Synthesis and Characterization of Low Molecular Weight Chitosan

Chitosan can be widely used in many areas owing to its unique properties, although its poor solubility in water is still a limiting factor. In the present study, low molecular weight chitosan (LMWC) was prepared by degradation with NaClO so that chitosan was able to dissolve in water. Chitosan to liquor ratio, NaClO content, temperature, and time were considered variables of NaClO degradation, and the Box-Behnken design was used to determine optimal conditions. There was good agreement between the experimental data and their predicted counterparts. The optimum conditions for chitosan degradation were estimated to be 1:67.91 of chitosan to liquor ratio, 22.03% of NaClO content, a temperature of 90.3 °C, and a time of 3.07 h. It was found that synthesis under these optimized conditions achieved the lowest molecular weight (10,937.4 Daltons). In addition, Fourier transform infrared spectroscopy, X-ray diffractograms, and thermogravimetric analysis showed that the structure of LMWC was similar to the original chitosan, while the crystallinity and thermal stability decreased after degradation.

[1]  Bao Yang,et al.  Preparation of water-soluble chitosan from shrimp shell and its antibacterial activity , 2009 .

[2]  Bao Yang,et al.  Optimization of conditions for extraction of acid-soluble collagen from grass carp (Ctenopharyngodon idella) by response surface methodology , 2008 .

[3]  P. K. Chattopadhyay,et al.  Optimization of oven toasting for improving crispness and other quality attributes of ready to eat potato-soy snack using response surface methodology , 2007 .

[4]  Y. Guo,et al.  Study on the heterogeneous degradation of chitosan with hydrogen peroxide under the catalysis of phosphotungstic acid , 2007 .

[5]  N. Aslan,et al.  Application of Box-Behnken design and response surface methodology for modeling of some Turkish coals , 2007 .

[6]  M. Rinaudo,et al.  Chitin and chitosan: Properties and applications , 2006 .

[7]  H. Park,et al.  Effect of MW and concentration of chitosan on antibacterial activity of Escherichia coli , 2006 .

[8]  Salmah Yusof,et al.  OPTIMIZATION OF ENZYMATIC CLARIFICATION OF SAPODILLA JUICE USING RESPONSE SURFACE METHODOLOGY , 2006 .

[9]  K. Hu,et al.  Study of the depolymerization behavior of chitosan by hydrogen peroxide , 2004 .

[10]  K. Hu,et al.  The depolymerization mechanism of chitosan by hydrogen peroxide , 2003 .

[11]  Y. Gong,et al.  Study on physical properties and nerve cell affinity of composite films from chitosan and gelatin solutions. , 2003, Biomaterials.

[12]  Yingchien Chung,et al.  Effect of abiotic factors on the antibacterial activity of chitosan against waterborne pathogens. , 2003, Bioresource technology.

[13]  Yumin Yang,et al.  Studies on preparation of oligoglucosamine by oxidative degradation under microwave irradiation , 2003 .

[14]  Yoshiharu Okamoto,et al.  Analgesic effects of chitin and chitosan , 2002 .

[15]  Yumin Du,et al.  Effect of hydrogen peroxide treatment on the molecular weight and structure of chitosan , 2002 .

[16]  N. Rastogi,et al.  Optimised production and utilisation of exopolysaccharide from Agrobacterium radiobacter , 2001 .

[17]  J. Desbrières,et al.  On the influence of deacetylation process on the physicochemical characteristics of chitosan from squid chitin , 2000 .

[18]  L. Block,et al.  Chitosan processing: influence of process parameters during acidic and alkaline hydrolysis and effect of the processing sequence on the resultant chitosan’s properties , 1999 .

[19]  Roland Bodmeier,et al.  Mechanical, water uptake and permeability properties of crosslinked chitosan glutamate and alginate films , 1997 .