Deposition and characterization of AZO thin films on flexible glass substrates using DC magnetron sputtering technique

Abstract Al-doped zinc oxide (AZO) thin films were deposited onto flexible ultra-thin glass substrates by using a direct current (DC) magnetron sputtering process. The effects of sputtering power, working pressure and substrate temperature on the morphology and optoelectronic performances of AZO films were investigated. The optimal sputtering power, working pressure and substrate temperature for AZO film were determined to be 100 W, 0.9 Pa and 150 ℃, respectively. Further increasing or decreasing the sputtering power, working pressure and substrate temperature degrades the quality of AZO films. XRD patterns show all as-sputtered AZO thin films are preferred to grow along direction. Moreover, the largest grain size, which depicts the best microstructure of AZO films, matches with the smallest stress value. It can be seen from SEM images that the surface is smooth and dense. The smallest value of the resistivity is 1.784×10−3 Ω cm and the average transmittance of all AZO films in the visible range is about 80%. The X-ray photoelectron spectroscopy spectra show that the amount of Al element in the AZO film is very small.

[1]  Al-doped ZnO thin films deposited by confocal sputtering as electrodes in ZnO-based thin-film transistors , 2016 .

[2]  Zhiyun Zhang,et al.  Influence of deposition temperature on the crystallinity of Al-doped ZnO thin films at glass substrates prepared by RF magnetron sputtering method , 2011 .

[3]  Chunrui Wang,et al.  The effect of substrate temperature on high quality c-axis oriented AZO thin films prepared by DC reactive magnetron sputtering for photoelectric device applications , 2013 .

[4]  W. Stickle,et al.  Handbook of X-Ray Photoelectron Spectroscopy , 1992 .

[5]  L. Rao,et al.  Novel mechanism for high speed growth of transparent and conducting tin oxide thin films by spray pyrolysis , 1993 .

[6]  R. Grigorovici,et al.  Optical Properties and Electronic Structure of Amorphous Germanium , 1966, 1966.

[7]  S. Irvine,et al.  Cadmium Telluride Solar Cells on Ultrathin Glass for Space Applications , 2014, Journal of Electronic Materials.

[8]  Jing-Chie Lin,et al.  Microstructure and characterization of Al-doped ZnO films prepared by RF power sputtering on Al and ZnO targets , 2012 .

[9]  Fabrication and Characterization of Transparent Conductive ZnO:Al Thin Films Deposited on Polyethylene Terephthalate Substrates , 2012 .

[10]  Jiecai Han,et al.  Effects of sputtering power on the properties of Al-doped ZnO films deposited on amorphous silicon films substrate , 2013 .

[11]  Anh Huy Tuan Le,et al.  Influence of working pressure on the structural, optical and electrical properties of sputter deposited AZO thin films , 2015 .

[12]  Jung-Min Kim,et al.  Deposition of Al-doped ZnO films on polyethylene naphthalate substrate with radio frequency magnetron sputtering , 2010 .

[13]  C. Hsu,et al.  Influence of ZnO buffer layer on AZO film properties by radio frequency magnetron sputtering , 2008 .

[14]  Nathan A. Cooling,et al.  Fully roll-to-roll prepared organic solar cells in normal geometry with a sputter-coated aluminium top-electrode , 2016 .

[15]  T. Tseng,et al.  Enhancing the memory window of AZO/ZnO/ITO transparent resistive switching devices by modulating the oxygen vacancy concentration of the top electrode , 2015, Journal of Materials Science.

[16]  S. Garner,et al.  Ultra-slim flexible glass for roll-to-roll electronic device fabrication , 2014 .

[17]  T. Miyata,et al.  Effect of inserting a buffer layer on the characteristics of transparent conducting impurity-doped ZnO thin films prepared by dc magnetron sputtering , 2010 .

[18]  A. Taabouche,et al.  Preparation and characterization of Al-doped ZnO piezoelectric thin films grown by pulsed laser deposition , 2016 .

[19]  R. Murakami,et al.  Dependences of Sputtering Times on the Structural and Electrical Properties of ZnO/Ag/ZnO Thin Films on PET by DC Sputtering , 2013, IEEE Transactions on Nanotechnology.

[20]  H. Hou,et al.  Room temperature preparation of high performance AZO films by MF sputtering , 2013 .

[21]  X Wang,et al.  X-ray photoelectron spectroscopy and auger electron spectroscopy studies of Al-doped ZnO films , 2000 .

[22]  S. K. Sudheer,et al.  Highly conductive and transparent laser ablated nanostructured Al: ZnO thin films , 2010 .

[23]  Y. Chen,et al.  Preparation and photoluminescence studies of high-quality AZO thin films grown on Zno buffered Si substrate , 2016 .

[24]  S. Garner,et al.  Strained Growth of Aluminum-Doped Zinc Oxide on Flexible Glass Substrate and Degradation Studies Under Cyclic Bending Conditions , 2014, IEEE Transactions on Device and Materials Reliability.

[25]  J. Song,et al.  Effects of aluminum doping and substrate temperature on zinc oxide thin films grown by pulsed laser deposition , 2010 .

[26]  E. Fortunato,et al.  Highly stable transparent and conducting gallium-doped zinc oxide thin films for photovoltaic applications , 2008 .

[27]  Ping Feng,et al.  Preparation and characterization of high-transmittance AZO films using RF magnetron sputtering at room temperature , 2014 .

[28]  Yonggang Huang,et al.  Printed Assemblies of Inorganic Light-Emitting Diodes for Deformable and Semitransparent Displays , 2009, Science.

[29]  S. Jadkar,et al.  Influence of RF power on structural, morphology, electrical, composition and optical properties of Al-doped ZnO films deposited by RF magnetron sputtering , 2016, Journal of Materials Science: Materials in Electronics.

[30]  D. Lim,et al.  Structural, electrical and optical properties of ZnO:Al films deposited on flexible organic substrates for solar cell applications , 2007 .

[31]  Michael C. McAlpine,et al.  Highly ordered nanowire arrays on plastic substrates for ultrasensitive flexible chemical sensors. , 2007, Nature materials.

[32]  T. Ren,et al.  Flexible structured high-frequency film bulk acoustic resonator for flexible wireless electronics , 2015 .

[33]  A. Eshaghi,et al.  Optical and electrical properties of aluminum zinc oxide (AZO) nanostructured thin film deposited on polycarbonate substrate , 2014 .

[34]  Cheng-Tang Pan,et al.  Design and fabrication of flexible piezo-microgenerator by depositing ZnO thin films on PET substrates , 2010 .

[35]  Jingwen Yu,et al.  The effect of SiO2 buffer layer on the electrical and structural properties of Al-doped ZnO films deposited on soda lime glasses , 2011 .