Preparation of Nanocomposite GDC/LSCF Cathode Material for IT-SOFC by Induction Plasma Spraying

Homogeneous mixtures of Ce0.8Gd0.2O1.9 (GDC) and La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) nanopowders were successfully synthesized using induction plasma by axial injection of a solution. The resulting nanocomposite powders consisted of two kinds of nanopowders with different mass ratio of GDC/LSCF, such as 3/7 and 6/4. The morphological features, crystallinity, and the phases of the synthesized powders were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), local energy-dispersive x-ray spectroscopy (EDS) analysis, and x-ray diffraction (XRD). The nanopowders are almost globular in shape with a diameter smaller than 100 nm and their BET specific areas are around 20 m2 g−1. The GDC and LSCF phases are well distributed in the nanopowders. In addition, suspensions, made with the as-synthesized composite nanopowders and ethanol, were used to deposit cathode coatings using suspension plasma spray (SPS). Micro-nanostructures of the coatings are discussed. The coatings are homogeneous and porous (51% porosity) with cauliflower structures.

[1]  F. Tietz,et al.  Evaluation of La–Sr–Co–Fe–O perovskites for solid oxide fuel cells and gas separation membranes , 2000 .

[2]  Maher I. Boulos,et al.  The suspension plasma spraying of bioceramics by induction plasma , 1997 .

[3]  D. Schüler,et al.  Synthesis and Characterization , 2009 .

[4]  F. Gitzhofer,et al.  Porosity determination of ceramic materials by digital image analysis--a critical evaluation. , 2006, Scanning.

[5]  M. Boulos.  RF induction plasma spraying: State-of-the-art review , 1992 .

[6]  Mogens Bjerg Mogensen,et al.  Physical Properties of Mixed Conductor Solid Oxide Fuel Cell Anodes of Doped CeO2 , 1994 .

[7]  D. Perednis,et al.  Microstructural Investigations of Nanostructured La(Sr)MnO3-δ Films Deposited by Electrostatic Spray Deposition , 2004 .

[8]  Meilin Liu,et al.  Nanostructured and functionally graded cathodes for intermediate temperature solid oxide fuel cells , 2004 .

[9]  P. Holtappels,et al.  Fabrication and performance of advanced multi-layer SOFC cathodes , 2002 .

[10]  H. Matsumoto,et al.  High oxide ion conductivity in Fe and Mg doped LaGaO3 as the electrolyte of solid oxide fuel cells , 2006 .

[11]  F. Gitzhofer,et al.  Synthesis and characterization of La0.8Sr0.2MO3−δ (M=Mn, Fe, or Co) cathode materials by induction plasma technology , 2006 .

[12]  S. Chan,et al.  Development of LSCF–GDC composite cathodes for low-temperature solid oxide fuel cells with thin film GDC electrolyte , 2008 .

[13]  E. P. Murray,et al.  Electrochemical performance of (La,Sr)(Co,Fe)O3–(Ce,Gd)O3 composite cathodes , 2002 .

[14]  John A. Kilner,et al.  Optimisation of composite cathodes for intermediate temperature SOFC applications , 1999 .

[15]  Meilin Liu,et al.  Functionally graded cathodes fabricated by sol-gel/slurry coating for honeycomb SOFCs , 2005 .

[16]  Hyun Woo Shim,et al.  Electrochemical performance of Nixx , 2012 .

[17]  G. Schiller,et al.  Preparation of perovskite powders and coatings by radio frequency suspension plasma spraying , 1999 .

[18]  M. J. Day,et al.  Functionally graded composite cathodes for solid oxide fuel cells , 2002 .