Digital image processing method for measuring the residence time distribution in a plasticating extruder

In the present work, a digital image processing (DIP) method was developed to measure the residence time distribution (RTD) in a plasticating extruder. The DIP method is off-line, but it consumes less time and yields more data than the traditional off-line ones, and it avoids the expensive probes and data acquisition systems that are necessary in the on-line and in-line measurements. The correctness of the DIP method was validated by a comparative experiment using silica powder as the tracer. A locally made Buss Kneader equipped with a gear pump system was used herein. The effects of the operating conditions on the RTD in this equipment were also studied. Furthermore, the relationship between the mean residence time and the operating conditions was analyzed. POLYM. ENG. SCI., 47:1108–1113, 2007. © 2007 Society of Plastics Engineers

[1]  Z. Tadmor,et al.  Mixing and residence time distribution in melt screw extruders , 1970 .

[2]  C. Jen,et al.  Application of ultrasound in the determination of fundamental extrusion performance: Residence time distribution measurement , 2003 .

[3]  M. M. Dumoulin,et al.  Residence time distribution in extruders determined by in‐line ultrasonic measurements , 1996 .

[4]  Min-Young Lyu,et al.  Residence time distributions and basic studies of flow and melting in a modular Buss Kneader , 1998 .

[5]  J. White,et al.  Modelling of a Viscous Non-Newtonian Polymer Melt in a List/Buss Kneader and Comparison to Experiment , 1996 .

[6]  José A. Covas,et al.  On-line monitoring of the residence time distribution along a kneading block of a twin-screw extruder , 2004 .

[7]  An-I Yeh,et al.  Modeling residence time distributions for single screw extrusion process , 1998 .

[8]  P. Cassagnau,et al.  Study of mixing of liquid/polymer in twin screw extruder by residence time distribution , 2005 .

[9]  Joseph D. Wright,et al.  Study of particle trajectories, residence times and flow behavior in kneading discs of intermeshing co‐rotating twin‐screw extruders , 2004 .

[10]  H. D. Ruyck.  Modelling of the residence time distribution in a twin screw extruder , 1997 .

[11]  Sebastião V. Canevarolo,et al.  An optical device to measure in-line residence time distribution curves during extrusion , 2002 .

[12]  Bruno Vergnes,et al.  A study of residence time distribution in co‐rotating twin‐screw extruders. Part I: Theoretical modeling , 2003 .

[13]  Philippe Cassagnau,et al.  An ultraviolet method for the determination of the residence time distribution in a twin screw extruder , 1991 .

[14]  George Chao-Chi Chuang,et al.  Effect of screw profile on residence time distribution and starch gelatinization of rice flour during single screw extrusion cooking , 2004 .

[15]  G. C. Walsh,et al.  Residence‐time distribution model for twin‐screw extruders , 1999 .

[16]  Grigore Bozga,et al.  Residence time distribution in a corotating twin-screw extruder , 2000 .

[17]  Han E. H. Meijer,et al.  On the modeling of continuous mixers. Part II: The cokneader , 1990 .

[18]  David Jones,et al.  Digital image processing for measurement of residence time distribution in a laboratory extruder , 2006 .

[19]  J. White,et al.  Simulation of Non-Isothermal Flow in a Modular Buss Kneader and Comparison with Experiment , 1997 .

[20]  Guo-Hua Hu,et al.  One-line measurement of the residence time distribution in screw extruders , 1999 .

[21]  Bruno Vergnes,et al.  A study of residence time distribution in co-rotating twin-screw extruders. Part II: Experimental validation , 2003 .

[22]  D. Todd.  Residence time distribution in twin-screw extruders , 1975 .

[23]  Z. Kembłowski,et al.  Residence time distribution in a real single screw extruder , 1981 .

[24]  G. C. Walsh,et al.  Mean residence time analysis for twin screw extruders , 2000 .

[25]  Zhongbin Xu,et al.  Assessing local residence time distributions in screw extruders through a new in‐line measurement instrument , 2006 .

[26]  Paul Ainsworth,et al.  Influence of process variables on residence time distribution and flow patterns of tarhana in a twin-screw extruder , 1997 .

[27]  An-I Yeh,et al.  Predicting residence time distributions in a single screw extruder from operating conditions , 1999 .

[28]  James L White,et al.  Simulation of linear viscoelastic flow behavior in the Buss Kneader , 1997 .

[29]  Stephen T. Balke,et al.  In-line color monitoring of polymers during extrusion using a charge coupled device spectrometer: Color changeovers and residence time distributions , 2003 .

[30]  James L White,et al.  Simulation of Non-Linear Viscoelastic Flow Behavior in the Buss Kneader , 2000 .

[31]  Mustafa Seker,et al.  Residence time distributions of starch with high moisture content in a single-screw extruder , 2005 .

[32]  David Wolf,et al.  Experimental study of the residence time distribution in plasticating screw extruders , 1976 .

[33]  J. White,et al.  Models of Flow and Experimental Studies on a Modular List/Buss Kokneter , 1995 .

[34]  Min-Young Lyu,et al.  Development of The Modern Buss Kneader and The Study of Its Flow and Mixing Mechanisms , 1998 .