Slope reliability analysis considering spatially variable shear strength parameters using a non-intrusive stochastic finite element method

Abstract This paper proposes a non-intrusive stochastic finite element method for slope reliability analysis considering spatially variable shear strength parameters. The two-dimensional spatial variation in the shear strength parameters is modeled by cross-correlated non-Gaussian random fields, which are discretized by the Karhunen–Loeve expansion. The procedure for a non-intrusive stochastic finite element method is presented. Two illustrative examples are investigated to demonstrate the capacity and validity of the proposed method. The proposed non-intrusive stochastic finite element method does not require the user to modify existing deterministic finite element codes, which provides a practical tool for analyzing slope reliability problems that require complex finite element analysis. It can also produce satisfactory results for low failure risk corresponding to most practical cases. The non-intrusive stochastic finite element method can efficiently evaluate the slope reliability considering spatially variable shear strength parameters, which is much more efficient than the Latin hypercube sampling (LHS) method. Ignoring spatial variability of shear strength parameters will result in unconservative estimates of the probability of slope failure if the coefficients of variation of the shear strength parameters exceed a critical value or the factor of slope safety is relatively low. The critical coefficient of variation of shear strength parameters increases with the factor of slope safety.

[1]  Norbert R. Morgenstern,et al.  Probabilistic stability analysis of a tailings dyke on presheared clay-shale , 2003 .

[2]  Jian Ji,et al.  Modeling 2-D spatial variation in slope reliability analysis using interpolated autocorrelations , 2012 .

[3]  K. Phoon,et al.  Characterization of Geotechnical Variability , 1999 .

[4]  D. Dias,et al.  Probabilistic Analysis of Pressurized Tunnels against Face Stability Using Collocation-Based Stochastic Response Surface Method , 2011 .

[5]  Gordon A. Fenton,et al.  Probabilistic slope stability analysis by finite elements , 2004 .

[6]  D. J. Naylor,et al.  Safety analysis using finite elements , 1998 .

[7]  Tamara Al-Bittar,et al.  Bearing capacity of strip footings on spatially random soils using sparse polynomial chaos expansion , 2011 .

[8]  Guan Rong,et al.  Impact of copula selection on geotechnical reliability under incomplete probability information , 2013 .

[9]  D. Mallants,et al.  Efficient posterior exploration of a high‐dimensional groundwater model from two‐stage Markov chain Monte Carlo simulation and polynomial chaos expansion , 2013 .

[10]  Dian-Qing Li,et al.  A comparative study of three collocation point methods for odd order stochastic response surface method , 2013 .

[11]  Erik H. Vanmarcke,et al.  Random Fields: Analysis and Synthesis. , 1985 .

[12]  Amit Srivastava,et al.  Influence of spatial variability of permeability property on steady state seepage flow and slope stability analysis , 2010 .

[13]  Miroslav Vořechovský,et al.  Simulation of simply cross correlated random fields by series expansion methods , 2008 .

[14]  Peter Lumb,et al.  Safety factors and the probability distribution of soil strength , 1970 .

[15]  E. Vanmarcke.  Probabilistic Modeling of Soil Profiles , 1977 .

[16]  G. L. Sivakumar Babu,et al.  Effect of soil variability on the bearing capacity of clay and in slope stability problems , 2009 .

[17]  Jianye Ching,et al.  Determining the Factors of Safety of Spatially Variable Slopes Modeled by Random Fields , 2013 .

[18]  Yu WangY. Wang,et al.  Practical reliability analysis of slope stability by advanced Monte Carlo simulations in a spreadsheet , 2011 .

[19]  Li Min Zhang,et al.  Characterizing geotechnical anisotropic spatial variations using random field theory , 2013 .

[20]  J. M. Duncan,et al.  Factors of Safety and Reliability in Geotechnical Engineering , 2000 .

[21]  Sung-Eun Cho.  Probabilistic Assessment of Slope Stability That Considers the Spatial Variability of Soil Properties , 2010 .

[22]  S. Isukapalli,et al.  Stochastic Response Surface Methods (SRSMs) for Uncertainty Propagation: Application to Environmental and Biological Systems , 1998, Risk analysis : an official publication of the Society for Risk Analysis.

[23]  Dian-Qing Li,et al.  Stochastic response surface method for reliability analysis of rock slopes involving correlated non-normal variables , 2011 .

[24]  Armen Der Kiureghian,et al.  The stochastic finite element method in structural reliability , 1988 .

[25]  Gordon A. Fenton,et al.  Bearing-capacity prediction of spatially random c ϕ soils , 2003 .

[26]  Kok-Kwang Phoon,et al.  Effect of element sizes in random field finite element simulations of soil shear strength , 2013 .

[27]  G. Stefanou.  The stochastic finite element method: Past, present and future , 2009 .

[28]  Dian-Qing Li,et al.  Extension of Hassan and Wolff method for system reliability analysis of soil slopes , 2013 .

[29]  Dian-Qing Li,et al.  Improved knowledge-based clustered partitioning approach and its application to slope reliability analysis , 2012 .

[30]  Sung-Eun Cho.  Probabilistic analysis of seepage that considers the spatial variability of permeability for an embankment on soil foundation , 2012 .

[31]  Gordon A. Fenton,et al.  Probabilistic infinite slope analysis , 2011 .

[32]  Sung-Eun Cho,et al.  Effects of spatial variability of soil properties on slope stability , 2007 .

[33]  Dian-Qing Li,et al.  Bivariate simulation using copula and its application to probabilistic pile settlement analysis , 2013 .

[34]  Wing Kam Liu,et al.  Random field finite elements , 1986 .

[35]  K. Phoon,et al.  Implementation of Karhunen-Loeve expansion for simulation using a wavelet-Galerkin scheme , 2002 .

[36]  R. Grandhi,et al.  Polynomial Chaos Expansion with Latin Hypercube Sampling for Estimating Response Variability , 2003 .

[37]  Dongxiao Zhang,et al.  Probabilistic collocation method for flow in porous media: Comparisons with other stochastic methods , 2007 .

[38]  Dian-Qing Li,et al.  Effect of spatially variable shear strength parameters with linearly increasing mean trend on reliability of infinite slopes , 2014 .

[39]  E. Vanmarcke,et al.  Random Fields: Analysis and Synthesis (Revised and Expanded New Edition) , 2010 .

[40]  Suzanne Lacasse,et al.  Slope reliability analysis accounting for spatial variation , 2007 .

[41]  Norman Sartorius,et al.  Calgary, Alberta, Canada , 2005 .