Design of thick panels origami-inspired flexible grasper with anti-interference ability

[1]  Rugui Wang,et al.  Self-adaptive Grasping Analysis of a Simulated “Soft” Mechanical Grasper Capable of Self-locking , 2022, Journal of Mechanisms and Robotics.

[2]  Xishuang Jing,et al.  Continuum Manipulator With Rigid-Flexible Coupling Structure , 2022, IEEE Robotics and Automation Letters.

[3]  Xiangyang Wang,et al.  Design and Analysis of a Novel Variable Stiffness Continuum Robot With Built-in Winding-Styled Ropes , 2022, IEEE Robotics and Automation Letters.

[4]  Z. You,et al.  Kirigami-inspired thick-panel deployable structures , 2022, International Journal of Solids and Structures.

[5]  Rongqiang Liu,et al.  A programmable origami-inspired space deployable structure with curved surfaces , 2022, Engineering Structures.

[6]  Yue Yu,et al.  Varying the stiffness of Lamina Emergent Joint through origami and mortise-tenon structure , 2022, Precision Engineering.

[7]  Genliang Chen,et al.  Design and analysis of hybrid-driven origami continuum robots with extensible and stiffness-tunable sections , 2022, Mechanism and Machine Theory.

[8]  Xiaofang Xia,et al.  High-precision Calibration of Camera and IMU on Manipulator for Bio-inspired Robotic System , 2022, Journal of Bionic Engineering.

[9]  F. Rodriguez y Baena,et al.  Adaptive Energy Shaping Control of a Class of Nonlinear Soft Continuum Manipulators , 2022, IEEE/ASME Transactions on Mechatronics.

[10]  Taskin Padir,et al.  Shake and Take: Fast Transformation of an Origami Gripper , 2022, IEEE Transactions on Robotics.

[11]  Yuqi Liu,et al.  A Deep Reinforcement Learning Strategy Combining Expert Experience Guidance for a Fruit-Picking Manipulator , 2022, Electronics.

[12]  Hui Huang,et al.  Sim2real Learning of Obstacle Avoidance for Robotic Manipulators in Uncertain Environments , 2022, IEEE Robotics and Automation Letters.

[13]  Guowu Wei,et al.  Thick-panel Origami Cube , 2021 .

[14]  Gongfa Li,et al.  Grasping posture of humanoid manipulator based on target shape analysis and force closure , 2021, Alexandria Engineering Journal.

[15]  Hesheng Wang,et al.  Visual Servoing of a Cable-Driven Soft Robot Manipulator With Shape Feature , 2021, IEEE Robotics and Automation Letters.

[16]  Siyang Zuo,et al.  Flexible Manipulator with Low-Melting-Point Alloy Actuation and Variable Stiffness. , 2021, Soft robotics.

[17]  Yurong Wang,et al.  Modeling and motion control of an octopus-like flexible manipulator actuated by shape memory alloy wires , 2021, Journal of Intelligent Material Systems and Structures.

[18]  Lifang Qiu,et al.  Design and analysis of Lamina Emergent Joint (LEJ) based on origami technology and mortise-tenon structure , 2021, Mechanism and Machine Theory.

[19]  Mingxiang Ling,et al.  Coupled dynamic modeling of piezo-actuated compliant mechanisms subjected to external loads , 2021 .

[20]  J. Dai,et al.  Design of a novel simulated “soft” mechanical grasper , 2021 .

[21]  Huijuan Feng,et al.  Generalized modeling of origami folding joints , 2021 .

[22]  Han Yuan,et al.  Analytical and numerical methods for the stiffness modeling of cable-Driven serpentine manipulators , 2021 .

[23]  Xinde Li,et al.  A Self-Supervised Learning-Based 6-DOF Grasp Planning Method for Manipulator , 2021, IEEE Transactions on Automation Science and Engineering.

[24]  Dapeng Yang,et al.  Design of an Underactuated Finger Based on a Novel Nine-Bar Mechanism , 2020, Journal of Mechanisms and Robotics.

[25]  Ray Y. Zhong,et al.  Design of a self-adaptive gripper with rigid fingers for Industrial Internet , 2020, Robotics Comput. Integr. Manuf..

[26]  K. Harada,et al.  Variable Compliance Control for Robotic Peg-in-Hole Assembly: A Deep Reinforcement Learning Approach , 2020, Applied Sciences.

[27]  Arash Ajoudani,et al.  A Collaborative Robotic Approach to Autonomous Pallet Jack Transportation and Positioning , 2020, IEEE Access.

