang,et al.  The resistance to wear and corrosion of laser-cladding Al2O3 ceramic coating on Mg alloy , 2007 .

[37]  V. Cannillo,et al.  Wear behaviour of thermally sprayed ceramic oxide coatings , 2006 .

[38]  J. Wilden,et al.  Process and microstructure simulation in thermal spraying , 2006 .

[39]  O. Sarikaya.  Effect of some parameters on microstructure and hardness of alumina coatings prepared by the air plasma spraying process , 2005 .

[40]  M. Fukumoto,et al.  Fabrication of Silicon Nitride Thick Coatings by Reactive RF Plasma Spraying , 2004 .

[41]  L. Looney,et al.  Residual stress in HVOF thermally sprayed thick deposits , 2004 .

[42]  K. Brinkienė,et al.  Correlations between processing parameters and microstructure for YSZ films produced by plasma spray technique , 2004 .

[43]  S. Chandra,et al.  Effect of substrate temperature on adhesion strength of plasma-sprayed nickel coatings , 2003 .

[44]  N. Padture,et al.  Improved interfacial mechanical properties of Al2O3-13wt%TiO2 plasma-sprayed coatings derived from nanocrystalline powders , 2003 .

[45]  L. Shaw,et al.  Indentation fracture behavior of plasma-sprayed nanostructured Al2O3-13wt.%TiO2 coatings , 2003 .

[46]  Xiao-lei Xu,et al.  High hardness alumina coatings prepared by low power plasma spraying , 2002 .

[47]  N. Alexopoulos,et al.  Tribological behaviour of plasma-sprayed Al2O3 coatings under severe wear conditions , 2000 .

[48]  P. Fauchais,et al.  Plasma spraying using Ar-He-H2 gas mixtures , 1999 .

[49]  D. Wortman,et al.  Relationships between residual stress, microstructure and mechanical properties of electron beam–physical vapor deposition thermal barrier coatings , 1998 .

[50]  K. Sreekumar,et al.  Microstructure, adhesion, microhardness, abrasive wear resistance and electrical resistivity of the plasma sprayed alumina and alumina–titania coatings , 1998 .

[51]  P. Fauchais,et al.  Influence of substrate roughness and temperature on the adhesion/cohesion of alumina coatings , 1996 .

[52]  T. Clyne,et al.  The quenching stress in thermally sprayed coatings , 1991 .

[53]  R. Mcpherson.  On the formation of thermally sprayed alumina coatings , 1980 .