[28]  Kai Xu,et al.  A continuum manipulator for continuously variable stiffness and its stiffness control formulation , 2020 .

[29]  Hui Huang,et al.  An Autonomous Fruit and Vegetable Harvester with a Low-Cost Gripper Using a 3D Sensor , 2019, Sensors.

[30]  Calogero M. Oddo,et al.  Tactile Sensing and Control of Robotic Manipulator Integrating Fiber Bragg Grating Strain-Sensor , 2019, Front. Neurorobot..

[31]  Darwin G. Caldwell,et al.  Dexterous Grasping by Manipulability Selection for Mobile Manipulator With Visual Guidance , 2019, IEEE Transactions on Industrial Informatics.

[32]  Xianmin Zhang,et al.  Design of fully decoupled compliant mechanisms with multiple degrees of freedom using topology optimization , 2018, Mechanism and Machine Theory.

[33]  D. Floreano,et al.  Soft Robotic Grippers , 2018, Advanced materials.

[34]  Carmel Majidi,et al.  Autonomous Selection of Closing Posture of a Robotic Hand Through Embodied Soft Matter Capacitive Sensors , 2017, IEEE Sensors Journal.

[35]  Bram Vanderborght,et al.  Self-healing soft pneumatic robots , 2017, Science Robotics.

[36]  Amir Firouzeh,et al.  Grasp Mode and Compliance Control of an Underactuated Origami Gripper Using Adjustable Stiffness Joints , 2017, IEEE/ASME Transactions on Mechatronics.

[37]  Youngjin Choi,et al.  Underactuated Finger Mechanism Using Contractible Slider-Cranks and Stackable Four-Bar Linkages , 2017, IEEE/ASME Transactions on Mechatronics.

[38]  Rui Peng,et al.  Origami of thick panels , 2015, Science.

[39]  Anthony Tzes,et al.  Modelling and Control of Hyper-Redundant Micromanipulators for Obstacle Avoidance in an Unstructured Environment , 2015, J. Intell. Robotic Syst..

[40]  Youngjin Choi,et al.  Robotic index finger prosthesis using stackable double 4-BAR mechanisms , 2013 .

[41]  Bijan Shirinzadeh,et al.  Development of a novel flexure-based microgripper for high precision micro-object manipulation , 2009 .

[42]  Clément Gosselin,et al.  Geometric Design of Three-Phalanx Underactuated Fingers , 2006 .

[43]  Vivek A. Sujan,et al.  Intelligent and Efficient Strategy for Unstructured Environment Sensing Using Mobile Robot Agents , 2005, J. Intell. Robotic Syst..

[44]  Bojan Nemec,et al.  Force control of redundant robots in unstructured environment , 2002, IEEE Trans. Ind. Electron..

[45]  Clément Gosselin,et al.  Analysis of Underactuated Mechanical Grippers , 2001 .

[46]  Y. Nakashima,et al.  A Woodpecker's Tongue-inspired, Bendable and Extendable Robot Manipulator with Structural Stiffness , 2022, IEEE Robotics and Automation Letters.

[47]  S. Nishiwaki,et al.  Design of compliant mechanisms: An explicit topology optimization method using end-constrained spline curves with variable width , 2022, Mechanism and Machine Theory.

[48]  Lifang Qiu,et al.  Creating a flexible continuum robot using origami and mortise-tenon structure , 2022, Mechanism and Machine Theory.

[49]  Xifeng Gao,et al.  An obstacle avoidance algorithm for robot manipulators based on decision-making force , 2021, Robotics Comput. Integr. Manuf..

[50]  Daoming Wang,et al.  Design, analysis and experiment of a passively adaptive underactuated robotic hand with linkage-slider and rack-pinion mechanisms , 2021 .

[51]  Huosheng Hu,et al.  A nonparametric-learning visual servoing framework for robot manipulator in unstructured environments , 2021, Neurocomputing.

[52]  Wenfu Xu,et al.  A Hybrid Hand–Eye Calibration Method for Multilink Cable-Driven Hyper-Redundant Manipulators , 2021, IEEE Transactions on Instrumentation and Measurement.

[53]  Joshua Pinskier,et al.  A novel compliant piezoelectric actuated symmetric microgripper for the parasitic motion compensation , 2021 .

[54]  Mingyuan Yang,et al.  Thick-panel Origami Inspired Forceps for Minimally Invasive Surgery , 2018 .